Question about Hampton Bay 52 In. White Redington IIIÂ¿ Ceiling Fan w/ Remote Control & Light Kit
Fan runs slow
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
in your ceiling box should be three wires. a red goes to the three way switches, a black goes to the hot and the white is the neutral. the fan wires are black, blue and white. since you have a remote, connect the [fan] blue & black together with the [line] black. connect all white wires together. the remote will now ramp up your lights from off to full on and the fan remote will let you choose lo med high and off. just tape up the red wire in the box.
Posted on Aug 22, 2007
I recently replaced my hampton bay fan for the same reason (slow at all speeds) and discovered scorched and melted capacitors and wiring inside the fan. My suggestion is to stop using fan and replace immediately.
Posted on May 11, 2008
I had the exact same problem. To solve it, I had a friend hold the area
of the fan that the globe screws into. I wore rubber dish gloves to get
a good grip and pushed up slightly on the globe as I turned
counter-clockwise. My friend held the other part and turned clockwise a
little as well. It took a lot of pressure for it to finally come loose
and then we just turned it about another 90 degrees and the globe slips
right out of the groove.
I couldn't believe how hard this was to do.
Posted on Feb 14, 2009
go to Home Depot, not only do they have replacements, but they can order for you what you need. Hampton Bay is the Home Depot brand.
Posted on Mar 31, 2009
hi there i can help. There is a "dip switch" on nearly all fan remote units, much like a garage door opener has. To keep all the fans in your home from operating at one time, each fan needs a seperate "code". To use your other remote, you need to locate the receiver unit in the fan, usually in the "canopy". This is the bowl looking piece against the ceiling. then note the "code" which is the position of the switches. For instance, most have a block with 4 switches, and if the first is "on", and the remaining are "off", that is it's set code. This "code" can be changed to any combination of "on , off" that you like. BUT, you must also open the remote control and set it's switch to the exact same "Code", or order of "on off" as your Fan receiver. (Usually the control "Dip switch" is in the battery compartment.
Posted on Jun 20, 2009
Tips for a great answer:
Jun 06, 2017 | Hampton Bay Dryers
Nov 21, 2016 | Hampton Bay Dryers
Oct 05, 2016 | Hampton Bay Dryers
Sep 14, 2011 | Hampton Bay 24002 Ceiling Fan
Jun 05, 2011 | Hampton Bay YG092-VPW 52'' Preston Vintage...
Sep 20, 2009 | Hampton Bay AC414-LRU 52'' Kemper...
Jan 03, 2009 | Hampton Bay 24750 Huntington III Ceiling...
Nov 25, 2008 | Hampton Bay 24750 Huntington III Ceiling...
Aug 10, 2007 | Hampton Bay 52 In. White Redington...
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: