Question about eMachines W3619 PC Desktop

1 Answer

Problem upgrading CPU

I've been trying to install an Intel core 2 duo e6700 on my eMachines W3619, when I try to start, everything but the power light turns on and nothing comes up on my monitor. When I put in my old processor, everything works fine I have the latest BIOS installed and flashed. Also, with the update my fans have been running at full speed and I cant find a solution. My motherboard is an ecs 945gct-m3

Posted by on

  • Ulises Ortiz
    Ulises Ortiz Apr 20, 2014

    UPDATE: BIOS is now updated, problem is still occurring and now my fans are running even louder than last time.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • eMachines Master
  • 496 Answers

Try to update the BIOS with the old CPU in, if not the new CPU could be faulty, yes I know it's new but it is entirely possible

Posted on Apr 19, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 916 Answers

SOURCE: EMACHINE T6534 COMP. WANT BOOT . TRYING TO CHANGE V-CARDS

This could be a few things though if you have already checked the memory and HD. The next thing I would tell you is that you should check the cpu. Also make sure that everything in the BIOS is set to the default settings when you start it.

Posted on Feb 04, 2009

kvalley_9406
  • 1 Answer

SOURCE: I updated BIOs and now every thing is gone.

Okay, sounds like your BIOS upgrade went south. First off, re-install the original BIOS. Usually you back up the original before upgrading. Either that, or d/l the original BIOS from emachines.com. Once you've got the BIOS working, try starting the system. I'll need to know more to help you from there.

Posted on Feb 21, 2009

ssebata paul
  • 159 Answers

SOURCE: emachines won't turn on

remove the processor,ram for 30min and put them back

Posted on May 30, 2009

info2u
  • 596 Answers

SOURCE: Nothing on my Emachines computer will turn on.

I would recommend rechecking your connection to the motherboard. All wires from the power supply to board and making sure the front panel switch connection are correct. Also, make sure the power supply is compatible to the motherboare. even though a 20-Pin ps will connect to a 24-Pin board, it still does not work. Good Luck

Franklin
C2Solutions

Posted on Aug 02, 2009

markzbylut
  • 64 Answers

SOURCE: Emachine w3507 blue light only

If you get nothing but a blue light and no video at all it sounds like you have a bad power supply. They are easy enough to check and replace but not for a first timer. If you know someone who knows more; get a volt meter and put it on the DC scale. Unplug a power plug to a drive or find one that is not used. Measure the Yellow to black and then the red to black wires. You should get 12 & 5 volts respectively.

Posted on Apr 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intel E6750 compatible?


Motherboard supports the following processor upgrades:
  • Intel Core 2 Quad (Y) Q9xxxx
  • Intel Core 2 Duo (W) E8xxx
  • Intel Core 2 Quad (K) up to Q6600
  • Core 2 Duo E6x00 (C) up to E6700
  • Core 2 Duo E4x00 (C) up to E4400

May 13, 2014 | HP Pavilion a6838f Desktop PC

1 Answer

I want driver e6700


The operating system is the "driver" for a CPU

May 12, 2014 | Intel Core 2 Duo E6700, 2.66 GHz E6700...

1 Answer

Cpu upgrade


Hi Keith... here is all I could find on this machine, I assume this is how yours is set up. Component details are almost impossible to get on E-machine units, they just do not provide them.
  • Processor Intel Celeron D 356 / 3.33 GHz
  • Memory 512.0 MB / 2.0 GB (max)
  • Hard Drive 120.0 GB - 7200.0 rpm
  • Operating System Microsoft Windows Vista
First, you want to check to see if your proc even can be changed; many of E-machine procs are permanently attached to the motherboard and cannot be removed; this is the cheapest way to manufacture a computer, and E-machines is bottom of the line quality computer (no insult intended, just fact). Since I don't know what CPU socket the T3604 has I can't tell you if the Intel CPU would fit it. Next, I don't know what the Northbridge is running at; if it is less than 1066 there will be a bottleneck and there is no significant gain. At this point, I suggest that you not spend a lot of money on this, better to save and build your own computer. If you are a hardcore gamer looking for high framerates you really don't want this machine. Better to load in more RAM if you have no other options. Here is something I ran across:
http://www.overclock.net/t/763634/what-to-upgrade-emachines-t3604
If I had the above details I could give you an answer.

Mar 21, 2014 | E-Machines T Computers & Internet

1 Answer

I'm planning to upgrade my desktop and i want to start upgrading from cpu. My current motherboard is Asus P5S-MX SE and cpu is Intel Pentium Dual Core Processor E2160, 1.8Ghz. Can you give me a list of...


Oh boy, you're in the same boat i'm in with my dad's HP asus based OEM board. You're max choice in a regular core 2 duo is the E6700 @ 2.66ghz with a 1066 FSB (Front side bus). Reason being is likely identical to my situation. The board likely only supports a "conroe" core. It can't handle the "WOLFDALE", otherwise they would list higher ghz for an E6700. The E6700 is also available as a 3.2ghz with 1066mhz FSB, but its based on 45nm process, which requires different power regulation from the board. if you were to put in the wrong chip, you get nada. Not even POST errors from what i've read where others have tried and failed.
Unfortunately, E6700 @ 2.66ghz are a little rare, but they are on ebay for about 80-100 bucks, and various other places. Search for "E6700", but be careful to avoid the 3.2ghz's.
The only other choice for max is the Core 2 Extreme X6800 @ 2.93 ghz. This processor looks like its about double the cost to the E6700 though. That's a lot of extra money to get only .27 gain in ghz though, IMO, though there could be other reasons to go extreme, like availability. There might be more of them! The same logic applies here. Stay with the 65nm process, and 1066 FSB.

Here is the tech spec page for your board. Its shows all the supported processors: http://usa.asus.com/product.aspx?P_ID=fLSzpcTDJYT0rgS6&content=specifications
You might want to choose carefully on whether to upgrade this board's CPU. Might be time to scrap the whole board and get something with more FSB capabilities.
Good luck!

Dec 29, 2010 | ASUS motherboard P5S-MX SE LGA775 SiS671FX...

1 Answer

What is the fastest cpu chip you can put in the mother board


Your motherboard supports the following processor upgrades:
  • Intel Core 2 Quad (Y) Q9xxxx
  • Intel Core 2 Duo (W) E8xxx
  • Intel Core 2 Quad (K) up to Q6600
  • Core 2 Duo E6x00 (C) up to E6700
  • Core 2 Duo E4x00 (C) up to E4400

Oct 08, 2010 | HEWLETT-PACKARD 461068001 Motherboard

1 Answer

Can i use nvidia 8600 video card for my mother board asus p5pe-vm and processor intel core 2 duo to my motherboard


this are the CPU -s that you're mb can support (core 2 duo)the numbers after "All" are the bios version's you need for the cpu: Core 2 Duo E4300 (1.8GHz,800FSB,L2:2MB,65W,rev.L2) ALL 1201 Core 2 Duo E4400 (2.0GHz,800FSB,L2:2MB,65W,rev.L2) ALL 1202 Core 2 Duo E4500 (2.2GHz,800FSB,L2:2MB,65W,rev.M0) ALL 1406 Core 2 Duo E4600 (2.4GHz,800FSB,L2:2MB,65W,rev.M0) ALL 1406 Core 2 Duo E4700 (2.6GHz,800FSB,L2:2MB,revG0) ALL 1501 Core 2 Duo E6300 (1.86GHz,1066FSB,L2:2MB,rev.B2) ALL 0604 Core 2 Duo E6300 (1.86GHz,1066FSB,L2:2MB,rev.L2) ALL 1201 Core 2 Duo E6320 (1.86GHz,1066FSB,B2:4MB,rev.B2) ALL 1402 Core 2 Duo E6400 (2.13GHz,1066FSB,L2:2MB,rev.B2) ALL 0604 Core 2 Duo E6400 (2.13GHz,1066FSB,L2:2MB,rev.L2) ALL 1201 Core 2 Duo E6420 (2.13GHz,1066FSB,L2:4MB,rev.B2) ALL 1402 Core 2 Duo E6600 (2.40GHz,1066FSB,L2:4MB,rev.B2) ALL 0604 Core 2 Duo E6700 (2.66GHz,1066FSB,L2:4MB,rev.B2) ALL 0604 Core 2 Extreme X6800(2.93GHz,1066FSB,L2:4MB,revB2) ALL 0604 and for the graphic card ...no because you motherboard has the "AGP" interface and the nvidia 8600 has "PCI - express" interface as is described here: http://www.nvidia.com/object/geforce_8600_8500_tech_specs.html

Jun 14, 2009 | ASUS P5PE-VM Motherboard

1 Answer

Like to upgrade I have DG 965 RY LGA 775 Socket


Hi, your motherboard supports several different kinds of processors. You have a choice of two for the fastest performance. You could go with an Intel Core 2 Duo Processor #E6700 that runs at 2.66 Ghz with a front side bus of 1066 Mhz and 4 Mb L2 cache, or you could go with an Intel Single Core Processor #670 that runs at 3.80 Ghz with an 800 Mhz front side bus and 2Mb L2 cache. The Core 2 would outperform the Single Core, but it is more expensive. Hope this helps! Hal

Jun 03, 2009 | Intel DG965RY Motherboard

1 Answer

1333 FSB processor ( E6850 ) on a 1066 FSB motherboard, DDR2 667 memory


Hi proenza. you're making good sence! You're D945GCL MB should be able to run 1066 FSB. Not 100% sure you're memory will keep FSB up to 1066.
Here's the trouble though. The Intel Core 2 Duo E6850 will not run on the Intel D945GCL motherboard because it is not supported. Look here at Intel's web site. Supported CPU's.
http://processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=d945gcl

Intel E6850 specs sheet. http://www.dealtime.com/xPF-Intel-Intel-Core-2-Duo-E6850-Processor-3-0GHz-4MB-Cache-1333MHz-FSB-Conroe-Dual-Core-OEM-Socket-77

Intel E6700 spec sheet. http://www.dealtime.com/xPF-Intel-Core-2-Duo-E6700-2-67Ghz

This CPU is supported by the D945GCL MB.
http://processormatch.intel.com/CompDB/SearchResult.aspx?Boardname=d945gcl

Intel Core 2 Duo E4700 Processor BX80557E4700 - 2.60GHz.
$149.99
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3826343&CatId=2396

In order to get 1066MHz (CPU can run at), you'll also need the memory support at 800MHz. The D945GCL MB can only run DDR2-667MHz.
Many people buy a CPU to run MB's specs (1333MHz) just to find the same MB does not support DDR2-1066MHz or DDR2-800MHz. Motherboard Mfg's are lagging. DDR3-1333MHz is out there now to support the 1333 MHz CPU FSB.
http://www.lagoom.com/KINGSTON_1G_DDR3_1333MHZ_PC3-10667/KVR1333D3N9_1G/partinfo-id-580235.html

I hope this has helped you make a decision proenza.

Good Luck!

Mike

Jul 17, 2008 | EliteGroup ECS 945GCT-M/1333 Motherboard -...

2 Answers

Asrock p4i65g motherboard


Your current motherboard is an mATX form factor. I recommend staying with that form factor for your new motherboard if staying with your current case. When upgrading to the new board you choose don't forget that you may need to upgrade the power supply unit also. You should upgrade to either a socket AM2+ board with dual core amd cpu or socket 775 board with Intel Duo Core2 cpu.

May 02, 2008 | Intel Motherboard

Not finding what you are looking for?
eMachines W3619 PC Desktop Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Avishek Samaddar
Avishek Samaddar

Level 3 Expert

639 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...