Question about Electronics - Others

Open Question

3 battery wiring 1990 bounder

Need to hook up 3 12V batteries in my 1990 Bounder motor home. Present hookup has 2 batteries in parallel and 1 in series and total of 1 positive and 2 grounds.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 243 Answers

SOURCE: MOTHERBOARD WIRING

Instructions should be in the manual found here

http://global.msi.com.tw/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=302

They sound like they are for your from usb posts on case...but thats just a gues :)

Hope that sorts it for you?

Posted on Dec 30, 2007

ACTECH
  • 80 Answers

SOURCE: OUR ROOFTOP AIR CONDITION ON

SOUNDS LIKE A BAD FAN MOTOR CHECK VOLTAGE WITH A MULTIMETER TO CONFIRM

Posted on Jul 24, 2008

  • 1201 Answers

SOURCE: 1990 Dodge Ram Wiper not working

You did everything else. You have voltage going to motor,so I would say that was it.

Posted on Jan 27, 2009

  • 12 Answers

SOURCE: electric trailer brake hookup

Truck Brake control

Red/Black stripe Black

Blue Blue

Lt. Blue/white stripe Red

White White

Orange Not used

Posted on Jul 01, 2009

  • 1 Answer

SOURCE: I need a wiring diagram for a alternator/battery isolator

I have a pop up trailer and would like to go camping self contained. This means that I need to hook up the battery to the trailer. I don't know how to get a wiring diagram for this job. How do you hook it up. I need to run lights and furnance fan. The trailer is a Rockwood bought it brand new in 1997

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2 2 ohm dvc alpine type r 12 inch subs. Each voice coil on both subs reads 2.5 on ohm meter. I need wireing diagram to hook up to a boss 2500 class a/b amp at 2 ohm


To have 2x 2 ohm subs wired up, they either need to be wired in series or in parallel. In series, they will total as a 4 ohm load to the amp (or 5 ohms if 2.5 each) and in parallel, they will be 1 ohm (may be closer 1.25 ohms I think).
If this is a mono block (single channel) amp, I can't see that you will be able to wire them for a 2 ohm loan. You may have to wire them in series to be a 4/5 ohm total as the amp probably won't be 1/1.25 ohm stable.

Apr 27, 2017 | Alpine Car Audio & Video

1 Answer

How to replace coolig fan sending unit on a 2008 chevy uplander


Why ? Did you test ? Hook up a scan tool to see if the PCM/ECM - engine computer is reading coolant temp. ? Testing not guessing ? Do you even know how the system works .

The engine cooling fan system consists of 2 electrical cooling fans and 3 fan relays. The relays are arranged in a series/parallel configuration that allows the engine control module (ECM) to operate both fans together at low or high speeds. The cooling fans and fan relays receive battery positive voltage from the underhood fuse block.
During low speed operation, the ECM supplies the ground path for the low speed fan relay, which is Fan 1 Relay, through the low speed cooling fan relay control circuit. This energizes the low speed fan relay coil, closes the relay contacts, and supplies battery positive voltage from Fan 1 Fuse 29 through the cooling fan motor supply voltage circuit to the left cooling fan. The ground path for the left cooling fan is through the Series/Parallel relay, which is the Fan 2 Relay, and the right cooling fan. The result is a series circuit with both fans running at low speed.
During high speed operation the ECM supplies the ground path for the low speed fan relay through the low speed cooling fan relay control circuit. The ECM supplies a ground path for the high speed fan relay, which is the Fan 3 Relay, and the Series/Parallel through the high speed cooling fan relay control circuit. This energizes the Series/Parallel relay coil, closes the relay contacts, and provides a ground path for the left cooling fan. At the same time the Fan 3 Relay coil is energized, the relay contacts close to provide battery positive voltage from Fan 2 Fuse 33 on the cooling fan motor supply voltage circuit to the right cooling fan. During high speed fan operation, both engine cooling fans have their own ground path. The result is a parallel circuit with both fans running at high speed.
When the request for fan activation is withdrawn, the fan may not turn OFF until the ignition switch is moved to the OFF position or the vehicle speed exceeds approximately 10 mph. This is to prevent a fan from cycling ON and OFF excessively at idle.

Feb 27, 2017 | 2008 Chevrolet Uplander

1 Answer

Removing fuel pump in 94 bounder motor home


fuel pump test start 34Ft. Fleetwood bounder - YouTube

? 2:34
www.youtube.com/watch?v=lCkpdRQBfNM
Dec 10, 2012 - Uploaded by crabjunkie2
The new fuel pump and sending unit are in the tank and all the lines are ... on to install the new harness pigtail. that does not come with the pump. this ... The joy of replacing34ft.motorhome fuel pump - Duration: 7:52. by crabjunkie2 6,459 views. 7:52 ... 1988 Fleetwood Bounder 454 engine running strong.

Sep 27, 2015 | Cars & Trucks

1 Answer

I have 2 DB drive 10 subs dvc 4ohm each VC (pt10d4) my amp is mono block 1ohm 3200 watts how to hook up series or parallel?


parallel is all positives (Red+) to all + and then keep all the negative's (Black -) together hooking them to the amp. if you dont have the big 3 upgrade (extra battery thick wire 0-4 AWG wire and an extra battery) keep it to 2 or 4 ohms and google impedance calculator and go from there. also just because your amp is 1 ohm stable doesn't mean it won't break it at 1 ohm and cranked up all the way

Apr 16, 2015 | DB Drive Car Audio & Video

2 Answers

1988 bounder by fleetwood , 454 , classs c motorhome , p30 chevy / gm motor home chassis . i need a complete wire diagram / scamatics for the whole thing , eng. lighting inter. extr. gen. where can


the wiring schematics for the chassis (vehicle ) will be in a workshop manual
the electric schematics for the home section will be (should be ) available from the body builder (Manufacturer)who fitted the home section.

Feb 15, 2015 | Cars & Trucks

1 Answer

How do i connect 4 batteries in series


Here is the way to hook them up in series, or in parallel.
There are 3 batteries in top (series) pic, but a 4th would be added in same wiring manner. Disregard the letters "ve" in diagrams, but the +/- polarity is vitally important in hookup.
.
Note that four 12v batteries hooked up in series will be 48 volts at the end terminals. (If all four are hooked up in "parallel" then the total would still be 12 volts).

If you want to supply a 12v inverter, you need to hook 12v batteries in PARALLEL.


25264091-qfq135rbyaww4100mh5sfw32-2-2.jpg

Nov 01, 2014 | Cobra 2500w Power Inverter

2 Answers

Wire 2 sub 4ohm


I am assuming these are subs, you didnt say, but that is my guess. do you want bass, or do you want to take it easy on your amp? do you have a terminal cup on your sub box, or just wires going into the box to the speakers? take it easy route: wire positive from amp to positive of one speaker, negative of amp to negative of the other speaker, with a jumper wire connecting the negative of the first speaker, to the positive of the second.
more bass route: run seperate positive and negative wires to each speaker, making sure to maintain proper polarity.

Oct 21, 2013 | Jl Audio 500/1 Car Audio Amplifier

1 Answer

Bounder wiring diagram


always connect + to a + and a - to a - thus red goes for + and black for -

Oct 12, 2013 | Electronics - Others

Not finding what you are looking for?
Electronics - Others Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...