My imac 2011 is buffering severely when watching vidieos

youtube has it 2004 model
one vidieo
https://www.youtube.com/watch?v=1FhYsOqzXi8

another one
https://www.youtube.com/watch?v=SNR8NLrTz8I

Hey Michael,

Try this, enter the file explorer mode by choosing the Explorer icon from the Application Tab.

Once in the explorer, hold your finger on the file that you want delete until a menu pops up. Select "Delete" from the prompted menu.

Hope this helps.

please see the vidieo and fix it. GOD BLESS YOU


http://www.youtube.com/watch?v=N6Yg5S0WML8

So what you do you see the tail umder the tail you see a bump that bump is a zip tie so you have to cut the zip tie than you take the zip tie out and pull the fur up so now i want you to watch this vidieo go on you tube and type this in at the top fix my 1998 furby there is a vidieo with a white furby and its took apart and its by the lucky penny shop i hope it helps you because it worked for me i buw non working 1998 furbys and do that to them and i fixed 18 of them so hope is helps bye

You might want to get a faster internet connection to play the videos, alternatively you can reduce the quality of the video and make it load quicker, alternatively you can also download youtube downloader at http://www.downloads.com and download the whole video before you watch it.

You will need to use the copied film as a video source, and the music you want, in digital form, as an audio source. You will then need audio-video editing software to alter the playback speeds of one or both and mix them together.

That's going to take time, learning how to use the software. It will not be quick, or easy, but you will probably be able to find some freeware for the purpose. Free software usually has poor or no documentation, which will make learning harder..

You will need to decide what sort of output format you want, which will mostly depend on where & how you want to watch it in future. This isn't an irrevocable decision: you could save the output as, say, XVid/MP3, and convert it to video CD or any other form later. That's a separate issue..

Just remember that you are choosing to spend effort instead of money. You could always hire this done instead.

Sounds like you have a bad power supply or motherboard. The power supplies in eMachines are not known for reliability, so try testing the system with another one. If you still have no video, you should replace the motherboard.

u will have to go into service menu to set sub brightness be carefull u may do more bad than good write down all valus before atempting to adj.

The emergency brake sequence is simple. First apply your emergency brake, or engage your toggle switch on keep it on for 3-5 seconds then release or disengage for 3-5 seconds then reengage and a couple of seconds later you have vidieo. ENJOY.

Replace C602 on DVD board, noise on 10v line causing problem.