Question about Saeco Magic Comfort Plus Espresso Machine

1 Answer

I can't get the dreg drawer back in place because a chute on the bre group seems jammed. Can you help?

There was a lot of coffee grounds ll around inside an I have vacuumed these out.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 48 Answers

You cant put the drawer back in its place because the grup is not in the correct possition.To bring the grup to the right possition you need to press the switch that the drawer presses when it is puted correct inside.Look at the drawer and you will see at the back side a knob, see where it enters at the machine (that is the switch).Press the switch with something plastic and the grup will move and stop to the right possition.Now you can put the drawer back on.

Posted on May 04, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 14 Answers

SOURCE: Saeco Easy

I think I have the solution. The "thwok, thwok, thwok" noise is a solenoid opening and then slamming the trap door that dispenses the coffee. Mine had a similar problem.
Upon removing the top, I found that the solenoid, and further that the mount where it attaches to the plastic frame was broken. Basically, the little plastic fin that should hold the lower flange of the solenoid was sheared off. That left the solenoid free to move, and made it impossible to complete the action to move the dispenser trap door.
It looked like there was no easy way to replace that part of the plastic mount, so I epoxied and zip-tied the solenoid into place. It seemed to do the trick. I doubt it will last forever.
-tony

Posted on Jan 29, 2009

PlatoAu
  • 67 Answers

SOURCE: dreg drawer cannot be inserted back to its place...

Take the brew unit out, (press the leaver and swing it back together and put it back in the machine,

Posted on Apr 10, 2009

EsWorld
  • 1618 Answers

SOURCE: Saeco talea touch - grinds & brews coffee into grounds drawer??

Try this, adjust the grind to a coarser setting atleast 2 numbers, then remove brew unit and look behind at white plastic valve, there is a small chamber under valve make sure chamber is clean and that the small discharge from chamber to drain tray is also clear. Then remove shower screen from brew unit and clean if necessary, also check the tube from the shower. Reinsert and test.

Posted on Jul 02, 2009

EsWorld
  • 1618 Answers

SOURCE: SAECO Incanto Sirius Brew Group

When you remove brew unit look on the back you will notice a small latch near the top, make sure it is in the up position.

Posted on Oct 07, 2009

EsWorld
  • 1618 Answers

SOURCE: grinding and dumping coffee without making a cup.

Check the grind it might be too fine, then check the screen under the red o-ring in the brew unit it might be blocked.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Saeco Odea Go and my puck in the dreg drawer are really wet and I have water leaking (brown so with coffee) under the dreg drawer. how I can fix it ?


I recently had this problem. I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if the brew group doesn't move smoothly enough it won't grind the correct amount of beans. Try lubricating and then brewing 2-3 cups to have the machine recalibrate the grind amount.

Jan 12, 2011 | Saeco Odea Go

1 Answer

Saeco Odea: The brew group is jammed possibly due to incorrect insertion? Cannot insert dregs draw and cannot remove the brew group.


I had the same problem. I got around it by inserting just the grounds container (which sits inside the dregs drawer) and powering the machine on. Then the machine reset itself to the home position. It wouldn't do this with the dregs drawer removed, but putting in just the grounds container fooled it into thinking the dregs drawer was inserted. Hope this helps. JRP

Oct 24, 2010 | Saeco Odea Go

2 Answers

Hi, I have a saeco odea giro plus that has just started to leak nearly all of the brewed coffee into the dreg drawer! Any ideas? thanks in advance...


I had a crack in the tube that connected to the brew group that resulted in a similar dumping of coffee in the dregs (and below the dreg drawer and onto the counter) in my Saeco Odea Giro. Replacing the "Saeco Odea Giro Coffee Dispensing Tube, part number 11003468, fixed my problem. You can replace this yourself if you are very handy. These photos are very helpful (The Go seems pretty similar to the Giro.) http://odeago.zxq.net/Odea_Go_Repair/Welcome.html

Aug 04, 2010 | Saeco Odea Giro Plus Coffee Maker

2 Answers

Syncrony Compact Digital unit- Used well for 5 yrs without incident. Currently, after bean grinding and tamping stages, a strange, non metallic rumbling/grinding sound occurs just before the...


First clean the screen and tube on the brew unit, then lube the guides/gear grooves on the brew unit, also lube the o-ring(big red one). Then that should take care of it. You can also try backwashing/degreasing the brew unit if the machine has a preground chute.

Feb 07, 2010 | Gaggia Syncrony Compact Digital Espresso...

1 Answer

Emtied the dreg drawer when the SAECO machine was off.


Chenk the back of the area for the drawer, there might be some grounds preventing the draw from going all the way in to tell the microswitch that it is in place.

Jan 24, 2010 | Gaggia Syncrony Espresso Machine

1 Answer

Machine won't work due to dreg drawer


Check to see if your machine has an "exit chute" or similar area where from the used pucks are ejected. The area might be clogged with used coffee grinds and causing a false reading from the machine.

Dec 14, 2009 | Saeco Royal Digital Plus Coffee...

1 Answer

Continually have message saying dreg drawer is missing but dreg drawer is in place


Remove drawer and clean coffee grounds behind it, there might be something keeping it from reaching the microswitch.

Sep 28, 2009 | Saeco Royal Professional Espresso Machine

1 Answer

Water comes out with the coffee grounds in the dregs drawer


Hi
Inside the door on the right at top center is a lever that goes from - to +. Move the lever towards the + but not all the way.

Apr 10, 2009 | Saeco Magic De Luxe Espresso Machine

1 Answer

SAECO Incanto Sirius Brew Group


When you remove brew unit look on the back you will notice a small latch near the top, make sure it is in the up position.

Feb 03, 2009 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

Saeco italia


ok turn the machine on and wait till warmed up. Open door while machine is on and remove the dreg drawer. This you always need to do when the machine is on otherwise it will not reset.
flashing means dreg drawer steady means coffee beans

Apr 05, 2008 | Saeco Incanto Classic Espresso Machine

Not finding what you are looking for?
Saeco Magic Comfort Plus Espresso Machine Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

espressofixr

Level 1 Expert

16 Answers

just-ice

Level 2 Expert

75 Answers

83bj60

Level 1 Expert

22 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...