Question about Office Equipment & Supplies

2 Answers

While using the machine it stopped working and the error message "Turn the machine off and on. " appeared. There is nothing in the manual about this. Have disconnected power for 20 minutes, but same message returns.

Posted by on

  • hsalomon Jun 19, 2009

    Same problem.

  • hsalomon Jun 19, 2009

    While using the machine it stopped working and the error message "Turn the machine off and on. " appeared. There is nothing in the manual about this. Have disconnected power for 20 minutes, but same message returns.
    Tried Marks suggestions but did not help.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 987 Answers

After that press: Menu - Scan - Copy - Scan.
It will enter in Service Mode.

1) Enter SERVICE MODE.---
By pressing Menu-Copy-Scan-Copy-Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Posted on Jun 19, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Turn off the printer for 5 minute and make sure you unplug it also from your computer and then turn it back on adn then connect it back to the computer and check if that will be working now...

Posted on Jun 19, 2009

  • Mark Gil
    Mark Gil Jun 19, 2009

    Can you please provide me the brand and model of your printer so i can give you further help..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change time on phone power max 5.8


If you have the TRU5885 model, or similar...

Setting clock to correct time:

1) Press menu.The system announces the current time. The message counter displays the day of the week (from Sunday to Saturday).

2) Press >>' or '<< until you're on correct day. It announces the day while the corresponding number for day of the week appears on base.

3) Press set/ringer to select the day.

4) Press >>' or '<< until you're on correct hour setting.The number for hour appears on the base.

5) Press set/ringer to select the hour.

6) Press >>' or '<< until you're on correct minute setting.The numbers for minutes appear on the base.

7) Press set/ringer to select the minute.

8) Press >>' or '<< until you hear correct AM or PM setting.

9) Press set/ringer to select the AM/PM setting.

A confirmation tone sounds, the system announces "time". The day and time are announced.


The page from the manual can be found here: http://www.manualslib.com/manual/184797/Uniden-Tru5885.html?page=46&term=time&selected=15

Complete manual: Uniden TRU5885 User Manual

Nov 04, 2015 | Uniden Lands Phones

1 Answer

I want to unlock my phone..


Hello. Your phone might have been network locked while trying to use with a Cambodian SIM card. You need to enter the unique unlock code to make it work with any GSM SIM card. You can get the unique unlock code for a Nokia E71 from SimpleUnlocking.com at affordable cost. Good luck.

-<()>--<()>--<()>--<()>--<()>--<()>--<()>-
..............UNLOCKING INSTRUCTIONS..............
-<()>--<()>--<()>--<()>--<()>--<()>--<()>-

1 - Switch on your Nokia E71 without any sim card.
2 - Don't bother as to what is displayed on your Nokia E71.
3 - Compose #pw+CODE+1#.
4 - The Nokia E71 would then display the message "SIM Restriction Off" and will be unlocked!

Note :For Nokia E71 mobile phones locked to the network Fido or Rogers in Canada follow these instructions :
1 - Switch on your Nokia E71 without any sim card.
2 - Don't bother as to what is displayed on your Nokia E71.
3 - Compose #pw+CODE+7#.
4 - The Nokia E71 would then display the message "SIM Restriction Off" and will be unlocked!

The letter p appears if you press the button star(*) three times quickly
The letter w appears if you press the button star(*) four times quickly
The symbol + appears if you press the button star(*) two times quickly
The CODE you need to enter is the unique unlock code for your Nokia E71

Oct 10, 2014 | Nokia E71 Smartphone

3 Answers

How do i unlock moto g android device xt1028?


Danielle

Many of our phones are now sold unlocked. If it isn't contact the current service provider. Some phones, based on their service provider cannot be unlocked.
Mark
Motorola Support

Oct 06, 2014 | Motorola Mobility GOOGLE 8GB MOTO G XT1032...

1 Answer

How to unlock a phone. Nokia lumia 520


Hi. You can unlock a Nokia Lumia 520 safer and easier using unlock code. You can get the accurate unlock code for your Nokia Lumia 520 either from your respective network provider or from any trusted vendor online like TheUnlockArena.com at affordable cost.

-<()>--<()>--<()>--<()>--<()>--<()>--<()>-
..............UNLOCKING INSTRUCTIONS..............
-<()>--<()>--<()>--<()>--<()>--<()>--<()>-

1 - Switch on your Nokia Lumia 520 without any sim card.
2 - Don't bother as to what is displayed on your Nokia Lumia 520.
3 - Compose #pw+CODE+1#.
4 - The Nokia Lumia 520 would then display the message "SIM Restriction Off" and will be unlocked!

Note :For Nokia Lumia 520 mobile phones locked to the network Fido or Rogers in Canada follow these instructions :
1 - Switch on your Nokia Lumia 520 without any sim card.
2 - Don't bother as to what is displayed on your Nokia Lumia 520.
3 - Compose #pw+CODE+7#.
4 - The Nokia Lumia 520 would then display the message "SIM Restriction Off" and will be unlocked!

The letter p appears if you press the button star(*) three times quickly
The letter w appears if you press the button star(*) four times quickly
The symbol + appears if you press the button star(*) two times quickly
The CODE you need to enter is the unique unlock code for your Nokia Lumia 520

Jul 17, 2014 | Nokia Lumia 520 Windows Phone Black

1 Answer

Can you unlock a locked nokia 7020. How


Hi. What kind of lock has the Nokia 7020 been locked to? If it is a network lock, you can unlock it safer and easier using unlock code. You can get the unlock code for a Nokia 7020 from SimpleUnlocking.com at affordable cost.

-<()>--<()>--<()>--<()>--<()>--<()>--<()>-
..............UNLOCKING INSTRUCTIONS..............
-<()>--<()>--<()>--<()>--<()>--<()>--<()>-

1 - Switch on your Nokia 7020 without any sim card.
2 - Don't bother as to what is displayed on your Nokia 7020.
3 - Compose #pw+CODE+1#.
4 - The Nokia 7020 would then display the message "SIM Restriction Off" and will be unlocked!

Note :For Nokia 7020 mobile phones locked to the network Fido or Rogers in Canada follow these instructions :
1 - Switch on your Nokia 7020 without any sim card.
2 - Don't bother as to what is displayed on your Nokia 7020.
3 - Compose #pw+CODE+7#.
4 - The Nokia 7020 would then display the message "SIM Restriction Off" and will be unlocked!

The letter p appears if you press the button star(*) three times quickly
The letter w appears if you press the button star(*) four times quickly
The symbol + appears if you press the button star(*) two times quickly

Jul 12, 2014 | Cell Phones

1 Answer

Comunication error


Hi,

At first turn the machine off, and then press the start button, reverse button and auto lock button at the same time.

-Turn the machine back on while still pushing the three buttons. After the machine has powered on, release the buttons.

-Press the + sign at the bottom of the screen, continue pressing each + sign as it appears. The machine will display a "Test Complete" message, turn off your machine.

-Wait 5 to 10 seconds before powering your machine back on, your machine will run through a diagnostic test and repair any issues it finds.

If this doesn't work;

Have you set up communication is to the "COM Port" designation within Customizer/Digitizer.

Go to >ScanCard >Communication Settings > choose the COM Port you want to use (find out what COM port the cable's using by going to your Start/task Bar in Windows>Control Panel >System >Hardware >Device Manager >Ports (COM & LPT).
There, you should be able to see what port your cable's using.

Hope this helps

Nov 03, 2011 | Janome Memory Craft 9000 Computerized...

1 Answer

Sansa 4 gig just stopped


Try and reset the player. Reset the player: 1. Slide and hold the Power switch up for approximately 20 seconds. 2. Release the Power switch. 3. To turn the player on, slide the Power switch up then release instantly. Then try this Connect the player to your computer. The screen on your player should turn on, show 'Connected' and indicate the battery charging or full. - If the player does not turn on try other USB ports or on another computer if one is available. Make sure you are connecting directly to the computer USB port and not to a USB hub. - If there is nothing showing on the screen and the player does show up in as a storage device in an explorer window, then the players screen is just not working. If you receive the error "USB Device Not Recognized" on the computer, the player is most likely failed. Additional troubleshooting is unlikely to correct the problem. <<<<< BUT TRY THIS ALSO >>>>> Check the Device Manager 1. Right-click My Computer, and select -- > Manage. Click Device Manager on the left pane. NOTE: Sansa MP3 Players can connect to your computer in MSC or MTP mode. MTP mode is the recommended and default method for Sansa Players when used with Windows OS. *** See This Tip Posted here **** --> http://www.fixya.com/support/r3774047-solve_mp3_player_connection_problem <-- Copy this address into a new window. The Sansa player will show up on Device Manager's right pane as: 1. USB Mass Storage device (if the player is set to MSC) 2. Portable Device (if the player is set to MTP mode) If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers. Refresh the drivers 1. Right-click the entry with the error mark, select Uninstall. 2. On the top menu, click Action then select Scan for hardware changes. NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then the player is most likely failed. Additional troubleshooting is unlikely to correct the problem. >>>> BUT TRY THIS <<<<<<< Connect using MSC mode Connecting in MSC mode will help determine if there is a problem with MTP mode or with the Auto Detect mode feature of the player. You can use Forced MSC mode or switch the player settings to MSC. Verifying and changing the USB mode of the device to MSC or MTP From the Main Menu, select Settings > USB Mode.

