Question about Bush 2871NTX 28" TV

1 Answer

Bush 2878N TXSIL : Instruction Manual and Remote ?

This was working fine last night as TV and also playing back from one DVD connected by SCART - just replacing another a few hours before.

Remote has not been working for a long time in spite of tested new batteries.

Now all station tuning has gone but DVD still play fine.

Can I download an Instruction Manual from somewhere at least to retune manually.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,653 Answers
Re: Bush 2878N TXSIL : Instruction Manual and Remote ?

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit

For specific model information visit

Posted on Oct 03, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have lost my remote for my sansui tvm1916a and i want to still use my dvd player, how do i change the imput? pushing the two buttons at once brings up a menu but input isnt an option


If your DVD player is connected to your TV with a SCART cable, your TV should switch to DVD input when you insert a DVD and press' Play'. If you are connected with a standard co-axial aerial cable (fly lead) this wont work and you will need to buy a SCART cable (or new remote) if you wish to continue using your DVD player with this TV.

Hope this helps,


Nov 16, 2010 | Sansui TVM1316 13" TV

1 Answer

Video mode

Does your tv have 21pin scart connector on the back if it does connect with 21pin scart lead to scart connector on dvd player.When play is selected on dvd player tv should swich via pin8 to a/v mode hope this helps

Mar 09, 2010 | Sylvania 6427TE 27" TV

1 Answer

Panasonic tv connected to Dish. How do I switch input to watch DVD's? The remote that I have for the tv doesn't have an input button.

As the sat box got 2 scarts connector on back, or as tv got 2 scart connectors on it if so connect output from dvd to scart connector on sat box or tv when play is selected on dvd tv should auto switch a-v input (21pin scart lead will be required
regards windyhouse

Mar 07, 2010 | Standard (CRT) Televisions

1 Answer

I have a DV player, plugged into the AV2 scart socket but it will not start. The DV player works on another TV set. Do I need to programme it into my Bush TV no:WS6680SIL?

I tried the DVD payer and the scart lead on another TV and so discovered that it is the AV2 socket that is faulty. I am obtaining a quote for repair, in the meantime I can connect with the little cololoured leads instead of the scart.

Sep 17, 2009 | Bush Standard (CRT) Televisions

1 Answer

No picture on Bush WS6667 TV

hello make sure the scart lead is connected tight

Jan 20, 2009 | Bush WS6671 28" TV

1 Answer

Why is my bush tv black and white when i watch a dvd

you are using the svhs scart if it has another scart swap the plug over

Dec 08, 2008 | Standard (CRT) Televisions

1 Answer

Goodmans Tv wont show dvds

Usually with DVD players, picture & no sound, or sound & no picture is caused by the scart lead not being plugged in properly.

Sound pins are at one end of the connector and audio pins at the other.

If you are using scart make sure that the plugs at both ends are pushed in all the way. The plastic part of the plug should just touch the socket.

If you are using S-Video (Round connector with 4 pins) you also need to connect a twin phono-phono (Red & Black or White) lead to carry the audio, as S-Video only carries video.

Feb 09, 2008 | Goodmans 1475TS 14" TV

1 Answer

Can't re patch tv with set top box to watch tv


Ok here goes.

1) Take airial lead from the wall socket in to antenna in on freeview box.

2) connect short usually black airial type lead in to antenna out socket on freeview. plug the other end of this lead in to aerial in on vcr.

3) connect the other end of this aerial type lead to airial plug on the back of tv.

4) now if you have 2 or more scart sockets on the back of tv set plug in the scarts in this order.
Freeview box scart with tv on it connect to scart 1 on tv set.
Freeview box vcr scart connect to vcr in scart socket on vcr.
Vcr scart marked tv plug scart from here to scart 2 on tv
If you have 3 scart sockets on tv you can connect dvd using scart to scart socket 3 on tv.

If Tv has only 1 scart the aerial leads will stay the same as I have stated,
Freeview must go to scart socket on tv set.
leave second scart from freeview to vcr plugged in so you can record freeview by putting vcr to line 1 or AV 1.
you will need to put tv on channel (0) & tune this channel to the video play a tape that you recognise then go to tv tuning & tune tv untill you see video playing then store this on channel (0).

Now to view Dvd you will either need to purchase A scart switch box. Or have keep unpluging freeview scart from tv so you can plug in dvd .

If your tv has red yellow white phono sockets you can plug dvd in to these, you may need to purchase phono leads.

Hope this helps.


Jan 08, 2008 | Standard (CRT) Televisions

1 Answer

Connected wii consule to bush ws6671 tv


If you are connecting via scart lead use scart 1 on the rear of tv set & switch off any other devices connected to tv set.

If you are connecting via phono sockets red, white, yellow,
You will need to select the input on the remote see if remote has AV button you will need to depress this buyyon several times as it will go AV1, AV2, AV3, etc.


Nov 21, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Standard (CRT) Televisions Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bush Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Bush Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides