Question about Salter 3007 Aquatronic Digital Scale

Open Question

Error message Batteries fine but screen shows err message

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, on my JB5538 Wristech, even with brand new batteries, the unit never seems to inflate ! It developed this problem about 3 months ago out of the blue. Keep getting Err message. How do I fix it ? Th


either the compressor unit seals are damaged or you have a hole in the inflatable section either way it is not an easy fix and as they have come down in price dramatically over the past year i would suggest buying a new model & chucking this one away

Nov 12, 2014 | Health & Beauty

1 Answer

Digital wrist model # SR303S, shows error 3, has new batteries


Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..contact the manufacturer for service..

Error Description Potential cause and remedy

«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.

---------------------------------------
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.

Jan 04, 2011 | Samsung Health & Beauty

1 Answer

Screen shows ERR. I changed batteries and tried


You're right..This happens often when one changes the battery.Here's what to do :
The ERR message can only be corrected by holding in the DISP/MENU and STOP buttons for two seconds, which results in ALL the material on the recorder being erased. It will say (FOR) for a few minutes while it is erasing everything, then will work again.
Solution found at http://www.amazon.co.uk/Olympus-VN-2100-Digital-Recorder-microphone/dp/B000V3NTEU

Feb 01, 2010 | Olympus VN-4100PC Digital Voice Recorder

1 Answer

Fuji s1, when I power up I get "Err" message on top LCD screen. Batteries are all freshly new.


"Err" message relates to the batteries.
If constantly lit, It's the AA batteries. When flashing, it's the lithium batteries. It can also be the tiny switch in the media door. Try activating it gently with a pointy object to see if the message disappears.

Dec 05, 2009 | Fuji FinePix S1 Pro Digital Camera

4 Answers

"chk" error on screen olympus vn-4100 pc


I had a similar sounding problem my Olympus VN-5000. I would turn it on, it would show "CHK" for a few seconds, and then "ERR." This persisted despite fresh batteries. The "ERR" message reportedly means a memory error. I found a solution, which appears to reformat the memory. Try to press the STOP and DISP/MENU buttons at the same time for about 2 seconds, and then the display should show "FOR". It will supposedly erase the whole memory, but will at least make the device usable again! I hope this solution works for your model...

Jul 20, 2008 | Olympus VN-3100PC Digital Voice Recorder

2 Answers

Err message on my S2 Pro


Try removing the lens, the memory card, and the lithium batteries. With freshly charged AA batteries, turn the camera on. If it comes on without the "err" message in that case, your problem lies with the memory card, the lens, or the lithium batteries. Turn off the camera and add these things until you encounter the problem again.

For a lens, check to make sure the electronic contacts are clean and that the lens gets fully twisted into place, and that if there is an aperture lock, that the aperture is set to the smallest possible aperture (22 or 16, usually).

For the memory card, reformat it elsewhere if it is causing problems. The Fuji S2 is notorious for being picky about memory cards.

Lithium batteries that are slightly run-down can cause all sorts of issues. Your S2 doesn't need to use lithium batteries, except for the built-in flash. You can add an extra AA battery pack to replace the lithium batteries, and that will improve the camera's reliability.

Jun 13, 2008 | Fuji FinePix S2 Pro Digital Camera

2 Answers

Fuji Finepix S2 Pro


Ensure the batteries are the correct kind and chemical makeup (yes it does make a difference!)
try using lithium or alkaline as oppose to standard =]

Otherwise there may be an issue with the camera itself, check for warranty? if it isnt under warranty, document the error message/number, consult the manual AND the support site for the manufacturer.

good luck! =]

Jun 13, 2008 | Fuji FinePix S2 Pro Digital Camera

1 Answer

"ERR. 84"


MY CEMERA BENQ SCREEN ERROE ERR 84 TELL ME DETAIL

Dec 28, 2007 | BenQ DC1500 Digital Camera

Not finding what you are looking for?
Salter 3007 Aquatronic Digital Scale Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Salter Health & Beauty Experts

traccie

Level 1 Expert

15 Answers

ray gallant

Level 3 Expert

50314 Answers

solver2010

Level 3 Expert

923 Answers

Are you a Salter Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...