Question about Samsung Freezers

Open Question

Problem with the program

The program is likely works better ignition and shutdown

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want freeze


try pulling out fridge unplug clean under it and clean fan blades 1st and see if it works better, if not may need a charge mike

Aug 14, 2014 | Freezers

1 Answer

Orange light


Good Morning Raj, thank you for your post!

Are you referring to the orange light on the freezer is not working or the freezer itself is not running? May I have the model number? The serial tag, which lists your model number, is typically located inside the cabinet, on the left side wall. With this information I can better address the issue at hand.

Oct 14, 2013 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...

1 Answer

T-49F Thermometer


you are right but you should read the catalogue.

Mar 04, 2013 | True Freezers

1 Answer

American fridge freezer, ice maker broke. how do I fix it.


When you say not working, do you men the bin control arm is broken off or the water supply is off to the ice maker. Give me. Little more info s to specifics o I cn help better.

Feb 06, 2013 | Frigidaire 12 cu. ft. / 340 liter Upright...

1 Answer

Convert r-12 to r134a


if the compressor is r12 and want to use it with 134a you need to change the oil in the compressor before you do the change, and while you change if make sure that he 1st 50oz of gas you charge it with the compressor off. its recommended r12 because it works better at high temperature.

Sep 05, 2012 | Sub-Zero Freezers

1 Answer

Not getting cold enough on the inside... the exterior too hot to touch.. why could this be?


Compressor relay could be fried. Feel the compressor. If it is too hot to touch then check your relay. The relays contacts could be welded together making bot windings stay powered up and overheating the compressor causing compressor shutdown on overload.
themobilian_2950.jpg

Sep 02, 2011 | Whirlpool 14.8 cu. ft. / 419 liter Chest...

2 Answers

IT CHIRPS LIKE A BIRD. iT SEEMS TO BE WORKING GOOD BUT MAKES THAT NOISE AND HAS BEEN FOR A WHILE. iTS A SEARS KENMORE UPRIGHT FREEZER.


Check the fan blade. It sounds like it is rubbing. Usually they will rub the shroud and can be easily fixed by simply bending the shroud slightly. Hope this helps. Good luck.

Dec 03, 2009 | Kenmore Freezers

1 Answer

Frigidaire Fridge/freezer works then doesn't work???


every 6-8 hrs your ref. goes into a defrost mode. sounds to me like your fridge is getting stuck in defrost, may want to replace defrost timer roughly 18-45.00 dollars depending were you live. also ive seen a few that the electrical cord in back were it goes into ref mid way up to the left behind cover can have some loose connections back their; remove panel covering and inspect. becuz if its the timer it wouldnt cause the light not to work so it may not be your timer if the light it turning off.also make sure your outlet is good and the prongs on power cord are not loose. hope this helps

Sep 23, 2009 | Frigidaire Freezers

1 Answer

Smell from fridge freezer even after thorough cleaning and disinfecting and defrosting Model Hotpoint RFA52. Temperature control OK


Put Charcole brickets in the refrigerator. Charcole works better than baking soda and usually take care of the smell.

Feb 20, 2009 | Hotpoint Freezers

1 Answer

Haier freezer hcm050La comes on then shutdown


could be overload, and relay , but more chance the compressor is drawing excess amps and needs replacing

Nov 25, 2008 | Haier 5 cu. ft. / 142 liter Chest Freezer...

Not finding what you are looking for?

Open Questions:

0 Answers

ca. 2010 GE fridge with Samsung ice maker. I have to hold the reset on the icemaker every few days to keep making ice or it quits. What's the fix? When it works, there's a loud popping every 3 seconds for about 2 minutes, then a few minutes later ice harvests into the bin. With my hand against the outside of the fridge next to the icemaker, I can literally feel each pop. I originally thought it was the ice release heater failing that caused cubes to pop loose hard, but I couldn't find anything wrong electronically when I took things apart and examined the board and connections in the icemaker. I may have missed something mechanically that's causing some part to flex and then suddenly give against the wall inside every 3 secs as the clock cycles through the beginning of a harvest? What might that be? But after reassembly it now has the added feature of harvesting a few times and then stopping altogether. We run flat out of ice if I forget to press and hold the reset button for 10 secs. every few days. Apparently the clock is cycling incompletely or something now. Could a cog be missing/broken/out of alignment in the clockworks, such that when it gets so far along it slips, but can be reset? How about the lift arm? Could it be out of position inside such that something it's connected to isn't properly repositioning when the arm drops back down? Or could all of this be related to a faulty control board elsewhere in the fridge?

Apr 19, 2017 | Samsung RS261MD 26 cu. ft. Side by Side...

Freezers Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Freezers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

ray gallant

Level 3 Expert

41478 Answers

Are you a Samsung Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...