Question about Sony Playstation 3 (PS3) Console

4 Answers

Error 80010514 on Ps3

Will not load game, came up with the error 80010514

Posted by on

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 398 Answers

Error code 80010514 means the disk can not be read.

  • Check and clean the disc.
  • Attempt other discs
  • If the disc is scratched, you may need to replace the disc.
  • If most (or all) discs have this issue, your system may need to be sent in for service. Click here for service instructions.
How to Ship PS3 For Repairs Service

Posted on May 19, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 167 Answers

This error code indicates that the PlayStation 3 is struggling to load the disc, which could be an indication of an issue with your consoles Blu-ray drive.

Blu-ray drives can accumulate a lot of dirt and dust on delicate internal components. Over time, this buildup can affect the ability of the Blu-ray laser to read the video game discs when inserted in the machine.

Start by cleaning your console internally with compressed air. I also recommend getting a Blu-ray lens cleaning kit to aid in this process.

Make sure your game is free of scratches and fingerprints. A Disc Scratch Repair Kit, or Disc Cleaning Kit may also help. I use Windex
Glass Wipes to clean my discs, but rubbing alcohol is recommended because it dissolves fingerprints.

If you completely scratch the data off the disc, typically the label side, a repair kit will not help you recover that lost data; the disc will have to be replaced. You can also use furniture polish and a micro-fiber cloth to remove lite scratches from the disc surface.

In the past, I have used a mild toothpaste or Brasso to buff-out scratches on unreadable discs. Later, I invested in a Disc Buffing Machine and have been able to restore every disc so far. Now, I don't have to get stressed out when my kid scratches a disc; I can just repair it in minutes.

If cleaning does not resolve your issue the Blu-ray drive in the PlayStation may need to be replaced or serviced by a professional.

Posted on May 12, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

Hello David-

This is a normal failure on the PS3 unit, the error relates to a failed laser module. That said, the laser module will need to be replaced.

Feel free to give us a call with more questions.

dr GEEKsters
888.882.1908

Posted on May 08, 2014

  • NemisizZ May 08, 2014

    The error means it couldn't read the disk, which could indicate that either the disk or lens is dirty, try clean the lens first, no need to go spend money on a replacement unit if you only need to clean it.

  • drGEEKsters.com
    drGEEKsters.com May 08, 2014

    So in response to nemizes input, yes in about 10% of our repair situations the laser module would "simply" need to be cleaned, primarily in a smoking or high dust environment. So if you have you are one of the lucky few, then this would be an remedy for you. But having repaired over 2,000 PLAYSTATION 3 video game consoles, this is rarely the case. As the error code typically relates to an actual failure of the laser module itself. IF the lens was simply dirty as the last imput "suggested" then it would be and intermittently reading unit and the issues would not be constant. That said the remedy would be the response we originally provided.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 64 Answers

It could be 2 things.

1. You need to clean your lens.
2. Your lens is dead, and you would need to get it replaced.

Posted on May 08, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: PS3 ERROR 80010514

firmware 2.0?Is a bug.....or lens by throwing

Posted on Jun 22, 2008

RescueTechLA
  • 2653 Answers

SOURCE: PS3 "an error has occurred during the start operation" (80010514)

Sounds like a problem with your blu-ray drive.

Try playing a blu-ray movie and a dvd.

Let me know what happens and we'll go from there.

Posted on Feb 27, 2009

  • 7 Answers

SOURCE: My ps3 gives me two error: 80010514 and 8001002B, I tried it all.

go under settings then system settings then restore default settings

Posted on Jul 21, 2009

  • 393 Answers

SOURCE: Error messages 8001050F and 80010514 disc will not play

=-=- Here’s what’s going on right now: something with the PS3’s internal clock has borked in some pre-slim models. This is not a PSN issue; it has to do with your PS3’s clock. This clock is NOT related to the OS clock. It seems to be a leap year bug. Setting your clock ahead will do nothing. All PS3s around the world were affected at the exact same time.
Does this affect me?
-If you have a Slim PS3, you’re good to go. Continue playing it as normal.
-If you have a “fat” PS3, you may be affected. Some fat PS3s have worked ok, but it seems a good majority have been bugged.
What does this bug mean?
-If affected, your date and time has been set to a random past date. This prevents you from signing into PSN, playing any PSN games, or using any DLC. Your trophies will also not display correctly or be able to sync.
How do I fix it?
-You can’t. Even if you don’t sign into PSN, it won’t help. This is a hardware issue.
So, what do I do?
-Wait 24 hours. Other products that have had similar bugs have corrected themselves after the “bugged” day. On Monday around 6pm central time, all PS3s will automatically correct themselves…maybe.
-If that doesn’t work, we’ll need a firmware update from Sony, which should be a pretty important priority for them right now.
Did I lose my data/themes/etc?
Your save data/games/dlc/themes are fine. They’ll be fixed when the PS3 is fixed. Trophies are uncertain right now, but they’ll be fine if you’ve synced them before the PS3 was bugged. Unsynced trophies are an unknown right now.
If I have a bugged PS3, can I still use it?
It’s probably not a good idea, as I have no idea what will happen to the trophies you earn during the bugged time. Movies/media will work fine.

Posted on Mar 01, 2010

  • 85 Answers

SOURCE: Ps3 error code 80010514

This is alot of info but you wanted to know. :P hope it helps

Gamerevolver.com recently had an interesting article regarding the dreaded 80010514 error. I hope many of my loyal visitors never have to encounter it. Their is a known issue with the PS3, simply known as error 800010514 which doesn’t happen often but when it does, it’s darn right nasty.
The error in question is mainly seen within the first month of use, or to put it bluntly, it has the error right out of the box, however, we have seen this occur at almost a year into service as well.
“An error occurred during the start operation. 80010514′
Gamerevolver.com recently ran into the the dreaded 80010514 error shortly after installing a new game they had purchased off the PlayStation Store and decided to document it. Here is what the have to say…
Since this error occurred, we obviously contacted Sony Support. We were informed that the code is not common, and a simple reset of the system, and restoral of factory settings should do the trick. Unfortunately, after the restoral, the error still occurred.
The error code is actually one of two things, a) a faulty sector on the internal hard drive, or b) a faulty installation of software/firmware, both iterations actually coincide with eachother. If the hard drive suffers a faulty sector ( a section of damaged space on the drive that data may have been written to that no longer is readable), an installation may still be processed, and even work, but the error can cause some serious side effects, such as option b. If your PS3 has installed an item incorrectly, including firmware, it is in high risk of receiving this error.
Basically, what is occuring is the corruption of game disc recognition and execution. If you will notice, in 90% of all cases, the drive will still play DVD and even Blu Ray movies with no problems. When trying to start a game however, the title, sooner or later, will receive the error.
1) Ensure that your internet connection is stable. If you are using a wireless connection, make sure your signal is at least a solid 80%. If not, make the proper adjustments until it is.
2) Dust your machine regularly. Any PS3 owner will tell you that the Playstation 3 is a dust magnet. Just run a dry cloth over it every couple days, and you should be fine. This will help prevent heat issues and shorts that may occur.
3) When installing firmware and/or software, make sure you follow the instructions. Even if you have installed 6 versions prior, each one is different, and may require additional steps. Save yourself the headache and just follow them, it only takes a minute or so longer to do it right.
Lets sum it all up, the error is not hardware related and is caused due to corruption of firmware. Restoring you PS3 will not roll back the firmware, and unfortunately will not fix the issue 9 times out of 10. If you are receiving this error, contact Sony for a replacement unit. Again I hope none of my readers have to see the dreaded 80010514 error and by following Gamerevolver.com’s simple steps your bound to prolongue the life of your PS3 indefinitely.
(Update) Eurogamer.net contacted a SCE UK spokesperson which told them “”I’ve spoken to our Customer Services department and they aren’t aware of this issue with the PS3.” So take that as you will? Is the dreaded 80010514 just a myth? or an error that Sony is not aware of?
(Update 2) Try this before replacing Blu Ray drive (Last Resort)
Undertakerza updated a game, Warhawk and his system froze, got it rebooted it could no longer access any discs (cd, dvd, blu ray, games) he was ejecting and re inserting disks when I realized that the drive wasn’t making any noise and also … not spinning disks anymore they come out the exact same way he put them in.
Here is how he did it:
Ok so I’ve fixed my issue. I will run through what you will need to do to fix yours if you are having issues with the blu-ray drive and general PS3 system operations like the XMediaBar this is totally worth a shot … I doubt this will fix any other issue. If not then your blu-ray drive/ PS3 is probably dead and needs replacement via the method listed above or by sony.
If you can, I suggest you back up your PS3 first. The menu that you will access to can fully erase your PS3 if you choose the wrong option! I do not take any responsibility! Please proceed at your own risk! If you read and follow the instructions exactly you should not loose any data! Feel free to ask questions if you are confused so you don’t make a mistake!! Sorry, I had to say it, I don’t want anyone mad at me if they make a mistake, don’t back up their data and erase it, and then blame me…
The current version of the ps3 firmware has a “recovery console”.
You access it by
1. Start with having the system in standby (redlight is on)
2. Hold the power button down; the system will turn on and turn off once again.
3. Press and hold the power button again and keep holding, it will beep as it turns on and then it will double beep. When you hear the double beeps immediately take your finger off the power button (if your system turns off before you get a double beep just try again and hold the button, it should double beep the 2nd time you try)
4. You will be prompted to plug in your controller via USB and then hit the PS button
You will now have a screen with these options (I have attached a picture of this screen below)
1. Restart System: Restarts the PLAYSTATION®3 System.
2. Restore Default Settings: Reset all system settings back to default.
CHOOSE THIS ONE 3.Restore File System: Checks for corrupt/missing system files.
4. Rebuild Database: Rebuilds the OS for the PLAYSTATION®3.
5. Restore PS3 System: Fresh restore; Deletes everything and starts from Scratch.
6. System Update: Update the PLAYSTATION®3 System
IT IS VERY IMPORTANT THAT YOU DO NOT CHOOSE THE WRONG OPTION HERE OR YOU WILL LOSE ALL YOUR DATA. The one that fixed my blu-ray drive is option 3: RESTORE FILE SYSTEM
I REPEAT CHOOSE RESTORE FILE SYSTEM
After this, it is going to restart and bring up a screen reading something like “you have Corrupted System Data. Your PS will now replace this data” Then you choose continue and that should be it.
This option reinstalls the system files and drivers inside the PS3 with the original ones that are stored on your hard drive. In this case, it replaced a corrupted driver for the blu ray drive thus fixing my issue and hopefully yours!! This option will only replace all system files thus saving you from loosing any data that’s stored on your hard drive. Again this option does nothing to your hard drive it reads a file from the drive and rewrites it to the PS3 system.
If you want a more technical understanding of what this is really doing continue reading. DO NOT NEED TO READ THIS TO COMPLETE REPAIR. The PS3 does not boot from your hard drive as a computer does. It has a flash memory like a cell phone that stores all system files and system firmware updates that you get when the PS3 updates. This is why reformatting your hard drive will not fix your problem, none of the system files are stored on your hard drive (ex. XMB, system firmware, etc.) nor do they run from the drive.
However, your hard drive does contain a full backup of your SYSTEM files and thus when you choose option 3: RESTORE FILE SYSTEM it rewrites the original system files from your drive (which aren’t corrupted) back to the flash memory which is corrupted thus fixing the problem
UPDATE: With the new firmware 3.10 you may be able to report the error code directly to Sony via your PS3 console. Have a look here, please note that this has not been tested for this error code yet.

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

80010514


Go to this link as it has nice info on how to repair the problem. Its too much to list here. :)
http://www.ps3errorcodesfix.com/ps3-error-code-80010514

Sep 15, 2012 | Sony Playstation 3 (PS3) Console

1 Answer

Error cod 80010514 ps3


the PS3 error code 80010514 is related to an error with the Blu-Ray disk drive inside your PS3 console

Nov 03, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

FIFA 11 game wont start (PS3) gives me error code 80010514. All other games work fine. Game works fine in brothers PS3. Never had this problem before. PS3 support says they have had a lot of calls with...


It's eiyther one of two problems:

The first is that FIFA 11 is screwed up due to an EA Sports programming glitch within the game - (see http://www.community.eu.playstation.com/t5/Technical-Help/FIFA-11-Error-80010514/m-p/11614173))

OR

The second is that your PS3 is dying and the laser won't read discs. Which gets progressively worse, or so i've read. - (see http://www.ps3blog.co.za/2008/04/10/ps3-error-80010514-explained/)

I'm getting the same error but my PS3 isn't yet 12 months old, so is going back to the store.

P*ssed that I can't play the new FIFA though!!!!

Oct 02, 2010 | Video Game Consoles & Games

1 Answer

Error code 80010524 and it only loads ps2 games


Hello Sir

80010514 - An error occured during the start operation; Ps1 game swapped using
the eject function and then play pressed quickly - ps1 game inserted
again

Dec 13, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Error code 80010514 displays when i try to load ps3 games or they just dont load at all , ps2 games are fine


Hello Sir

80010514 - An error occured during the start operation; Ps1 game swapped using
the eject function and then play pressed quickly - ps1 game inserted
again

Oct 13, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

I have error code 80010514 and games wont load


Hi , I'm Glad To Help You Sir

80010514 - Disc error detected. Retrying operation

Oct 11, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

ERROR CODE 80010514


go to this link and it will explain your error code and how to fix it.
http://www.ps3blog.co.za/2008/04/10/ps3-error-80010514-explained/

Aug 04, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Error code 80010514


Unfortunately, from what I have read, it looks like you should call Sony. This is a hardware failure code and has nothing to do with firmware. Hopefully the system is still under warranty.

Jun 25, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

Motorstorm 80010514 erro


your error means this according to what I could find out : 80010514 - Disc error detected. Retrying operation. Do your other games work. If so, then you may have a bad game disc. Or it may be scratched or dirty. If your other discs work, then I would try this game on someone elses unit, or check it for dirt/fingerprints. If that doesnt work, you could try a cd lens cleaner disc..it may help.

Jan 04, 2008 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

shaun taylor

Level 3 Expert

1525 Answers

marley mcelhinney

Level 3 Expert

490 Answers

juanmireles1

Level 2 Expert

216 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...