Question about Kenmore HE2 Plus Front Load Washer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
LID code could mean that the door lid switch is not pressed. try to shut the door completely or the lid switch could have been broken. or the plastic that should press the lid switch could have been broken also. it is attached to the door i hope i was able to help.
Posted on Jun 21, 2008
hi..the reason to this problem is probably due to the
motor control board.
check this out..
kindly rate my response..
Posted on Jul 20, 2009
The reason for your washing machine not to spin would be of a faulty motor coupling.
If the washer will fill and drain, but won't agitate or spin, you may have a broken motor coupling. The noise of the motor engaging, lack of agitation and ability to still drain are the usual symptoms. This is a common fail item with this model washer through normal wear and tear. Newer versions of the coupler are more resilient and resist breaking
The motor coupling is located between the drive motor and the transmission and takes the place of a drive belt. They do wear out and can break. The replacement part number is included in the link I provided and is an improved upgraded coupling that is more resilient. It should last longer. If you have questions, or require additional assistance, please let me know. I hope this helps you.
A replacement coupler can be purchased on line at appliancepartspros.com for about $11. Just use the part number in the link and "Search by Part Number" for your search criteria.
Thank you for contacting Fixya.com
Posted on Aug 11, 2009
If the bottom agitates and not the top, the problem is likely the 4 "agitator dogs" designed to allow the top agitator to turn only one way.
First, see the Sears parts site for your washer:
Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.
Also see the Whirlpool / Kenmore Service Manual for top load, direct drive washers.
It has troubleshooting and testing procedures
And see the following for how to gain access to the console.
I'd also test it on a different cycle to verify that the problem is with the timer.
Posted on Apr 10, 2010
Tips for a great answer:
Nov 05, 2010 | Frigidaire ATF6000ES Front Load Washer
Apr 24, 2010 | Washing Machines
Nov 08, 2009 | Washing Machines
Sep 11, 2009 | Bosch Classixx WFL 2066 Front Load Washer
Jul 20, 2009 | Kenmore Washing Machines
Mar 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...
Dec 11, 2008 | Kenmore 24902 Top Load Washer
Mar 04, 2008 | Washing Machines
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: