Question about RTO Image 15.0R Treadmill Walking Belt

1 Answer

Why wont my tredmill stay running? - RTO Image 15.0R Treadmill Walking Belt

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 264 Answers

Hi. I'm Peter, Have you adjusted the tension on the belt? If you have and it's too tight it will cause stress on the belt motor and it will shut down trying to keep the motor from burning up. Of course depending on how old the unit is the motor could be wearing out also. Check the adjustment according to the owners manual. Any other problems will be associated with electronic controls and most likely outside the realm of the average person to repair with out special equipment. Also turn the belt by hand if you can and check the rollers that the belt rides on. If the bearings are bad on any of the rollers then it could also produce a lot of stress on the motor causing it to heat up and have a thermal shutdown just like a belt that is too tight. They also have an emergency shut off switch that may be going bad and tripping. Let me know what you find.

Posted on Apr 19, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While running on tempo tredmill it speeds up by itself then speed comes back down. This keeps happening. it goes faster than someone can run butthe speedo never changes


Please Run the software calibration for easy diagnostic and fix it.
go under the HOOD covert Motor, and follow the steps
God bless you

Oct 07, 2013 | Exercise & Fitness

1 Answer

I have a tredmill that quit.Is there a fuse that could be blown and where is it?


1) Unplug the machine, and test the fuse.
2) See is if there some componenet BURN, such: resistor, diode, capacitor, triac, or SCR. AND tEST IT.
3) See the block diagram, the fuse can be located in the boards, or near to the main switch.
God bless you
6_10_2012_12_54_20_pm.gif

Jun 09, 2012 | FreeMotion Emotion Tredmill Tv Treadmill...

1 Answer

My 775ph spirit tredmill wont unlock from its up right position so i can put down the walking part ..iv folloew the instruction and it wont work any ideas.


Dear Sir:

go to this page from spirit:

http://www.spiritfitness.com/customerservice/video/treadmillvideos.html and see the videos for your specific problem.

Otherwise contact with the phone provided in the section before.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Mar 11, 2012 | Exercise & Fitness

1 Answer

Proform pf 3.6 problems


My tredmill wont unfold - i dont know how? Help??

Feb 29, 2012 | Proform Exercise & Fitness

1 Answer

I have a pro form xp weight loss 620 tredmill and when I turn it on and press start the belt runs for about 1 sec. On the main board in the bottom of the tredmill there is a LED and sometimes it turns off...


Since the motor shroud is off I would like you to manually move the running belt by foot and see if that LED flickers if is does then your speed sensor is working properly. If not then the speed sensor needs to be replaced. The next thing I would be checking is the drive motor, using a fully charge drill battery, lantern battery or even a 9V battery by connecting the two leads coming off the drive motor it should move the motor at approx. 1 mph if it is moving the motor is good. then I suspect the lower board will have to be replaced.

May 17, 2010 | Exercise & Fitness

1 Answer

Error code L5 on schwinn 820p


Landice L9 tredmill, L5 display on screen,belt runs slow and nothing else works to the touch.

May 13, 2010 | Schwinn 820 P Treadmill Silver Service...

2 Answers

Weslo cadence treadmill wont work


I centered the belt on my tredmill and now it wont move at all. I tighted and loosened the belt. motor runs belt wont move

Feb 05, 2010 | Cadence Weslo 825 Treadmill Walking Belt

1 Answer

Hi my tredmill will turn on but moter wont


If elevation will work it's more than likely your motor controller. I would need to know which treadmill you have to help any futher.

Nov 15, 2009 | Exercise & Fitness

1 Answer

I need manual for a Weslo Cadence SL 25 tredmill. I want to know where the fuse is. My treadmill sit in the garage for two years now it wont start, none of the lights come on. The only thing that works is...


Do a search with the following, icon health and fitness, click on customer service, then click on manuals and you should hopefully find it free there.

Jun 29, 2009 | Cadence Exercise & Fitness

Not finding what you are looking for?
RTO Image 15.0R Treadmill Walking Belt Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO Exercise & Fitness Experts

Jim London
Jim London

Level 2 Expert

257 Answers

Howard
Howard

Level 2 Expert

115 Answers

Jax Planet
Jax Planet

Level 2 Expert

922 Answers

Are you a RTO Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...