At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
arched washes are a form of spring washer and load up the nut or screw to prevent it from coming undone
you may have to get spring washers in their place
This can present a problem. You must know what sizes the screws are. Some cameras have more than four kinds of screws on the case. If the screw is too long, then it can touch some component or the circuit board and could cause a short and ruin the camera. Try to find someone with one like you have and get the kinds and sizes of the screws. I have Nikons, Canons, Panasonic, Sony and others and hardly any of the screws are the same in the different brands, or differ in kind such as wood type thread for plastic, fine thread, course thread and others. Plus, the sizes of the screw and the length will vary. The colors can vary as well as the type of head of the screw. Another possibility is to get a broken camera from a site such as Ebay. Buy the camera, remove and use the screws you need, then resell the camera as a repair, as is repair camera.
You need a star screw driver. All lowes and home depo would have a small set of these hex changable that you can take in and out of a screw driver. Ask them at the tool counter for assistnace. You need one of the smallest size star fitting bits.
Went by Future Shop and asked them to show me what kind of screws I needed. The salesperson took one out of a base on display and showed me. I purchased the screws from the hardware store.
×