Question about Honda Garden

Open Question

Cultivator cjd 1002 parts

Shaft bushing

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i get the worm gear tiller drive sprocket for my cjd-1002 cultivator


Your5 only real choice is the dealer of the product or maybe Sears has it. Sears carries parts for many brands besides their own.

Sep 06, 2016 | Garden

1 Answer

TRYING TO FIND OUT WHAT SIZE,YR.THIS V8 IS TO305CJD.THANKS.


Not sure but this looks like the steel stamp on the front of the engine and if it is the "T" is the plant location, the o3 is the month of build and o5 is the date of build. The CJD is the suffix of the engine at the plant. The suffix tells the plant operators what parts to put in the engine as it goes down the assembly line. To the size of the engine you can look up the suffix of CJD and it will tell you.

Apr 19, 2015 | Chevrolet Cars & Trucks

1 Answer

Can anyone give me installation instructions for a pickup roller assembly on a HP m3027x mfp? Part number 5851-4012 (formerly RM1-3762).


Tip the device over on its rear side, with the top of the device facing you.
2. Rotate the bushings on each side of the roller upward.
3. Remove the left-side bushing by sliding the bushing to the left.
4. Slide the roller and shaft toward the left until they clear the hole in the right-side bushing, and then
lift the right end of the shaft.
Slide the roller and shaft toward the right, and then lift the roller and shaft together out of the device.

Oct 24, 2013 | HP LaserJet M3027 MFP Printer

1 Answer

Have been on the computer all morning many diff sites getting a nervous breakdown want tine geat & shaft part for earthquake mini tiller all sites are impossible to use help help help


Select the model on this website and then the part. The link below is for MC43E Mini Cultivator http://www.getearthquake.com/foundations/store/partsblowup.asp?product=MC43E

Jul 19, 2010 | Ardisam Inc Earthquake Mini Cultivator

1 Answer

Flexshaftsent is 6 inchestolong


Check here and see of the part sent is the same as this part number (item 9) 753-04987 Flexible Drive Shaft

The manual page 2

http://www.oscar-wilson.com/MANUALS/BOLENS/21B-121R765.PDF

If it is the same part number then you may not have the mating faces aligned in both ends. I.e where it slides into the engine and the transmission.

Aug 14, 2009 | Ryobi Cultivator

1 Answer

I raised the tires on my earthquake cultivator now i can't lower them


You need to remove the axle bolt and tap the thumb style nut loose its corroded to the shaft, lay parts out as you remove them to get reassembly correct.

Jun 28, 2009 | Ardisam Inc Earthquake Mini Cultivator

1 Answer

Worm pin on yard machine cultivator broke, don't need the whole drive shaft, where can I get just the pin?


Go to... http://www.buymtdonline.com/webapp/wcs/stores/servlet/FindingYourPart_10101_19502_-1 click on Option 1, choose your brand (Yard Machines), and enter your model # then search for your part. If it is available there, you can order it form any MTD dealer or order it online.

May 17, 2009 | Yard Machines Cultivator

3 Answers

1957 Sunbeam Twin-Blade electric lawn mower shaft bushing


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=654762
Generic problem for all Vacuums
1957 Sunbeam Twin-Blade electric lawn mower shaft...
Posted by mower man on Jun 08, 2008
I have a late 50's series Sunbeam twin-blade electric lawn mower that I use regularly. The shaft bushing(s) on the left blade has worn out, and there's too much play for me to run it w/o ruining the machine.
It appears that the belt-run cog inside the housing is the part that is supposed to come off of the shaft to get to the bushings, but instead of a cotter pin or other fastener holding the cog in place, it looks like a rolled metal pin that may have been pressed in place.
How do I replace the shaft bushings so I can keep using this great vintage appliance!? I found a website that supplies parts for this model year, but no schematics or user manuals. Thanks!


Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. This website is for vacuums and you would need to contact a local lawn mower shop in the yellow pages, they are amazing about the way they can fix old lawnmowers.

So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 08, 2008 | Vacuums

Not finding what you are looking for?
Garden Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

John Trevino

Level 3 Expert

1383 Answers

JOHN LAPIER

Level 3 Expert

2422 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...