Question about Envision L32W761 32 in. LCD TV

1 Answer

I've lost the remote control for my AOC Envision L32W761. How can I change the menu and input source options using the front panel controls? I'm able to access the menu screen but can't figure out how to select the options on the left side of the screen (i.e., setup, video, audio, features).

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Try navigating the screen using the volume and channel controls. If you still can't get to the left side of the screen then try press the menu button again while on the menu screen to see if it'll navigate you there.
Hope this helps :)

Posted on Apr 20, 2014

  • gemagm Apr 21, 2014

    check the info in the owners manual, it covers use of the controls on the unit

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

TODDAS
  • 431 Answers

SOURCE: I have a 32" AOC Envision L32w761 LCD hdtv with no

need to ck for your 24 volts going to your inverter board if missing ck power supply

Posted on Oct 07, 2011

  • 1 Answer

SOURCE: Envision 32" LCD TV by AOC (Model L32W761) - Dish

try 579

Posted on Dec 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 32" AOC Envision L32w761 LCD hdtv with no


There are only two things that can cause this problem -inverter and T-con. Since you have already replaced the inverter, it can be nothing other than the T-CON or LCD controller. Replacing the same should resolve the problem. On a side note the inverter/T-Con problem can be isolated easily. The purpose of the inverter is only to light up the backlight of the panel. So when it fails you will still have a faint picture that can be seen if you flash a flashlight on the screen. If you would like me to find you the replacement T-con let me know the part number and I will get you the link to the part.

Sep 07, 2011 | Envision L32W761 32 in. LCD TV

1 Answer

What is the comcast remote code for aoc envision tv L32w761


Directly from Comcast.com
AOC 3,010,017,025,044
Hope this helps.

Aug 27, 2011 | AOC Envision L27W461 27 in. HDTV LCD...

1 Answer

Orion TVD2710. Lost remote, can't change signal input


I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv. I hope this helps! -Der Strom

Apr 06, 2010 | Orion STV2763 27" TV

1 Answer

I have a 42 inch aoc flatscreen hdtv. Every thing was working fine until I hit a wrong button on the remote. Now all I get is a no signal message. I have tried every thing, but I cannot get the picture...


If you're on cable then I would think you are connected via a scart, therefore you need to select use your Input button on the remote or the manual button & scroll through the menu & select the AV source.

Nov 02, 2009 | AOC Envision L32W461 32 in. LCD HDTV

1 Answer

Can't get a connect from my emachine to aco l32w761


2 options:

1) Try changing your screen resolution to say 640x480 or 800x600 ..

2) Try it in safe mode also ..

Jan 21, 2009 | Envision L32W761 32 in. LCD TV

2 Answers

How to change from video mode to cable/Antenna Input without a Remote


Alot of Zeniths have menu for that, have you tried to press the channel up button?

May 15, 2007 | Zenith A25A11D 25" TV

Not finding what you are looking for?
Envision L32W761 32 in. LCD TV Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Envision Televison & Video Experts

Cindy Wells

Level 3 Expert

5059 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

bigdawg7299

Level 3 Expert

2559 Answers

Are you an Envision Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...