If you live in North America you can try the Dualit repair center at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
ph 201-439-1700
fx 201-439-1701 info@electra-craft.com www.electra-craft.com
Comments:
Nov 20, 2008
- definitely need to remove coffee oils from your BREW HEAD SCREEN: soak the Brew Head Screen, unscrew from the brew head where the coffee oils come into contact with machine, and filter holder in a coffee oil remover by www.urnex.com or dezcal.
Was this helpful?
Yes
No
Solution #2
posted on Jul 02, 2008
Guest
Rank: Apprentice
Rating: 0%, 0 votes
If you live in North America you can try the Dualit repair center at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
ph 201-439-1700
fx 201-439-1701 info@electra-craft.com www.electra-craft.com
Solution #3
posted on Mar 04, 2008
Guest
Rank: Apprentice
Rating: 0%, 0 votes
Dear Greengirl, I am have the same problem with my machine, and the problem is the o rings, they will need replaced. I have tried to source the o rings here in Dubai, but no joy. Dualit in the UK should have the spares. unfortunately they wont send them outside the UK.
Popular Solutions for Dualit 84024 Espresso Machine
It takes forever to fill up the expresso cups the pump is running but it should squirt out and it...
(More)
It takes forever to fill up the expresso cups the pump is running but it should squirt out and it did in the past i havent had it very long
Made a cup of expresso and steamed the milk. Did not remember to turn know clockwise and shut off...
(More)
Made a cup of expresso and steamed the milk. Did not remember to turn know clockwise and shut off steam. It just fizzled out. Went to make cup the following morning and could not turn knob to closed position (arrow should be at top when steam valve is closed, but in my case the arrow remains on the right side - open position and will not move).