Question about Mitsubishi WS-65809 65" Rear Projection Television
Your TV most likely has a convergence failure. ( common problem )
Here are some of the most common symptoms and example photos of a convergence problem
Here is a quick test....
Using your original remote go-to the tv settings then goto the convergence section.
Try to adjust the red and then the blue convergence.
You should be able to move them up, down, left, and right.
If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.
Posted on Jun 20, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blue will not Converge
This is the typical convergence problem. There are two IC's that need to be replaced. They are soldered into the printed circuit board. If you have no soldering skills, and are in the US, you can take the model number and go to http://www.ptscorp.com, as they will rebuild or sell you a refurbished board . There is a phone number listed at the site if you need help getting the pricing. Good Luck
Posted on Mar 29, 2007
SOURCE: blue lines on the screen
Remove Convergence / power supply circuit board...replace
convergence IC's with first quality ....either Philips,Toshiba or
best choice = upgrade to Hitachi = CZ 01341....let me know
if you have ? 's............T.
Posted on Feb 12, 2008
The panasonic rear projection convergence repair kit #2 is available for your model at the following link under convergence repair kits which has the ICs and resistors plus detailed instructions.
Posted on Mar 14, 2009
Tips for a great answer:
Jul 16, 2016 | Hitachi Televison & Video
Aug 11, 2011 | Toshiba 57H81 57" Rear Projection...
Oct 28, 2010 | Toshiba 61H70 61" Rear Projection...
Jan 09, 2010 | Hitachi 43UWX10B 43" Rear Projection...
Jul 29, 2008 | Akai PTH5498 54" Rear Projection...
Jan 23, 2008 | Zenith R40W46 40" Rear Projection...
May 21, 2007 | Toshiba 43H70 43" Rear Projection...
386 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: