Question about Sony HVR Video Cameras

Open Question

Power issue/screen when i plug the power cord into the camera it keeps powering on and off, however when i take it out it stays on. Also the touchscreen is unresponsive. Only some parts of the screen will respond

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cpt100
  • 154 Answers

SOURCE: Power cord and battery's support NO power to Video Camera

This incident happens often and damages the camcorder's power board. Replacing power board and some adjustment should resolved the problem. Your cost may run from $175-$225 in US for this model. Whenever you are transfering and connecting to pc, it is recommended to connect AC adapter power for this. Do not rely on a charged battery. Good luck.

Posted on Mar 18, 2007

SOURCE: Hello - Canon ZR80 - auto shut off

****

Posted on Apr 19, 2008

  • 72 Answers

SOURCE: the power on my laptop won't stay on

The jack or AC power pin can be fixed yourself if you're up to it. The part is usually under $10. I've done three (2 Fujitsu' and a Sony. Take your time when you take it apart and take pictures of the disassembly. They will com in very handy when you start to put it all back together again. When you get it fixed invest in a proper cable retention device so the AC power pin doesn't get damaged again. This short Chris Pirillo Video talks about CRDs on laptops.

Posted on Jun 10, 2008

welcomejee
  • 10594 Answers

SOURCE: SONY DCR-TRV20

Yes, Power supply/ charger can be one reason. You can get ACL-15A from following Sony link.
http://servicesales.sel.sony.com/ecom/accessories/web/productSearch.do

Posted on Jun 18, 2008

  • 1 Answer

SOURCE: Elmo TT-02u, Random freezes

The problem is a set bad capacitor that must be replaced by the factory. The units are very critical on the exact amperage that the power supply delivers. We have hundreds of tto2 and a few have had this problem. Elmo is aware of the problem and your warranty should cover the problem.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I turn on my Sony TV, ti stays on about 30 seconds then shuts off, What do you think is wrong?


Do a Power Reset.
1. Turn off TV.
2. Unplug the power cord of the TV from the electrical outlet.
3. Let the TV remain without power for 60 seconds.
4. Plug the power cord back into the electrical outlet. (If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.)
5. Turn on the TV.
If issue persists after doing the steps, reset the TV to factory default settings.
1. Turn on the TV.
2. Using the supplied remote, press and hold the UP arrow button.
3. While holding the UP arrow button press the POWER button on the TV itself.
4. When the TV goes off, release the POWER and UP arrow button.
5. The TV will turn on by itself and the initial setup screen will be displayed. Just follow the on-screen prompts to finish the setup.
Sony KDL 46V5100 random shut off 15 20 sec

Feb 25, 2016 | Sony Televison & Video

1 Answer

Acer Aspire 5536 only gives black screen when i connect power supply


  • Nothing is more annoying than a monitor that refuses to turn on. Make sure your Acer monitor is plugged in to a functioning outlet. If it's plugged into a power strip, try replacing it with a new one or moving the plug to a different outlet. Ensure that both ends of the power cable are plugged in firmly and securely, and that the connection to the monitor is not loose.
Cable Issues
  • Your Acer LCD monitor will usually accept DVI and VGA inputs. If you have an older computer, a VGA cable should work fine. If it doesn't have a VGA port, you'll need to obtain an inexpensive DVI to VGA adapter at your local computer store. A DVI cable, however, is compatible with most modern computers and offers superior picture quality over VGA. Make sure you're using the cable that's compatible with your system, and that you have the proper conversion adapter, if necessary.

Jun 19, 2012 | Computers & Internet

1 Answer

Power plug on chair losing power


The problem may be that the power cord's internals were broken by keeping the wire plugged into the chair at a bad angle That damaged the connection. If this is the case, you may need to purchase a new power cord.

Try shopping online for a replacement or calling the manufacturer.

Jun 01, 2012 | Pyramat Sound Rocker Gaming Chair

1 Answer

My laptop shuts off after i turn it on.why


Does your laptop even begin the boot process where it displays stuff on the screen? Do you hear fans running, disk drives running, see lights, hear the cd drive click once and notice a light that comes on the cd drive door briefly when you press the power button? If not you computer either has a bad power cord, a bad dc power jack where the power cord plugs in, a bad mother board or static build up. 1) lets eliminate static buildup by removing the power cord and the battery then press and hold the power button for 30 seconds. Then replace the power cord but not the battery and hit the power button. If it boots up you had static build up. 2) Take an ink pen and put in in the slot where the power cord plugs into the laptop, if it wiggles loosely then your dc power jack which is soldered onto the motherboard needs to be replaced. 3) If the power jack is tight and when you plug in the power cord if you don't see any lights or hear a fan, disc, cd drive, then you can almost bet your power cord is bad. 4) If the power cord is ok then you have a mother board issue. Normally motherboards will give some beeps or constantly blinking lights when you plug in the power cord and try to boot up. These beeps or blinking lights will tell the technician what is wrong with your computer.

Mar 19, 2012 | Acer Aspire One Netbook 8.9" Notebook

1 Answer

Toshiba 32av502r lcd tv keeps turning on & off, will not stay on. screen is black, but the power light keeps blinking.


The power supply board is the problems and the causes.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Nov 21, 2010 | Toshiba 32AV502R LCD TV

1 Answer

Iiyama prolite e1902wsv white screen , no picture


From time to time, I've the same white screen problem with my IIYAMA E1902WSV.

I can resolve that issue with a reset to factory settings.
1- Turn ON power (blue led)
2- Push on the MENU button and keep the button pushed while
pulling out the power cord.
3- Plug the power cord back while keeping the MENU button
pushed.

You should see the picture again.

Oct 18, 2010 | iiyama ProLite E481S-B 19" LCD Monitor

1 Answer

Moved my 7410 All-in-One - now it won't power on all the way


Perform power reset :
  1. Disconnect the power cord from the back of the product.
  2. Disconnect the power cord from the electrical outlet, and then wait 60 seconds.
  3. Connect the power cord to the electrical outlet.
  4. Connect the power cord to the back of the product.
  5. Press the Power button to turn on the product.If the issue still persists perform the partial reset steps:
    1. Perform a partial reset on the printer. To do this first remove the power supply from the back of the printer. With the power off press and hold the # and 3 keys.
    2. Plug the power back into the printer, keep holding the # and 3 keys till you see “ Partial Reset ” displayed on the printer screenIf the issue still persists, perform the semi full reset of the printer.
      1. Perform a partial reset on the printer. To do this first remove the power supply from the back of the printer. With the power off press and hold the # and 6 keys.
      2. Plug the power back into the printer, keep holding the # and 6 keys till you see “ Semi Full or Semi NVM ” displayed on the printer screen.

Sep 27, 2009 | HP OfficeJet 7410 All-In-One InkJet...

2 Answers

Unit keeps losing power. Cord has power light and


I had the same problem. It was the pin inside the **** clamp that was broken. As I wiggled the plug in the unit the pin would dislodge. eventually the pin got lodged in the 12v power cord.

May 16, 2009 | Magellan RoadMate 700 GPS Receiver

2 Answers

Helpp! exceeded the power limits on its hub port?


try to change a new USB cord, and if it does not work the problem is a device then

Jun 21, 2008 | Vivitar MAGNACAM Binocular

Not finding what you are looking for?
Video Cameras Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

kakima

Level 3 Expert

102366 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...