Question about Epson Workforce Pro Wp-4540 All-in-one Printer W/inks brand New

Open Question

Air bubble in epson 4540

I have an air bubble in the blue ink tube and it is not coming out even after several cleaning cycles. I am not able to access the cartridge like the older models so I cannot **** the air our. Can someone offer a solution?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Epson aculaser c1100 cant access empty ink cartridge.

go to the reset menu (right arrow and then down arrow until reset menu is displayed) on the lcd display and then choose change toner #(right arrow until the desired toner is displayed) Hope this helps

Posted on Oct 04, 2007

  • 4102 Answers

SOURCE: epson stylus color 760 failing to print.

you can take it to repair shop and they will clean the head for you with some cleaning fluid if it has been without ink for a while sometimes these get blocked but it is not worth replacing cus would cost more than the printer as the ink cartridge you brought was originall then this isnt the problem check all cables if not better off buying new printer as these are not made to last long sorry couldnt be any,more help...........................

Posted on Nov 05, 2007

eclark317
  • 159 Answers

SOURCE: Clean "Waste Ink Cartridge" Epson R300

Had the same problem. (its a work around without removing the waste ink pad)
Took alot of work but I fixed it.
Frist thing you need to know that error means your ink waste pad is full. Its a $75.00 to replace but there is a work around it.
You will need this free app. SSC service utitlty.
http://inkjetprinterhelp.us/epsonSSC.html Its a great app.
Instrusctions are on the website there.
You will also have to Open the access panel on the rear of the printer (remove screw) and look inside carefullly with a flashlight. You will see a tube (down and to your left) coming from the cleaning pump and it will have an open end on it. This is the tube that delivers ink to the waste pad.
Use a piece of coat hanger wire or equivalent, and fish out this piece of tube. Bring it to the outside of the printer, thru the access panel.
Find yourself a suitable container (Tupperware or a plastic cup or jar) that is not too tall. Put the tube into this container and secure the tube and container so they won’t come apart or lose connection if the printer is moved.
If you wish you can make a hole or notch in the access panel cover so it can be replaced.

Posted on Feb 14, 2009

  • 11 Answers

SOURCE: Epson CX8400 ink cartridges run out early

Epson gives you a miserable 12 ml of ink. Then it reports empty when there is still 10-15% of the ink left. I saw someone set up a brand new CX8400, print a single 4x6 photo and it said he was out of cyan. I use reusable cartridges from http://www.ccs-digital.com They hold 20 ml, which is 2/3 more ink. The chips automatically reset to full if you take the cartridge out and put it back in, so you get to use every drop. The ink is in a separate container inside the main cartridge. When it's really empty, you pop out the ink tank and pop in a new one. The tanks are under $3 each. I think this is brilliant because it's like refilling only it avoids the risks and mess of refills.

Posted on Jul 07, 2009

  • 1 Answer

SOURCE: after cleaning cycle ink cartridges are rendered invalid

I've had the same problem over the years and somewhere along the way came across this simple fix: when you get the "invalid ink cartridge" message turn the printer off, wait 10 seconds, turn it back on, when the screen switches from "please wait" back to "invalid ink cartridge" tap the pause button. this will somehow reset the printer and you should be good to go.

Posted on Feb 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson xp 305 help


It's quite likely that at some point in time you will have attempted to print in black only to receive an error message that you cannot print until a colour cartridge is replaced.
"If ink is not in the tubes from the head to the cartridge, air will be sucked in and therefore cause damage to the print head. This is because the nozzles are in the print head and not in the cartridge. "
What Epson are basically saying is... if this safeguard was not in place, and you sent a print request for black when a colour cartridge was empty, there is a risk of air being pulled into the printhead. This air will ruin the vacuum effect needed for the printhead to pull ink in, meaning your printhead would be at risk of never printing again.
Additionally, if any air is allowed go get into the aformentioned tubes from the head to the cartridge, any remaining ink will coagulate. Just in case you're not a scientist - coagulation in a tube/cartridge is bad, and will lead to you not being able to print again with that cartridge, or to a blocked nozzle/printhead which will require a significant amount of cleaning cycles to budge.

Aug 08, 2014 | Epson Expression XP-305 Inkjet...

1 Answer

Streaking on photo plots on a 1050c


Streaks can come from several sources. Since you said they appear near the end of a plot, the print heads may be running out of ink before the end of the job. This would happen if you had air in the ink tube system and consequently in the heads. When the printer is idle for a while, ink will migrate to the bottom of the print head so when you print again it is ok for the first part of the plot and then gets to the air bubble.

