Question about Maytag Washing Machines

1 Answer

How to manually open locked door

4000 series

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First UNPLUG the WASHER.

There is a little white circle plastic lever that feels like an upside down lollipop about 2-3 inches below the door lock behind the front panel.. Pulling that down will unlock the door.
To access from the top of the washer remove 3 screws to the back top of the washer, push it back and then lift the top off the washer. Facing the washer slide your right hand down the space at the front corner where the lock is located. Feel around for the circular part at the bottom of the door lock and gently push it down. The door should then manually click and unlock.

To access from the bottom of the washer. Facing the washer, Remove the 3 screw to the very bottom that is holding the small access panel in place. This allows access to the bottom of the washer. Once removed, reach towards front and upwards to where the door lock is located. Feel around for a circle plastic level. Pull the level down. The door should click and you should be able to open the door.

Posted on Apr 18, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag 4000 series won't open


unplug it for a few minutes, then plug it back in.

Read more: http://forum.appliancepartspros.com/washer-repair/41589-maytag-washer-door-lock-wont-unlock.html#ixzz2qLpqCTvO
http://forum.appliancepartspros.com

Jan 13, 2014 | Washing Machines

1 Answer

Error Code F24 Maytag 4000 Series Front Load Washer


This video will show you how to open your Maytag 4000 series washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 04, 2013 | Washing Machines

1 Answer

Cannot open passenger door with the remote and the manual key but can lock. only the drivers door opens.


The central locking is faulty on the passenger door it's a common problem on the E90 models you need to renew the latch which contains the central locking actuator

Mar 02, 2013 | 2006 BMW 3 Series

2 Answers

Maytag 4000 series front loading high efficiency clothes washer. When you select your type of wash and hit start, you hear a "click," then nothing happens. About 15 seconds later, both the digital tim


The diagnostics tech sheet is in a jacket inside the base plate. While you have the plate off goahead and get the junk out the pump filter. Follow the suggestions in the tech sheet. DUET SERVICE MANUAL

Nov 12, 2012 | Washing Machines

1 Answer

2006 325 i door locks not working driver door will lock and other doors stay open if drivers door is locked it needs to be open manually back doors were locked by hand and now wont open by remote


I had a very similar situation. Was very annoying not being able to unlock or lock doors from pannel control nor from remote.
Only driver door can be opened with manual key.

Solution: One of the 15 amp purple fuses was blown. Fuses are located inside glove compartment, the interior end has to be removed releasing the two locks.
Use a light and the red tool located on the panel to remove fuses.

Oct 14, 2010 | 2006 BMW 3 Series

2 Answers

How to reset codes in Kaba ilco Unican 4000 access control


I have a Unican 4000 series door lock and need to find code for it

Dec 20, 2009 | Locks & Locksmithing

2 Answers

Frigidaire professional series electric oven door won't open


MY OVEN DOOR WONT UNLOCK ON MY FRIGIDAIRE PROFESSIONAL SERIES STOVE 31606390

Jan 22, 2009 | Electrolux Frigidaire Professional Series...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...