Question about Home
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you are looking for a manual for this car, try this link... http://cgi.ebay.ph/Ford-Falcon-Ute-BA-series-Repair-Manual-2002-2005-on-CD_W0QQitemZ170423275380QQcmdZViewItemQQptZAU_Clothing_Merchandise_Media?hash=item27ae04cf74 For twenty bucks you can do it all yourself
Posted on Feb 05, 2010
You may want to reference the Ford Australian Forum Boards.
There has been active discussion on owners being compensated
for particular model years due to a fault with the Shockwave paint.
On a separate note, the auto industry uses our technology for paint durability measurements (film thickness).
We have issued two press releases and have contacted Ford Senior Management on the impact of outsourcing paint applications process and quality control to the Paint Suppliers.
Press Release 1
New Books Reveal Vehicle Paint Quality Flaws Associated with Outsourcing
Press Release 2
Billions Discovered for Recovery by Automakers
We have released two books -
Basic Guide - For the Consumer
Technical Guide - For The Automaker and Auto Dealer
"MAKING IT RIGHT'
Why your Car Payments
are lasting longer than your
FACTORY PAINT JOB
We do have research data on various automakers vehicle models from the factory which shows they were released to the automaker, auto dealer and consumer below Ford's paint thickness specifications.
Low film thickness results in paint peeling, stone chipping and body rusting.
Paint applied too thick will crack.
We are advocating a "Truth in Finish Disclosure" to protect automakers, auto dealers and consumers.
You may want to advise your auto dealer on the book and do a search inside the book on either Amazon or our website for additional information.
Posted on Mar 13, 2010
SOURCE: ba falcon heater
Just had the same thing happen to my BA. No hot air. I'm a bit of a handyman so I had a go myself. 8 Hours is a reasonable estimate. You have to remove the steering column and entire dashboard to get the bugger out. Not a job I would attempt again.
Posted on May 01, 2010
there should be two skrews in backe of steering wheel may be dificuklt to see there may to plastic covers over the screws as well or may be four screws
Posted on Mar 02, 2012
next time it wont start, pour hot water over ecu, if it starts replace ecu, you will need a scanner to reset as it will go into theft mode when you fit new ecu, beware that this is a common fault and you can buy 2nd hand faulty computers.
Posted on Jul 23, 2012
Tips for a great answer:
Mar 11, 2016 | Cars & Trucks
Jan 27, 2016 | 2005 Ford Falcon 4.0
Aug 11, 2014 | 2005 Ford Falcon
May 04, 2014 | 2005 Ford Falcon
Mar 02, 2012 | 2005 Ford Falcon 4.0
Mar 01, 2012 | 2005 Ford Falcon 4.0
Feb 05, 2010 | 1999 Ford Taurus
Sep 23, 2017 | Duravit Home
22 people viewed this question
Usually answered in minutes!