Question about Canon PIXMA MG5320 All-in-One Printer
Error code B2100 appears
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Just restart the system and turn off the printer and turn on the printer it will work.
Check did you correctly placed your cartidges.
Posted on Mar 03, 2008
SOURCE: CANON PIXMA iP3300
1. turn off printer
2. Hold down resume, dont realase and press power button
3. realase resume button, now press twice resume button but dont realase power button
4. realase all.
5.now press twice again resume button and plug off power cable
6. turn on printer with plugin power cable
7. your printer will reset.
iff not working, you must chek pointing contact in head printer, use some claener with cottonbuds to clear the contact.
may you sukses!!!
Posted on Dec 19, 2008
SOURCE: does not print error b200
Helo, found on web. Good Luck :0)
The error code is standard for many of the late model MPxxx printers. The B200 error is "Printhead Temperature exceeded", What this means that while you were printing some document, either one or more of the printhead ink wells ran out of ink and the printing continued. Printhing without ink in the wells will OVERHEAT THE PRINTHEAD NOZZLES and can potentially burn the out. The printer has a built in temperature sensor to detect the ambient temperature and to monitor the temperature of the head. This data is always collected and monitored and saved in the EEprom data and the Service Test print data.
If the error will not go away once you have unplugged the priner for at least 5 minutes, then there is the possibility that you have already burnt out the head. Remove the printhead and use a 5x magnification glass to look VERY CLOSE at all of the nozzles to see if you can detect any possible burnt out nozzle.
It many come down to need a new printhead.
HERE IS THE LINK, IF YOU HAVE PROBLEMS.
Posted on Nov 07, 2009
SOURCE: Error Code B200
Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.
Posted on Aug 02, 2010
SOURCE: Canon Printer Pixma MP540 with
Try to press down on the sponge to get it to work again. It may be a waste toner issue, which generally is repaired at an authorized service center for canon by contacting 1-800-OK CANON or logging on to canonusa.com.
Good luck on this.
Posted on Feb 12, 2011
Tips for a great answer:
Dec 13, 2013 | Office Equipment & Supplies
Jun 23, 2013 | Canon PIXMA MX860 All-In-One InkJet...
Feb 12, 2011 | Canon PIXMA MP540 All-In-One InkJet...
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: