Question about Lexmark E250d Laser Printer

Open Question

E350 printer, new fuser installed. Lights flash twice and machine shuts down

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 217 Answers

SOURCE: lexmark e250dn printer, toner light is flashing, new cartridge

Could be photoconductor at end of life.

You shoul still be able to do a printer test print (press the arrow button).

Look on the printed pagesfor Toner AND Photoconductor.

These show as OK when new or very low count, and 100% when fully used.

If the toner is showing as 100% when you've just replaced it, either the chip is faulty, the wrong one, or if the cartridge is a remanufactured one possibly nor been replaced.

Posted on Mar 30, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New Fuser is not being recognized by machine . . .


There are no mechanical sensors to detect that the fuser is installed, only the connector on the fuser that plugs into the main board.The fusers in this model are not the most reliable, I would try another fuser if you have it.

Dec 17, 2015 | HP lj ent 600 m602n 52ppm ntwk mono...

1 Answer

C 3201 bizhub c351


did you reset the machine after installing the different fuser a different fuser does not reset the machine requires a manual reset procedure your old one might be ok just got to hot and shut down reset the machine.

Apr 01, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error p1500


The printers first error code show all lights flashing:
Flashing Ready'Data
Flashing Toner Low
Flashing Load'Remove Paper
Flashing Paper Jam
Flashing Error
Flashing Press Continue
By pressing continue twice to get to second error codes the lights show:
Flashing Ready'Data
Off Toner Low
Flashing Load'Remove Paper
Flashing Paper Jam
Flashing Error
Flashing Press Continue
Pressing continue twice more shows:
Off Ready'Data
Flashing Toner Low
Off Load'Remove Paper
Off Paper Jam
Off Error
Off Press Continue
Pressing continue twice more brings back to all lights flashing
The computers ( I have tired more than one with diff USB and A parallel cables) do not see the printer as being attached. My toner is half full. I checked the internal power board in base of printer and the fuse is good. The error should not have anything to do with being connected to a computer or not because when it was working and not connect to a computer it would not blink all the indicator lights (If I remember correctly, just the Press Continue light would be lite).
Information I have found so far:
  1. http://support.dell.com/support/edocs/systems/p1500/en/index.htm#online_documentation
o Under PDF Documents Owner's Manual(English) (.pdf) (1.33 MB) shows very little about the indicator lights.
o Under HTML Documents User's Guide shows more information about the indicator lights but mentions nothing about the secondary error codes.
  1. The Lexmark E321/E323/E220 are very close cousins to the P1500 and on Lexmark's website the manuals have more info on secondary codes but nothing that matches my error.
Information I am guessing could be the problem:
  1. The fuser has gone out (need to know how to check) Why else would they sell the fuser if it didn't go out regularly Part Number: 56P1053
  2. Clutch Assembly I'm not sure of the accuracy of the info on this page.

Mar 12, 2014 | Canon Office Equipment & Supplies

1 Answer

Printer message error H2.


Fuser problem, Check to make sure fuser installed and connected. Use Sim 14 to reset. Hold the light expouser key until all lights flash and - - shows on display then enter 14 and press the copy button. Machine should restart.

Aug 30, 2010 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Koyceracopier km 1635, has error c-6


Dont waste your money on replacing the fuser, just switch on the machine and enter its maintenance mode which is 1087 (dial 1087 twice) then you hit 163 and your machine will shut down and restart itself then you are Ready to Copy

Jul 06, 2010 | Kyocera Office Equipment & Supplies

1 Answer

Need to clear the error code "replace Fuser" Fuser is new and so is the paper tray cannot seem to get the darned thing to clear


Put the MFC into Maintenance Mode
Press the Menu and Start Keys at the same time then press the up arrow key 4 times the machine should display "Maintenance " in the LCD display
Press the 8 key twice, Display should show Part Replacement
Press up or down keys to select "Reset Fuser" press OK or Start Key to reset the counter of the fuser
To Exit Maintenance Mode press the 9 Key twice
I hope this helps.

Aug 20, 2009 | Brother MFC-8460N All-In-One Printer

2 Answers

Toner light flashing in printer 330


please you chack your printer fuser unite thermostater is over toner dust clean it i wish you are success

Jul 20, 2009 | Lexmark E330 Laser Printer

1 Answer

DELL Laser printer 1700/1700n


All flashing lights for the Dell 1700 series (1700, 1710, 1720 including those that have n or dn as part of the model) printers is a service related error. When double pressing the continue button twice quickly, the printer will give a secondary error code, narrowing down the printer part being effected. It is possible to even narrow the error code down even futher by double pressing the continue button and taking note of which combination of lights come on, wether they are steady or blinking. Most generally when this series of printers, when you get all flashing lights, something major is going on with the printer. It could be pointing to the fuser, or main board, etc. You can call dell warranty support and they will help narrow down which part is being effected. Most generally, what is being effected is not cost effective to get fixed if you are no longer under warranty.

Sep 18, 2008 | Dell 1700n Laser Printer

1 Answer

I have the above printer


Most likely the fuser unit isn't warming up try shut down and restart of the printer but normally replacement fuser required.

Thanks J

Jan 09, 2008 | Brother HL-2040 Laser Printer

2 Answers

Brother 7020 Fuser does not warm up


dcp-7020 fail to warm - how do i reset if i turned off and on already and waited 10 minutes

Dec 14, 2007 | Brother DCP-7020 All-In-One Laser Printer

Not finding what you are looking for?
Lexmark E250d Laser Printer Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...