Mar 05, 2010 | SanDisk Sansa Clip MP3 Player

1 Answer

On my mp3 i had washed it on accident but the battery was dead when i did i tried to plug it into the computer it did nothing; i dried it it finally worked with my computer reading it and all; i instantly...


Try and reset the player. Reset the player: 1. Slide and hold the Power switch up for approximately 20 seconds. 2. Release the Power switch. 3. To turn the player on, slide the Power switch up then release instantly.
Then try this Connect the player to your computer. The screen on your player should turn on, show 'Connected' and indicate the battery charging or full. - If the player does not turn on try other USB ports or on another computer if one is available. Make sure you are connecting directly to the computer USB port and not to a USB hub. - If there is nothing showing on the screen and the player does show up in as a storage device in an explorer window, then the players screen is just not working.
If you receive the error "USB Device Not Recognized" on the computer, the player is most likely failed. Additional troubleshooting is unlikely to correct the problem. <<<<< BUT TRY THIS FIRST >>>>>
Check the Device Manager 1. Right-click My Computer, and select -- > Manage.
Click Device Manager on the left pane. NOTE: Sansa MP3 Players can connect to your computer in MSC or MTP mode. MTP mode is the recommended and default method for Sansa Players when used with Windows OS.
*** See This Tip Posted here **** --> http://www.fixya.com/support/r3774047-solve_mp3_player_connection_problem <--
Copy this address into a new window.
The Sansa player will show up on Device Manager's right pane as: 1. USB Mass Storage device (if the player is set to MSC) 2. Portable Device (if the player is set to MTP mode)
If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers. Refresh the drivers 1. Right-click the entry with the error mark, select Uninstall. 2. On the top menu, click Action then select Scan for hardware changes.
NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then the player is most likely failed. Additional troubleshooting is unlikely to correct the problem. >>>> BUT TRY THIS <<<<<<< Connect using MSC mode Connecting in MSC mode will help determine if there is a problem with MTP mode or with the Auto Detect mode feature of the player. You can use Forced MSC mode or switch the player settings to MSC. Verifying and changing the USB mode of the device to MSC or MTP From the Main Menu, select Settings > USB Mode.

Feb 23, 2010 | SanDisk Sansa E280 MP3 Player

2 Answers

How to solve CRU Fuse error ?



Check the TONER Cartridge and Reinstall it


CRU Fuse Error
Means : The toner cartridge is not installed correctly


You can set the machine to ignore the “[Toner Empty]”
message and to continue printing incoming faxes.

Ignoring the Toner Empty Message

1 Press Menu until “Machine Setup” appears on the display.
2 Press the scroll button < or > until “Ignore Toner”
appears on the bottom line and press Enter.
3 Press the Scroll button < or > to select “On” or “Off”.
Select “On” to ignore the [Toner Empty] message.
Select “Off” to stop printing incoming faxes when the
message appears. This is the default setting.
4 Press Enter to save the selection.
5 To return to Standby mode, press Stop/Clear.

Jan 21, 2010 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

My Xerox Phaser 6110MFP got error "Internal Error WER OFF/ON DRAM-FUNC.C 58 R". Cannot get solution from any sites. Can't use printer. Please help, thanks. weichen81@msn.com


DRAM TEST
Use this feature to test the machine's DRAM. The result appears in the LCD display.
If all memory is working normally, the LCD shows << O K >>

Jul 04, 2009 | Samsung CLX 3160fn All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...