Open the back door of the plotter and look for air bubbles in the ink supply lines. If air is present, it needs to come out. There is a purging tool at Designjet Ink Tube Priming Tool . The print heads may need to be replaced, but not before the tube system is clean.

May 25, 2012 | HP DesignJet 1050c plus InkJet Printer

1 Answer

Cant print anything after replacing ink cartidges for brother 240c


If the printer has been sitting without use for a long time you may need a new printhead, if you just changed inks it could be just an air bubble in the ink tubes. If after several cleaning cycles you don't see any improvement, it's the printhead and not just a bubble.

Feb 22, 2010 | Brother Multi-Function Center MFC-240C...

2 Answers

Dx8400 printer, red ink not working, fitted new cartridges blue yellow and black work but no red, done all the print head cleaning and nozzle checks but no luck


Possibility is that the nozzle might have been clogged. try to perform a cleaning cycle for about 3 to 4 times if it still does not work reseat the ink cartridge affected

Sep 23, 2009 | Epson Office Equipment & Supplies

1 Answer

Black ink is not dispensing


There may be an air bubble in the black tubing, it will take several more cleaning cycles to clear. You can tell it to clean only the black and save the other inks.

Jul 01, 2009 | Brother MFC 490cw Color Inkjet...

1 Answer

I have air bubbles in the black ink feed tube on my brother mfc 210 c printer and it won't print. I have run the cleaning problem several times but it didn't help. The color inks print fine.


You've almost answered your own question! Try ruling out the ink cart first (preferrably with an Original Brother cart). If the cleaning cycle does not resolve it then it's really an engineer job.
Not much else you can do, unless you know how to take apart the machine.

Jun 19, 2009 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

C84 not printing


I assume that before the old cartridges ran out of ink, everything was printing normally. If so, the usual reason for this problem after a cartridge change is getting air into the print head system. Did you do a proper cartridge replace process, which finished with an ink charging cycle? Have you tried running 2 or three head cleaning cycles? If not do it, then run a nozzle check. Any sign of ink - yes - then things are OK you've just got to get the ink flowing properly. Run a couple more cleaning cycles then leave it to rest for 24 hours to let the air bubbles disperse. Then try again.

If you get no sign of ink after these processes report back.

Jan 18, 2009 | Epson Stylus C84 InkJet Printer

1 Answer

Changed all ink cartridges, now only black and blue print


Sounds like your printhead is clogged. Since it isn't removable on this printer the following is a last ditch somewhat messy possible fix.
Here is the procedure that got my CX4600 printer working again:

Symptoms: head cleaning made the test pattern get worse instead of better, until I got no test pattern at all.

1. Unscrew the service panel door on the back of the unit to expose the waste tubes.
2. The direction of flow is "down from the TOP tube, into the plastic elbow, out to the RIGHT tube that goes to the waste repository".
3. Disconnect the plastic elbow from both tubes.
4. Clean the elbow using a paper clip and peroxide until it is completely unclogged and clean.
5. Get a waste receptacle, such as a small cup or something to catch the ink, and place it under the TOP tube. You will probably have to aim the tube with your fingers or a pair of pliers into the cup. The waste is going to spray out, possibly spatter if the waste has become hardened in the tube, so make sure you're doing this somewhere that you can clean up easily.
6. With the waste tube aimed at the cup, hold down the "ink" button on the printer until the cleaning sequence starts. The sequence will take about 20 seconds and blow the tube out in spurts.
7. If stubborn, you can loosen the junk in the tube using some peroxide - it doesn't take more than a drop from the end of a q-tip to start eating away... give it a few seconds to work itself upwards into the tube. Massage the peroxide up the tube with your fingers for more effectiveness.
8. Run the cleaning cycle one or two times to make sure that there is either air or nice wet ink coming out, but no more solid waste.
9. Reassemble
10. Connect CX4600 back to your printer, and print a test pattern... perhaps one more cleaning... should be fine.

Also see this website:
http://www.fixyourownprinter.com/forums/inkjet/23861

Jan 09, 2009 | Epson Stylus CX4600 All-In-One InkJet...

1 Answer

Cyan will not print


Try replacing the cartridge. Sometimes they do get clogged and won't clear no matter how many cleaning cycles you run.
....John

Mar 07, 2008 | Epson Stylus Photo R1800 InkJet Printer

Not finding what you are looking for?
Epson Workforce Pro Wp-4540 All-in-one Printer W/inks brand New Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...