Question about Epson Aculaser C1100 Printer

1 Answer

E511 error code

Has just been serviced, now this has come up and I cant clear it. Help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 145 Answers

  1. Check of Photoconductor Unit attachment. Re-attach Photoconductor Unit.
  2. Is the Drum of Photoconductor Unit rotating?
  3. Remove Photoconductor Unit. Turn gear of Photoconductor Unit until silver seal attached to Belt can be seen.Is silver seal dirty?
  4. Remove Photoconductor Unit. Is SENSOR TR-0 attached securely?
  5. Remove Photoconductor Unit. Are there any dirt or foreign bodies on the SENSOR TR-0 surface?
  6. Does the error recur when the power is turned ON?
  7. Remove Photoconductor Unit. The voltage of P416-2 ↔ P416-3 on PWBA MCU is 5 VDC when silver paper or other reflective object comes close to the sensing area of SENSOR TR-0, and is 0 VDC when the object is released?
  8. The voltage of P416-1 ↔ P416-3 on PWBA MCU is 5 VDC?
  9. Disconnect the P/J416 from PWBA MCU. Do all of the wiring below have normal continuity?
  10. Replace MOTOR ASSY P/R.

Posted on Jun 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error: service reg E511 what does this mean?


Part of the photoconductor unit known as the transfer belt is not being detected when the E511 Service Requested error comes up. Epson in the UK has the troubleshooting outlined here:

http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support;jsessionid=035E9EA2127A8A5A478481112D9F98B2.acc2?target=article&extn=.html&articleId=1319

Jun 19, 2010 | Epson Aculaser C1100 Printer

Tip

ServReq E511


to avoid the appearance of the error code Serveq E511 (Epson C1100) ; when using refilled cartridges, clean the inside of the printer with a vacuum cleaner

on Oct 22, 2010 | Office Equipment & Supplies

2 Answers

Espon aculaser c1100 service req e511


Error E511 is due to ur photoconductor.. the black transfer belt is out of position... it can be corrected if you know how to open up the photoconductor unit...

May 14, 2010 | Epson Aculaser C1100 Printer

1 Answer

Service Req E511


e511 is to do with the photoconductor unit which sits under the top lid

usually detector underneath the photoconductor dirty or the wide rubber belt then runs throuigh the photoconductor is sligthly off to one side

Feb 24, 2010 | Epson Aculaser C1100 Printer

1 Answer

I HAVE E511 PROBLEM ON THE C1100


The "Service Req E511" error message means that part of the photoconductor unit called the transfer belt is not being detected. Please see the following Epson article which may help. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

Jan 29, 2010 | Epson Aculaser C1100 Printer

1 Answer

I've a notice in epson aculaser 1100 lcd (service reg E511)


The E511 error for your Epson Aculaser  in most cases means that its motor has malfunctioned or something is preventing the motor from working properly.

Jan 26, 2009 | Epson Aculaser C1100 Printer

3 Answers

Epson Aculaser C1100 Printer suddenly stopped printing


Hi,

To my knowledge Error Code E511 refers to photoconductor and/or its associated components. It is possible that:
  • the photoconductor requires a bit of cleaning and to be reseated snugly;
  • the black rubber conveyor (transfer) belt inside the photoconductor moved away from its path;
  • the silver square reflector on the transfer belt needs cleaning;
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 18, 2008 | Epson Aculaser C1100 Printer

2 Answers

No functions are working, error code E511 shows in dialogue box


E511 is in regard to the photoconductor unit. There may be the need to clean the black belt from dust accumulation (other users have reported success by that) whilst I had success by cleaning the surface of the optical sensor on the left, accessible after lifting out the photoconductor. Keep the photoconductor shielded from light while you do this. It usually about stray toner accumulated on surfaces within the printer. Be careful how you remove "dust", a vacumn cleaner can catch fire because the dust is susceptible to electrostatic charge build up.
Hope this helps.

Jun 22, 2008 | Epson ACULASER CX11NF All-In-One Printer

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...