Question about Singer Sewing Machines
I need a diagram for threading a singer sewing machine model 111w155
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Cotton omn the reel pin, take the thread from the right to the left and through the top cotton guide above the takeup lever, make sure the takeup lever is at the top and make sure the presser foot is up, take the thread down the right hand side, round the tension unit and back up the left hand side to the takeup lever, right to left through the takeup lever and then follow the guides all the way down to the needle and thread front to back, flat side of the needle must face back.
when you put the bobbin in, bobbin in your left hand and the thread must feed from the bottom of the bobbin, drop the bobbin, through the groove and lay the thread to the back.
Posted on Feb 12, 2010
Use this link to go to the Singer website and type in "3116" in the search. You can buy a hard copy for $15 or their is a free download.
Hope that helps,
Posted on Jun 06, 2010
Testimonial: "thanks so much... this was definately more than i expected"
Send an email to me at email@example.com and maybe I can help. I'd need more info. on your ploblem. I'll start you off with these two things assuming that your difficulty is with the bobbin as you state "underneath & threading". Notice the white painted dot on the the machine arm at the drive pully. Notice the white dot on the pully. Allign these two. Tilt the entire machine head back so that it is resting on the word verticle finger stop (or get underneath the machine). Bobbins are loaded by pulling the small chrome lever w/ your thumb & index finger (this is an unlocking latch). Do so moving it outward to about 90 degrees. Usually while you do this the holder and bobbin just pop out. To install u just snap then on. It's placed when u hear a click. For more info email me directly. Doug
Posted on Jun 18, 2010
Tips for a great answer:
Oct 31, 2015 | Singer Sewing Machines
Jan 17, 2011 | White Sewing 2200 Multi-Tasker
Nov 15, 2010 | Singer Sewing Machines
Jan 14, 2010 | Singer 3116 Simple
Dec 17, 2009 | Singer 7442 Mechanical Sewing Machine
Oct 18, 2009 | Singer Electronic Sewing Machine
Sep 07, 2009 | Singer 3116 Simple
Aug 17, 2008 | Singer 2638 Mechanical Sewing Machine
Jul 03, 2008 | Singer 7462 Mechanical Sewing Machine
Aug 22, 2017 | Singer Sewing Machines
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: