Question about Zanussi 24 in. DE6850 Free-standing Dishwasher

1 Answer

Where is the thermostat on a zanussi dishwasher

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Zanussi Master
  • 3,247 Answers

Thermostat should be in the base of the dishwasher next to the heater element and looks like this part.

http://www.espares.co.uk/product/es567728/dishwasher-temperature-sensor?PartTypeId=1532&ModelId=576996

Posted on Apr 19, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We are having problems with our zanussi da6141 dishwasher, it works on rinse hold, but when you set it to A it goes through the cycle upto point B, then gets so far round and keeps running, the knob stays...


If you examine the thermostat then you must check the pressure switch and timer. Could be: pressure switch stuck in a state of full (timer by level) or stuck contacts timer and timer motor is energaized and moves forward to the next cycle. You you can not exclude a mechanical failure of timer. There are so many reasons.

Dado

Aug 23, 2014 | Zanussi 24 in. DA6141 Built-in Dishwasher

1 Answer

I have Zanussi DX6453 dishwasher. Suddenly it is not drying our dishes. All programs working. Do you think is problem with Element or Thermostat. It is heating water.


sugget the water temperature, it relies on the temperature of the water to heat to items up so that when the wash cycle has finished the heat will dry them. Hope this is useful. Regards Mike

Jul 07, 2011 | Zanussi Dishwashers

1 Answer

WATER NOT HEATING IN MODEL DE 6850 Zanussi DISHWASHER


YOU NEED TO LOCATE THE THERMOSTAT AND CHECK IF ITS WORKING CORRECTLY IF THE READIND ON THE STAT IS FINE YOUR ELEMENT MIGHT BE FAULTH.BEST YOU GET A TECH TO ASSIST YOU AS ITS A TUFF JOB TO DO ALONE.

GOODLUCK.

MOHAMED

Sep 19, 2008 | Zanussi Dishwashers

1 Answer

Thermostat on zanussi zsf6150 dishwasher


its on the lower right hand side where the motor is there should be 2 wires going to it

Mar 25, 2008 | Dishwashers

1 Answer

Zanussi da4342 dishwasher


The dishwasher should heat the water to about 55 C as the heating cycle starts. In these cycle, the dishwasher pauses after has filled with water and wait for the water to reach the temperature. If the water isn't being heated (because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues.
Another possible reason is that the timer unit is defective. If you have observed anything different post a comment.

Jan 12, 2008 | Zanussi 18 in. DA4342 Free-standing...

4 Answers

Wont heat or dry


hi have you tried thermostat i repaired on last week same fault

Dec 20, 2007 | Zanussi 24 in. DE6850 Free-standing...

1 Answer

Problems! zanussi zsf6120


You can check the heating element with an ohmmeter and it should read a few hundred ohms. Don't know about the thermostat but it should be inline electrically with the heating element and should ohm as a short when cold.

Nov 23, 2007 | Zanussi 24 in. ZSF6120 Free-standing...

1 Answer

Zanussi DE540X


rather difficult to go further remotely. could be temp sensor. another place to look is at the module - have known quite frequently dry joints at the heater output. examine it carefully

Apr 05, 2007 | Zanussi 24 in. DA6153 Free-standing...

1 Answer

Water isn't heating up and not drying


Check with a multi-meter for voltage (220/115v) on heating element's tags. If you can read this voltage on tags - you should replace the heating element In case you can't read voltage on its tags, disconnect one of the wires from its tag (you should unplug first your machine's power cable!) and test for element's resistance - If you can read its resistance, you should replace the thermostat. In case of no resistance - you should replace element and thermostat Good luck!

Mar 12, 2007 | Zanussi 18 in. ZSF4123 Slim-Line...

Not finding what you are looking for?
Zanussi 24 in. DE6850 Free-standing Dishwasher Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

paulcarew

Level 3 Expert

2461 Answers

Owen Barnes

Level 3 Expert

867 Answers

Gerard Curran

Level 2 Expert

114 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...