Question about Sewing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This problem is common in sewing machines with plastic bobbin cases. The new case you've ordered will most likely solve your problems. I might suggest checking the point of the rotating hook, to be sure it is burr free.
Posted on Feb 01, 2008
SOURCE: Bobbin Case
I'm having a similar problem today. I took out the bobbin case and when I went to put it back in, the whole system locks up. I've tired cleaning, changing needle taking the metal plate and piece that holds bobbin case out and put it all back in after cleaning. Nothing. My symptom is I can't get a complete stitch, the needle goes down, the whole deal acts like it will work and as soon as the arm of the bobbin case gets to 8 o' clock on the gears, It jams and won't hardly move. I cannot pull the bobbin case out easily after this. Perhaps there is someone out there that can help us!
Posted on Jun 23, 2008
If you go here and search for 9005, you can find a free downloadable instruction manual.
Posted on Jul 22, 2010
SOURCE: My bobbin case came out
I just had this same problem and although i could not find the answer online, I managed to fix it.
If you look at the bobbin case there are 3 different tabs sticking out.
First you need to have tab #1 under the main part of the machine, and #3 over top of the small twisted metal piece below the bottom fabric gripper.
The hard part is to get the second tab into the proper spot. I circled the piece that you need to move in red. If you move the little piece by pushing it with a flat screw driver, you can line up the bobbin case so that tab #2 is under the metal piece and the bobbin case will be properly set.
Don't give up! It wasn't easy to get it back but I did it, I'm sure you can too!
Posted on Sep 06, 2012
Tips for a great answer:
Nov 25, 2017 | Singer Sewing Machines
Jun 05, 2017 | Singer Sewing Machines
Jul 15, 2016 | Brother Sewing Machines
Jul 14, 2016 | Singer Sewing Machines
Mar 29, 2016 | Singer Promise 1408 Sewing/Quilting...
Dec 13, 2015 | Singer Sewing Machines
May 01, 2015 | Singer Sewing Machines
Feb 02, 2014 | Singer 7462 Mechanical Sewing Machine
May 20, 2012 | Singer 2263 Mechanical Sewing Machine
Sep 19, 2009 | Singer Sewing Machines
57 people viewed this question
Usually answered in minutes!