Question about Jack Lalanne Power Juicer (Stainless Steel)

Open Question

How to remove blade in mt 1000 - Jack Lalanne Power Juicer (Stainless Steel)

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you take the juicer apart for cleaning?


Undo the latch arms, remove the cover then the clutch nut in the center of the
blade. Everything should lift out.

Apr 03, 2011 | Omega 1000 Juice Extractor

1 Answer

Just received replacement Latch arm for Omega 1000. Old one is removed. Can not put the new one. Top part does not slide in. Also noted the old part and new part look different. Base is longer in the...


Believe it can be done. You might have to file or shave the new arm a little then seat it as best
as possible and tap it in place with a screw driver and hammer. If you do manage to attach
the new arm and the fit is a little too snug when you latch down the cover, file the upper tip
of the arm for a little more tolerance. Also, believe it or not, a worn blade will produce less
vibration. There is a set screw bottom center. With the juicer fully assembled, unlock it,
turn it clockwise until feed chute contacts the shredder blade and back it off a half turn.
You now have the proper gap between the chute and blade.

Jan 30, 2011 | Omega 1000 Juice Extractor

1 Answer

My Omega 1000 is 10 yrs old, but I've only been using it regularly for 1 yr and 3 months. Putting a carrot through isn't stabilizing it anymore. It takes off when the screen is 1/2 full. But the weirdest...


Yes the blade is hitting it when the juicer vibrates
severely. I have an Acme, 21 years old, and found
very difficult to control vibration especially with a
new shredder blade. If you are handy this is what
to do. Order a new cover from omega, cover design
has changed so you will need the plunger also. This
may sound incorrect, but you will have to use a small
file to file down the cutting burrs on the blade a fraction
of an inch. Then with the juicer fully assembled, unlock
the set screw on the center of the bottom and turn it
clockwise until the chute contacts the blade then back
it off a half turn. Now the chute to blade gap is set
correctly. In filing down the burrs you make the blade
a little duller but you also narrow the gap and feed
the produce through more slowly and evenly. This
comes from 21 years of using this machine. With
a new blade I could not control the vibration no matter
how I fed the thing. If this sounds a bit too much get
rid of the Omega and try the pulp ejecting type. The
Miracle MJ1000 is a nice little juicer for about $130.

Jan 29, 2011 | Omega 1000 Juice Extractor

1 Answer

When we juice, it turns and moves across the counter


Both the Omega and Acme juicers vibrate no matter what you do. I found a worn shredder
blade actually produces less vibration. However this involves filing the cutting burrs down
and resetting the blade to chute gap. If you're up to it, take the blade out and file each row
of burrs about halfway down. Then with the juicer fully assembled, unlock the set screw on
the center of the bottom, turn it clockwise until the chute contacts the blade, and back it off
a half turn. The set screw actually raises and lowers the motor spindle. Both companies
would not agree with this, but this solution comes from operating my 21 year old Acme.
I recently replaced the blade and the juicer immediately began tap dancing. Went back to
the old blade.

Jan 16, 2011 | Omega 1000 Juice Extractor

2 Answers

I don't know how to take it apart to clean it.


http://www.powerjuicer.com/customer-manuals.html

This is the site to download Manuals for all models of Jack Lalanne's Power Juicers. This includes trouble shooting guide, Instructions on cleaning ect...

Apr 08, 2009 | Jack Lalanne Power Juicer (Stainless...

1 Answer

Vibration


DIFFICULT TO USE. SHOULD HAVE GONE
FOR THE 4000 WHICH EJECTS THE PULP.
SOMETIMES THE BLADE JUMPS UP AND
CUTS THE BOTTOM OF THE CHUTE IN-
CREASING THE GAP BETWEEN THE BLADE
AND CHUTE BOTTOM. INSPECT AND I YOU
NEED A NEW COVER CALL OMEGA AT 717
561 1105.

Oct 01, 2008 | Omega 1000 Juice Extractor

Not finding what you are looking for?
Jack Lalanne Power Juicer (Stainless Steel) Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jack Lalanne Juicers Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Cindy Wells

Level 3 Expert

5099 Answers

dflynn2204

Level 1 Expert

5 Answers

Are you a Jack Lalanne Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...