Question about Pioneer AVIC-N2 Car DVD Player

1 Answer

Display jammed The display screen on my AVIC-N2 will not pull out. When I hit the button it makes the little noise but nothing happens. Is there a way to repair this or am I out of luck

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Pioneer has a recall on the ribbon cable that controls the screen! Go to there website.

Posted on Jun 24, 2009

  • tek54 Jun 24, 2009

    January 3, 2007
    Dear Valued Customer:
    Re: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2
    We
    would like to inform you of a potential service issue with Pioneer's
    AVIC-N1 and AVIC-N2. If you are not experiencing any issues currently,
    there is no need to take immediate action because the one-time fix to
    resolve the issue will be available if an AVIC-N1 or AVIC-N2 later
    experiences the service issue. Importantly, the service issue does not
    pose any health or safety risk.
    Pioneer is aware of a potential
    issue with the flex-cable powering the flip screen to the AVIC-N1 and
    the AVIC-N2. After a number of power cycles, the cable has been
    observed to fail and cause the unit to malfunction (symptoms may
    include, but are not limited to, the flip-screen becoming blank) --
    flex-cable failure can only be confirmed by Pioneer; standard service
    charges may apply for service issues not related to the flex-cable
    upgrade.
    This issue may affect almost all AVIC-N1 units and
    AVIC-N2 units. Please contact Pioneer at the number listed below if
    you have a question about whether your AVIC-N1 or AVIC-N2 unit is
    affected by this issue, or if a specific malfunction affecting your
    AVCI-N1 or AVIC-N2 is related to this issue.
    To address this issue,
    Pioneer is providing a one-time cable upgrade to consumers for their
    AVIC-N1 and AVIC-N2 at no charge to consumers for parts and labor.
    Pioneer will offer the free upgrade either upon request or
    automatically if an affected unit is serviced for another reason.
    Pioneer will exclusively perform the free cable upgrade for all units
    (i.e., no other service facility should perform the cable upgrade).
    If
    you own an AVIC-N1 or AVIC-N2 and you are experiencing the service
    issue, please contact Pioneer Customer Service toll free at
    800-421-1603 to arrange for the cable upgrade. Pioneer service
    representatives are available Monday through Friday, 9:00 a.m. to 7:30
    p.m. (Eastern Time).
    Customers who have paid for the cable upgrade
    are eligible for reimbursement of certain service costs if sufficient
    proof of service can be provided -- please contact Pioneer at the
    above-listed phone number for more information regarding reimbursement
    rules.
    Customers can also review FAQs regarding this service issue. Click here to view the FAQs.
    We
    sincerely apologize for any inconvenience this service issue may cause
    you, and we thank you for your cooperation and continued support of
    Pioneer.
    Sincerely,
    Pioneer Electronics (USA) Inc.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can you hook up an ipod to a pioneer avic n2


Use the CD-IB100ii from Pioneer. This will allow charging, text display and audio, but not video.

May 08, 2009 | Pioneer AVIC-N2 Car DVD Player

1 Answer

No audio an Avic-n1 and Mute button display


We can fix this and all other AVIC N1 N2 N3 problems.

Please visit www.turbotunes.com for affordable AVIC repairs.

-Steve

Feb 13, 2009 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

3 Answers

Display not working


just got a tech bulletin from pioneer in my bulk mail(almost trashed it). they said its a recall on all avicn1 and 2's. the ribbon wire going from unit to screen fails after many cycles. they are issuing free repair.

