Question about Dynex DX-LCD32-09 LCD TV
Turns on but keeps flashing on and off the words please wait, what should I do
The fact that Please Wait appears on the screen that the power board is fine. I would unplug the tv for 4 hours and plug it back in to see if the same thing happens. It does appear that you need to replace the main board,
Posted on Apr 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Power at the outlet? ok?
Plugged in the outlet? ok?
Power cord plugged in to the REAR of the tv very snug? ok?
Using the remote? Batteries ok? ok?
Red light on? ok---- Unplug the tv for a few seconds and retry. ok? Still no-go?
Unplug the tv and remove the rear cover, remove the stand screws to do this. ok?
The small circuit board ( you will be certain you have the correct board simply because it is the smaller of the two boards. The Mother board is much larger. Another way to be sure you have the correct board is to folow where the power cord connects to the tv----that board!!! )ok?
Now, very important!
There are small components called CAPACITORS. They are approx. 1/2 inch high and about the size of your pinky finger around. They all look about the same, but vary in size. They will have an "X" marked on the top usually. Now, this is what to look for! They must be FLAT on top. If they are round, buldging, or burnt then they are BAD!!! Take care and you can easily remove the board by simply removing the wires and screws from the board. (be sure to draw on paper where things go or otherwise mark where they go so reinstalling the board will be rather easy)
Remove any glue from them carefully and then using a soldering iron or gun just simply melt the solder on the rear of the board and pull them out. Take them with you to your local electric supply store and solder in the new ones. Look for any bad ones on the MOTHER board also and replace if needed. Rarely are they bad. The problem is nearly always with the POWER board.
With everything hooked back up and put back together, plug the tv in to the outlet and turn on the tv. Voila, enjoy!
NOT willing to do this. Well, simply get the model number, etc., and google the power supply for it and order it. Install it, trust me you CAN do this, and There you go. Enjoy!!!
Posted on Apr 09, 2011
SOURCE: No picture but I have sound
Try a hard restart, which simply means unplugging the power cord of the TV, and replugging it after 4 hours have passed. This technique reprograms the electronics, to a certain extent. If the picture does not return, then your TV has a more serious problem, that requires the attention of a repairman.
Posted on Jul 06, 2008
SOURCE: Dynex 37" LCD won't power on
You may either poor 24vdc power supply problem or failing backlight inverter board, you need to check the voltages before and after the set acts up.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
Please post back what you find
Posted on Jul 24, 2010
SOURCE: dynex 24" lcd led tv
Check to see if mute is on, and through the menu to see is sap is on. Sometimes button are accidentaly pressed. If none of the above, the ntry replaceing your main board.
Posted on May 05, 2011
SOURCE: remote code for 26" LCD Dynex tv
Remote code for who? Dish network? Comcast?
CableVision UR2-CBL-CV04 code: 096
Charter DIGITAL code: 0463
Comcast M1057 code: 0463, 10463
Cox COX code: 0463
Direct TV RC23 code: 10463
Dish Network VIP508 code: 720
Dish Network VIP622 code: 720
Motorola DRC800 code: 0463
One for All URC-6690 code: 0464
Phillips PDVR8 code: 115
Phillips PH5DSS code: 115
Phillips PHDVD5 code: 115
Phillips PMDVR8 code: 115
RCA RCU807 code: 135
Rogers DCT3250 code: 0463
Shaw DCT3416 code: 0463
Sony RM-VL600 code: 8043
TiVo HD code: 0091
TiVo SERIES 3 code: 0091
Posted on Jun 15, 2011
Tips for a great answer:
Feb 09, 2017 | Dynex Televison & Video
Feb 07, 2015 | Dynex Televison & Video
Jul 27, 2014 | Dynex DX-L32-10A 32" LCD HDTV
Jun 02, 2014 | Dynex 32 in. LCD Flat-Panel HDTV
Nov 30, 2013 | Dynex 32 in. LCD Flat-Panel HDTV
Oct 15, 2013 | Dynex DX-L42-10A 42 in. LCD TV
Sep 10, 2012 | Dynex DX-LCD32-09 LCD TV
Aug 16, 2012 | LG 42LC2D 42 in. LCD HDTV
Nov 15, 2010 | Dynex 32 in. LCD Flat-Panel HDTV
Jun 19, 2008 | Dynex 32 in. LCD Flat-Panel HDTV
527 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: