Question about Televison & Video
Two years old viore lcd32vf62 ( 1080 HD)some horizontal lines ha appeareed recently.(from center al to bottom of screen .they are present in all inputs including menu screen and this causes doble images HELPPPPPPPPPPPPPPPPPP!!! thank you and best regards nick san german puerto rico firstname.lastname@example.org
Sounds like a panel fault. Anyway contact any service technician to confirm. If the LVDS cable, that connects the LCD panel to its T;Con board too should be checked. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magzine" will make surf easy Pull up older posts. Surf the site with patience.
Posted on Apr 18, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
horizontal line is an idication of a bad board known as a x driver board. Their may be a slight possiblitliy it can be a small ribbion cable that runs from the driver board to the plasma panel. Another possiblility it can be a bad panel... but from the symptoms you describe i would first have to look at that driver board. and the sympton that getting worse makes me lean toward a bad ribbion cable.. if that could be reseated....well that the first thing as a technician i would try. Carefull Television generate dangerous voltages.
Posted on Jan 04, 2008
Get into the TV menu and locate the H (Horizontal) and V (Vertical) picture options. . .increase the V until line at the top is gone.
Posted on Nov 12, 2009
Thats your midddle driver board on the botton m8.
Try the technique on this video if that doesn't work ,replace the board by with another of the same part number.Cheap to buy.Ebay.LCDTV Spares shops online
Posted on Jun 05, 2010
Testimonial: "thanks so much for the info mate! The issue comes and goes so I will see how it pans out before I attack it with the soldering iron!"
SOURCE: My HP 50 inch Plasma
Thanks for using FixYa. From what you have described it seems to be the issue with Y-main however, the logic board should also be checked. These boards are located on the right side of the unit and to check them you’ll have to open the back of the unit. Once you have opened the back also check for any blown/bulged capacitors. All this is only recommended if you have electrical expertise & know how to solder/re-solder components as these units contain high voltages even when in off position. The cost to get this repair will be around $300 and a bit more if the board is replaced. Please do accept the solution if the issue is resolved or post a comment for further assistance.
Posted on Sep 07, 2010
Tips for a great answer:
Dec 20, 2015 | Televison & Video
Jul 19, 2012 | Televison & Video
Jun 04, 2011 | LG 47LH50 47 in. HDTV LCD
Sep 01, 2009 | Toshiba 42HP83 42 in. HD-Ready Plasma...
Jul 19, 2008 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV
Feb 16, 2007 | Sony WEGA KLV-26HG2 26 in. HD-Ready LCD...
22 people viewed this question
Usually answered in minutes!