Question about Zanussi TD4112W Electric Dryer

1 Answer

Zanussi td4112w drum stopped spinning

The machine makes the whirring noise like it's about to start and then the drum doesn't do anything.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 547 Answers

The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing Machine making a loud whirring noise when water is filling and when the machine is spinning out


Check the motor bearings If your washing machine is making a high-pitched whine or squealing noise while running, the main culprit is usually worn motor bearings. To check the motor bearings, remove the belt and run the motor by itself, listening for the noise. If it makes the noise, than the problem is most likely the result of worn motor bearings and has nothing to do with issues in the rest of the washer. Check for Obstructions Sometimes coins, bra underwires and other metal objects come loose in the wash and become stuck between the tub and the drum. Using a flashlight, take a good look inside the washing machine. If you see dents, scratches or dings, that's a sign that there either are or have been items bouncing around in there that can make a horrible racket. Check for Grease Spatter A high-pitched squealing can be caused when the grease thins around the bearing that's located under the tub. Open up the washing machine and check the interior for grease spatters or spots. That could mean that the grease has thinned out around the bearing and it's making the noise because of rubbing. Check the Drum for Irregularities Spin the drum by hand, listening for the noise. If it makes the noise in the same spot with each rotation, the problem could be with the washing machine drum itself. Parts of the drum can corrode over time, leaving it vulnerable to cracks or rust.

Aug 06, 2012 | Washing Machines

1 Answer

Very noisey and rattles


check the spindle on the rear of drum. its positioned in the centre of drum

Jan 31, 2012 | Zanussi TD4112W Electric Dryer

1 Answer

Zanussi TCE 7127 W, lights on, makes normal noise to start with, then no drum rotation, does this 3 times then buzzing (5 buzzes then a delay) starts, and 'end of programme' light comes on and stays...


5 beeps on the programme finished light means the motors knackered apparently, found that info elsewhere on the web. Done this to me today (and it's done it before as well, so i bought an extended warranty when the chance came fortunately). Time to get your guarantee or your wallet out i'm afraid.

Aug 19, 2010 | Zanussi TD4112W Electric Dryer

1 Answer

Td4112 which way does belt fit around drive and


check the drive it should have grooves on it. that means that the belt grooves should go around the drive and facing the drum. When you see the belt on the drum you should not see the grooves on the belt

Dec 31, 2009 | Zanussi TD4112W Electric Dryer

1 Answer

Reset button


your heating element may have burned out

Jun 17, 2009 | Zanussi TD4112W Electric Dryer

1 Answer

Zanussi zwf 1020w drum not revolving


The drum will not rotate until the draining process is satisfied, there is either something in the pump or pump is broken

Oct 20, 2008 | Zanussi FJD1666W Front Load Washer

1 Answer

Zanussi washing machine wont spin


check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Apr 23, 2008 | Zanussi ZWF1430W Front Load Washer

1 Answer

Noisy spin cycle


Hello your problem is the the drum.. To be more precise its the drum bearing.. theses wear out and can be replaced on the zanussi id suggest that you get an engineer out.. its about £100 to get it done

Dec 15, 2007 | Zanussi F1045W Front Load Washer

1 Answer

Whirring noise in spin cycle, 7 year old machine


Checking the pump woulb be the first step. The pump bearing get worn and begin to sqeal. If the pump is alright then the problem could be the spin bearing.

Oct 19, 2007 | Maytag Performa PAV2200

Not finding what you are looking for?
Zanussi TD4112W Electric Dryer Logo

Related Topics:

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Are you a Zanussi Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...