Question about Cameras
Your SD card may have failed. Have you tried a different SD card in your camera? If you have and it still isn't working, it may be the camera.
Posted on Apr 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My yashica EZ F 527
OK, if the memory card itself is locked, you might sometimes get this error code. All you need to do is to take out the memory card and switch the lever on the left side to the unlock.
If the error is still displayed after you did the above, you might want to try the card in another camera.
If the card works in another camera . the problem is with your card reader in your camera.
If you open you sd slot and look inside with a sharp light , you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. This switch work as follows:
1. When no card is inserted / no write protection , the switch is open and thus the protection is off.
2. When locked card is inserted , the tab is depressed and tells the camera that the card is lock.
Contrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. If you put a locked card into a camera without a sd lock switch , you would still be able to use the card normally.
It is incredible difficult to fix this switch because of space limitations in the sd card. Look into the sd slot and if you can see the switch , use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it.
If this does not resolve your problem , there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error. This should cost no more than $50.
Please feel free to contact me if you need further information
Posted on Aug 30, 2010
Tips for a great answer:
May 19, 2014 | Cameras
Nov 08, 2012 | Cameras
Oct 01, 2011 | Kyocera Yashica T4 35mm Point and Shoot...
Apr 16, 2011 | Cameras
Aug 30, 2010 | Cameras
May 30, 2010 | Cameras
Apr 27, 2010 | Cameras
Apr 19, 2010 | Cameras
Nov 14, 2009 | Cameras
Sep 03, 2009 | Canon PowerShot SD630 Digital ELPH / IXUS...
Nov 24, 2017 | Cameras
52 people viewed this question
Usually answered in minutes!