Question about Raymarine Smartpilot Autopilot St6002 S1g Hydraulic Inboard Pack

Open Question

Sea talk failure

Autopilot sea talk failure on screen fodder gauge going back and forward gps not working

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Installing a Raymarine 8002/6001 on my 2005 Sea Ray 270

If you have a basic knowledge of electronics and can follow instructions. It's easy the hardest part is connecting the pump and bleeding the system.

Posted on Jun 25, 2009

TechnoMarine
  • 132 Answers

SOURCE: sea talk failure

Remove all wiring from 4000 head, hook up only 12V, if seatalk fail continues, it is the head. if seatalk fail goes away, hook in instruments one by one until the bad head is found. Seatalk is 12V red, Ground Screen(bare wire) and Data yellow (pulsing voltage). good luck 847-746-0100 John Barry

Posted on Jan 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Incorrect sea level


That just means the GPS' data is incorrect, you have to write to the company or something.

Jan 12, 2013 | Garmin Aera 795 Americas Aviation GPS -...

1 Answer

Proper wiring for gps


red and green go to 12v.brown and screen go to earth yellow to yellow.

Apr 23, 2009 | Raymarine C80 GPS Receiver

1 Answer

Problems talking to autopilot


I think you use the NMEA output to the autopilot .
The plotter shows you only when you have a seatalkconection with a Raymarine autopilot on you Plotter

Apr 06, 2009 | Raymarine E120 Multifunction GPS Receiver

2 Answers

Installing a Raymarine 8002/6001 on my 2005 Sea Ray 270


If you have a basic knowledge of electronics and can follow instructions. It's easy the hardest part is connecting the pump and bleeding the system.

Feb 19, 2009 | Raymarine St8002 Smartpilot Autopilot...

1 Answer

Radar Displays the image upside down


If this is on the radar screen, you'll have to set your heading alignment on your radar. The radar may be 180 degrees out. if this occurs on the plotter, then if you have a heading sensor attached or an autopilot, your heading may be off.

Feb 03, 2009 | Furuno NavNet vx2 GP1720C GPS Receiver

2 Answers

Auto pilot


difficult is it to install Raymarine 8002 autopilot in 270 Sea Ray

Jan 14, 2009 | Raymarine St8002 Smartpilot Autopilot...

3 Answers

I bought a C80 Raymarine Plotter this has a NMEA pigtail with Brown, Screen, Yellow, Green And White wires I haave also bought a RS 125 Receiver this has a pigtail lead with Red , Green, Yellow, Brown and...


If you have a Raymarine pilot it makes sence to wire it all up to Seatalk. Wire as follows Red to red , silver to silver, yellow to yellow, brown(on rs125) to silver on seatalk buss Green (on rs125) to red on seatalk buss.The above is for the conection between RS125 and C80.
To hook the pilot to system you just need to hook the seatalk lines (red, yellow,silver) from the pilot to the conection with the RS125 and the seatalk cable to the C80.(Color for color).The sea talk connection for your pilot can be picked up from you course computer they are labeld and colored on the unit.
If you are not running a course computer as in the case with the older wheel and tiller pilots you will need to take a sea talk cable and cut it. Once it is cut you will see the red yellow and silver wires and you can tap into there . Remember to connect the cable back together were you cut it. Hope this helps

Dec 15, 2008 | Raymarine C80 GPS Receiver

1 Answer

Raymarine gps sounder


This is a common problem if the GPS is hooked up to an electronic heading sensor such as an autopilot. If the heading sensor is not calibrated properly, the boat will appear to be facing the wrong direction.

If you have an autopilot, consult the installation guide and perform the sea trial procedures. That should get your boat lined up properly.

Jul 17, 2008 | Raymarine GPS

1 Answer

Sea talk failure


Remove all wiring from 4000 head, hook up only 12V, if seatalk fail continues, it is the head. if seatalk fail goes away, hook in instruments one by one until the bad head is found. Seatalk is 12V red, Ground Screen(bare wire) and Data yellow (pulsing voltage). good luck 847-746-0100 John Barry

Jul 14, 2008 | Raymarine A65 Combo GPS...

Not finding what you are looking for?
Raymarine Smartpilot Autopilot St6002 S1g Hydraulic Inboard Pack Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raymarine Boating Experts

Steve
Steve

Level 3 Expert

693 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a Raymarine Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...