Question about Hitachi 42V710 42" Rear Projection HDTV

1 Answer

I have a Mitsubishi WD-73727 dlp TV, picture went out and lamp indicator started flashing red then orange. i replaced the lamp but the problem persits, any help?

Picture went out and got a new lamp, installed new lamp but still get the flashing red then orange lamp indicator, I've tried the system reset button on the front of the tv but no luck. I then removed inspected and reinstalled the new lamp and still no luck. Any ideas to what the problem might be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 418 Answers

Lamp light blinking yellow means lamp door not installed.
Lamp light solid red and TV shut off is lamp error (did not light.)

Posted on May 09, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 65 Answers

SOURCE: Lamp went out on DLP TV

Did you replace the lamp door? A flashing red light is an indication of a door open or an impropely seated lamp. Try removing the lamp and reseating it. Reinstall the door and try turning it on again. Also, you may want to unplug the TV from the power source, count to about 20 and then plug it back up again. This may reset the TV.
Good luck

Posted on Aug 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mitsubishi wd 60735 dlp tv red lamp light


A common issue and it may be your problem is dust and dirt inside the unit---the set intakes air from the front and exhausts it out the rear==I have seen several of these sets where removing rear cover and taking stthe set outside and blowing it with a air compressor clears the issue.

Fans and other critical items that get clogged or coated with a moderate amount of dust will cause this issue.

Jul 17, 2012 | Mitsubishi WD-60735 Projection Television

1 Answer

5738 status light blinks red 5 times then orange 7 times


if it is a 7 then u must replace.

SOURCE: i am a mechanic

Jan 21, 2012 | Mitsubishi WD-65738 DLP TV

1 Answer

Mitsubishi 65" DLP HDTV, Status light is red, no picture


Check your lamp; it may have blown. Sound, no picture and a red light are classis signs a lamp has failed.

Feb 02, 2009 | Mitsubishi WD-62528 62 in. LCD Television

1 Answer

Mitsubishi DLP - model #WD62725


you have mention that after 10-15 seconds T.V starts up, will you give total description of the T.V within that 10-15 seconds?

Aug 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Mitsubishi WD-62525 DLP has no picture


Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold down the Device and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.

For example, 3 flashes, then 7 flashes = 37.


Here are the error codes, and the corresponding problem:

12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected

Feb 03, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Mitsubishi dlp does not get picture


the plug the connects underneath is not connecting right you have to get at the plug and seat it correctly

Dec 08, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Hitachi 42V710 42" Rear Projection HDTV Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...