Question about RCA Televison & Video

1 Answer

I bought a rca tv from a hotel closing down it didnt have the remote to it and I cant access all my channels how can I reprogram it with a universal remote

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

The universal remote will have several possible codes that can be used to work your TV. If the one you have programmed in is not doing the job reprogram another code. If only one code exists then you have a remote that is not fully compatible with your set. Some of the universal have this issue. Some of the RCA set required a dedicated and locked in remote. You would have to contact RCA and tell them your model number and serial number to get another remote. Beware these can get really expensive. I have included a site that you can use to find codes just in case you have lost that little paper that has the codes. http://www.rca.com/support/remote-control-support/

Posted on Apr 18, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: RCA rcr311w remote won't change tv channel to Video 1 or Video 2 channel

my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.

Posted on Apr 05, 2008

  • 18 Answers

SOURCE: I NEED THE CODES

each remote has a new setup.normarlly oo4 does it.

Posted on Mar 02, 2009

MNfisherman
  • 11896 Answers

SOURCE: Cannot find remote code for panasonic TV/VCR combo for RCA remote

Here is a list of codes for your remote. Please follow any of the links below to get your codes.
Results 1 - 10 of about 324,000 for rca universal remote codes. (0.26 seconds)
Search Results

  1. RCA Universal Remote Control-Programming Codes RCA Universal Remote Control-Programming Codes. ... The remote may already be set up to operate your brand of TV, VCR, or Cable Box. ...
    www.thompsontv.com/rcarc.html - 33k - Cached - Similar pages -
  2. How to Program an RCA Universal Remote Without a "Code Search ... wikiHow article about How to Program an RCA Universal Remote Without a.
    www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button - 42k - Cached - Similar pages -
  3. Universal Remote Control Codes Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For All and more.
    www.xdiv.com/remotes/ - 73k - Cached - Similar pages -

Posted on May 05, 2009

  • 1 Answer

SOURCE: Hotel TV remote

for phillips tvs that come out of a hotel try this code with RCA universal remote. the big remote not a small remote. 319753 followed immediately by the mute button. this will pull up the tv setup menu.

Posted on Aug 08, 2009

  • 1 Answer

SOURCE: how reprogram my universal rca remote control

hold the tv button down and keep it down and then press and hold the power button down and hold them both until the power button stays red then let go of both buttons then keep pressing the power button until the tv turns off and as soon as it turns off press the stop button and it should work.

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Universal remote for RCA tv channel 1


Something missing here. There is no channel 1 on a TV set. None of the universal remote instructions I have or have seen specify that as a first step. From your post, I believe you want to use some kind of universal remote to control an RCA flat panel TV, Can you tell me the brand of universal remote you are trying to use? The answer to the last line of your post is you don't need the original remote to "reprogram". That's what universal remotes do

Jan 04, 2013 | RCA Televison & Video

1 Answer

I have a philips I got from a hotel but i cant program the channel to 3 to hook up a dvd player even with a universal remote what do i do?


Channel 3 is probably locked out... here is how to fix it....

1) Press the Menu button on the remote or press both Volume buttons on the front of the TV to access the TV's internal menu's

2) Scroll to highlight INSTALL using down arrow on the remote or Channel - on the front of the TV.

3) Press the Right Arrow on the remote or Volume + on the front of the TV to access the INSTALL menu.

4) Scroll to highlight Channel Edit using down arrow on the remote or Channel - on the front of the TV.

5) Press the Right Arrow on the remote or Volume + on the front of the TV to access the Channel Edit menu.

6) Use the Left or Right Arrow on the remote or Volume + / - on the front of the TV until you get to Channel 3.

7) Use the Down Arrow on the remote or Channel - button on the front of the TV to select SKIPPED.

8) Press the Right Arrow on the remote or Volume + on the front of the TV to select OFF.

9) When finished press Exit on the remote or press the power button on the TV and then power the TV back on.

You should now be able to use channel 3.

Good Luck....

Jan 15, 2010 | Philips 20PT6441 20" TV

1 Answer

Changing chanal


Perhaps channel 4 is the only channel programmed? Try reprogramming your channels. Perhaps a universal remote would give you direct access to the channels. Your channel up or down won't work with only 1 channel programmed.

Jul 24, 2009 | Televison & Video

4 Answers

Philips PC7225 hotel TV - can't access the menu to reprogram it.


0621 is the code- I used 2 different universal remotes(one for menu and one for scrolling) and solved my problem- when I got to cable, I selected no and was able to use all the originally unprogrammed channels

Mar 22, 2009 | Televison & Video

1 Answer

RCA XS J25330BL cannot access full setup menu


Your best solution is to get rid of that crappy TV! Having an old tube Tv really makes the rooms look bad.

Sep 02, 2008 | Televison & Video

2 Answers

Hotel TV remote


for phillips tvs that come out of a hotel try this code with RCA universal remote. the big remote not a small remote. 319753 followed immediately by the mute button. this will pull up the tv setup menu.

Jul 31, 2008 | Philips Magnavox REM-350 Remote Control

6 Answers

Zenith TV not programmed for home purpose


If you have a remote that can access menu and your remote has number buttons and an enter key, you can follow this instructions to go to installer menu. Note that the installer menu is slightly different for each model, eg. some options are not available.

I was able to go to installer menu using two universal remotes. The remotes that I used were Dish Network 3.0IR and RCA RCU300WBL. Both remotes programmed for Zenith H2531DT TV. The reason why I had to use two remotes is that Dish Network remote was only able to access menu. It did not have ENTER key but RCA remote had ENTER key but I wasn't able to go to menu with that.

To go to installer menu (different from regular menu):

- Hold MENU for 8 seconds.
- Press 9, 8, 7, 6 and ENTER in the sequence.
You should be in the installer menu now. There should be a line that looks something like this:
03 VERT POS 13

Use SELECT button to scroll through each option, and ADJ button to adjust the values for each option. For example, to enable the front panel buttons on your tv, set KEY DEFEAT to 0. Other options that you might want to check:

CHAN LOCK which locks your TV to a single channel and wont let you change (set 0 to turn off)
START CH/VOL will set your tv to a specified channel when you turn on tv. (set 255 to disable)


You will have to look in the menu for some of the options because they are different for different TV series. A good place to find manual is on www.zenith.com or http://safemanuals.com/

I work in an old hotel and it took me few hours to figure out how to disable start channel lock. It drove me nuts. I hope someone finds this useful.

May 26, 2008 | Zenith SC652 Remote Control

1 Answer

Rca tv


1) Buy RCA remote part # 240895 original about $25.00
2) Enter channel 00 for video sometimes works
3) Channel down 4-3-2-Vid 1, Vid 2, etc. sometimes works
4) Try Auto-Program Channels selection ( can be accessed on
front of set buttons or remote

Let me know ...........................................T.

Nov 04, 2007 | RCA F32649 32" TV

2 Answers

Program universal remote


check remote first, and replace ir ditector in the tv...

Sep 28, 2007 | Orion1934 19" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...