Question about Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

My Panasonic Lumix DMC-FZ28 will not power on, although the battery has been charged.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Panasonic Master
  • 6,702 Answers

More than one possibility can cause this. Your battery can be on the end of life. Only when the battery works in another camera, of the same model, you can check the capacity. Or with a multimeter, but you must have some electronic skills. Then the contacts on both the battery and in the camera can be dirty or oxidised. Sometimes users manage to put in a battery the wrong way around. This should be virtually impossible with your camera. Try cleaning the contacts in the camera and on the battery, using some cotton swabs. Never use anything sharp.
Then again try charging the battery. Look if the charger light starts green. And is it stops after some time. If you already charged the battery, it could be the light goes out after a few minutes.
If the charger light starts flashing, you know something is wrong with the battery to the connectors. Don't forget to close the battery cover correct. There is a switch, and if the door is not locked correct this switch still indicates open battery door and the camera won't switch on. Check your manual page 17 and 18.

Posted on Apr 17, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Looking for viewfinder is blurry (Panasonic Lumix DMC FZ28)

There's a small dial on the left side of the viewfinder (next to the flash button) that allows you to focus the viewfinder. I only found it because I had the same problem - must have knocked it out of focus by accident!

Posted on Dec 31, 2009

  • 1 Answer

SOURCE: Lumix dmc-ts1 will not turn on after taking underwater pictures

I had the same problem, half way through snorkelling the screen just went black and the camera wouldnt turn back on, HELP PLEASE!!!

Posted on Mar 07, 2010

rajdeepdutta
  • 2517 Answers

SOURCE: when i turn on my panasonic lumix dmc fz28 it shows system error

HI there the camera lens guide pin is damages and thats why not zoom the image properly . You got the system error message. So you need to replaced or repair the lens guide pin. Thanks.
6f1ef6a.jpg

Posted on Apr 01, 2010

  • 1705 Answers

SOURCE: windows 7 compatible driver for panasonic lumix camera dmc-ls70

You need to go to the lumix website and follow links to support and/or downloads for drivers.

Posted on May 02, 2010

ZJLimited
  • 17970 Answers

SOURCE: Panasonic Lumix DMC-FH20 shows "SYSTEM ERROR

Sounds like the Focus and Optical Image Stabilization drive motors are bound or broken. To fix this wrong will need disasemble the lens unit, focousing unit to do service; if needs, replace the damaged parts and assemble to run normally. Don't do this if your camera is under warranty.

Or, unless there are no marks on the case and they wouldn't think that it had been dropped or gotten wet, well you know, Panasonic will normaly repair or replace it as long as it is due to manufacture defect.

Hope this helps.

Posted on Jun 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Panasonic Lumix DMC-FZ28 will not power on, although the battery has been charged.


Previously posted and asked question. Does unit do anything?
Remove and replace battery.

Apr 17, 2014 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

Where do I load 2 batteries in the digipower rapid charger


Panasonic DMW-BCG10, DMW-BCG10E, DMW-BCG10PP Battery, Technical Specification: Battery Type: Li-ion, Voltage: 3.60V, Capacity: 895mAh. Dimension: 41.60 x 30.40 x 9.40 mm, Product Type: Replacement Battery (Brand New). Compatible with: Panasonic Lumix DMC-TZ10 Series, Panasonic Lumix DMC-TZ18 Series, Panasonic Lumix DMC-TZ20 Series, Panasonic Lumix DMC-ZR1 Series, Panasonic Lumix DMC-ZR3 Series, Panasonic Lumix DMC-ZS1 Series , Panasonic Lumix DMC-ZS10 Series, Panasonic Lumix DMC-ZS3 Series, Panasonic Lumix DMC-ZS8 Series, Panasonic Lumix DMC-ZX1 Series, Panasonic Lumix DMC-ZX3 Series. Panasonic Lumix DMC-TZ22, Panasonic Lumix DMC-TZ6, DMC-TZ8 and Panasonic Lumix DMC-ZS5, DMC-ZS7.
Panasonic DMW-BCG10 Battery

Jun 04, 2012 | Digipower Battery Charger

1 Answer

Using instructions required


Hi there,
You can download the Panasonic Lumix DMC-FZ8 Manual ( Operating Instructions) here:

Panasonic Lumix DMC-FZ8 digital camera Operating Instrutions (10.7MB)


Have fun :)



Apr 18, 2010 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

INSTRUCTION


Download Instruction Manual of DMC-FZ28 from Panasonic Support.

Jan 02, 2009 | Panasonic Lumix DMC-FZ28 Digital Camera

Not finding what you are looking for?
Panasonic Lumix DMC-FZ28 Digital Camera Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...