Question about RCA 20F511T TV

Open Question

Cable tv stuck on mono - RCA 20F511T TV

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Source button does not work The hisense Tv cannot respond to change to hdmi and is stuck on monotv


new batteries. But that won't solve the problem if the universal remote apply other code. when the original remote is applied, you touch the tv icon to be sure you are using the correct parameters. When it still won't solve the problem you go to the ir circuit on the set. the reason may be because of the accumulation of the dust and dirt on the buttons.

Apr 30, 2016 | Hisense Televison & Video

1 Answer

My samsung lcd tv stuck on bbc 1 on mono it wont go off screen


pl.see whether the other channels were locked inadvertently 2)if you have set top box remove the connection and connect the cable to antenna slot if you could change channels set top box is defective other wise tuner problem

Feb 18, 2015 | Samsung LN32A330 32 in. LCD TV

1 Answer

How to tune samsung tv


Mono is the first point I am stuck on. Mono is an audio reference but I am going to assume that you are only receiving the analog channels and not the digital. If you are coming off of an antenna then the antenna has to be HD to receive HD channels over the air. If you are off of a cable box then this has to be dealt with from your provider. You will also need an HD ready TV or if you do not you will need an HD converter box to make your tv work with the digital signal.

Apr 02, 2014 | Televison & Video

1 Answer

How do I get a stuck vcr tape out?


Hello,
As far as I examine this model on the web,I discover that your TV has the following features as:
  • Feature: Combination TV/VCR featuring 13-inch TV and 2-head mono VCR
  • Feature: Front AV input jacks for game system; 181-channel tuner for access to unscrambled cable broadcast
  • Feature: 1 video, 1 audio (mono) input in front; RF coaxial antenna input in back
  • Feature: Mono output and built-in speaker; headphone jack
  • Model: MV13M2
This means that you do not have "A/V output" jack to complete your desire..
Sorry about it..
Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!



http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

Jun 22, 2011 | Toshiba MV13M2 13 in. TV/VCR Combo

2 Answers

My tv stuck on mono how to get off mono


On the original TV remote press the "AUDIO" button until it gets to the option "MAIN" and this should get the stereo sound back.

Good luck...

Jan 08, 2010 | iLO IWT3206 TV

2 Answers

Left speaker works in all modes except the tv mode


It sounds like there must be a bad connection on that input. Try switching the left and right input cables for the TV and see if you get the left cahannel working. If so, investigate a possible bad cable or output issue from the TV.

Dec 26, 2009 | Bose 3 2 1 GSX System

2 Answers

Sharp Aquos LC-32D44U stuck in ""Mono"


I dont know if this will work for you, but its worth a try. I had the same problem.

1. I changed to a station that was having the problem (an analog station with MONO displayed on the screen).
2. I unplugged the TV for about 15-20 minutes. (I was thinking maybe something needed to refresh, so thats why i unplugged the tv.)
3. I plugged the tv back in and voila. The station showed up as MONO then immediately swtiched to STEREO.

After that, i was able to use the AUDIO feature on the remote to actually change from MONO to SAP, etc.

Ive had my Sharp for about 5 months now, and thats the first time its happend to me. Luckily, i solved the problem...this time.

Hope it helps.

Feb 12, 2009 | Sharp AQUOS LC-32D44U 32 in. LCD TV

1 Answer

Stuck in mono thus no sound


does this monitor have a sound cable connector?
check the cable connections and see if it goes to the sound output on the back of the computer

Jun 09, 2008 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

No service


  • Make sure that you have connected the cable box properly to the TV.
  • Use the audio and video OUT from the box to the TV IN.
  • Select the correct input on the TV.
  • Connect it using any of the following: A HDMI cable (1 cable for both audio and video), Component Cables (3 RCA's red, green, blue) + RCA audio cables (1 for mono or 2 for stereo), S-Video + RCA audio cables (1 for mono or 2 for stereo), or AV cables - 1 RCA for video (usually marked yellow) + RCA audio cables (1 for mono or 2 for stereo).
  • Consult your TV's owner's manual for detailed instructions or ask me for more information.
Hope this helps. :)

Apr 01, 2008 | Televison & Video

Not finding what you are looking for?
RCA 20F511T TV Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...