Notice: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 To: January 3, 2007 Dear Valued Customer: Re: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 We would like to inform you of a potential service issue with Pioneer's AVIC-N1 and AVIC-N2, inform you of our plans to resolve this service issue, and ask for your help in notifying consumers. If a consumer is not experiencing any issues currently, there is no need for the consumer to take immediate action because the one-time fix to resolve the service issue will be available if an AVIC-N1 and AVIC-N2 later experiences the service issue. _Importantly, the service issue does not pose any health or safety risk._ Pioneer is aware of a potential issue with the flex-cable powering the flip screen to the AVIC-N1 and the AVIC-N2. After a number of power cycles, the cable has been observed to fail and cause the unit to malfunction (symptoms may include, but are not limited to, the flip-screen becoming blank) -- flex-cable failure can only be confirmed by Pioneer; standard service charges may apply for service issues not related to the flex-cable upgrade. This issue may affect almost all AVIC-N1 units and AVIC-N2 units. Please contact Pioneer at the number listed below if you have a question about whether your AVIC-N1 or AVIC-N2 unit is affected by this issue, or if a specific malfunction affecting your AVCI-N1 or AVIC-N2 is related to this issue. To address this issue, Pioneer is providing a one-time cable upgrade to consumers for their AVIC-N1 and AVIC-N2 at no charge to consumers for parts and labor. Pioneer will offer the free upgrade either upon request or automatically if an affected unit is serviced for another reason. Pioneer will exclusively perform the free cable upgrade for all units (i.e., no other service facility should perform the cable upgrade). If you own an AVIC-N1 or AVIC-N2 and you are experiencing the service issue, please contact Pioneer Customer Service toll free at 800-421-1603 to arrange for the cable upgrade. Pioneer service representatives are available Monday through Friday, 9:00 a.m. to 7:30 p.m. (Eastern Time). Customers who have paid for the cable upgrade are eligible for reimbursement of certain service costs if sufficient proof of service can be provided -- please contact Pioneer at the above-listed phone number for more information regarding reimbursement rules. Customers can also review FAQs regarding this service issue. Click here to view the FAQs. We sincerely apologize for any inconvenience this service issue may cause you, and we thank you for your cooperation and continued support of Pioneer. Sincerely, Pioneer Electronics (USA) Inc. *Pioneer Electronics (USA) Inc., 2265 East 220th Street, Long Beach, CA 90810* ------------------------------------------------------------------------
___________________________________________
owner of
Motion Marine & Car Audio
the florida keys

Dec 08, 2008 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

1 Answer

No picture on display, buttons dont work


The problem is the ribbon cable,and you right there is a recall for this model,you need to contact Pioneer at pioneerelectronics.com and they should repair it for you at no cost.

Dec 02, 2008 | Pioneer AVIC-N2 DVD/CD/navigation receiver...

1 Answer

My Avic d3 won't eject


Try holding the menu and left arrow button at the same time you hit the (little) reset button. As the system reboots hit the eject button a few times. You may need to do this cycle more than once.

Nov 15, 2008 | Pioneer AVIC-D3 Car DVD Player

1 Answer

AVIC-N2 Head Unit retraction problems


I don't know if this will help. Try going into the A.Menu, Go into Setup menu, And it should be set Back flap on.

Jul 31, 2008 | Pioneer AVIC-N2 Car DVD Player

1 Answer

AVIC-N2 stopped working and wont stop flashing PLEASE HELP!


Sound like the ribbon cable because before breaking off completely the vibration of the engine can cause current to fade in and out(open and close circuit).

Nov 19, 2007 | Pioneer AVIC-N2 Car DVD Player

1 Answer

My AVIC-N2 will turn on but nothing will happen?


hi
sounds like the flexi cable is faulty

part you need is gxx1257

www.carradiospares.co.uk

its not to hard to change as long as you take your time .

Mark

www.blueice-electronics.co.uk

Aug 13, 2007 | Pioneer AVIC-N2 DVD Navi Rcvr with 6.5"...

1 Answer

Avic n2


Ok are you sure you connected it up exactly as B4? Check it, any Fuses, Connections etc. If ya have,& it's OK, then I would be very cross at the Shop that charged ya $200.00 and it's still faulty... Don't muck around send it, or if possible take it, back and complain long and loud... this is really unacceptable. If you were my customer I would be bending over backwards to help.

Aug 04, 2007 | Pioneer AVIC-N2 Car DVD Player

1 Answer

Pioneer AVIC N2 pb


Contact Pioneer Tech Support. It might be your ribbon cable. There is a free repair (shipping cost only), due to a defective ribbon cable for the display.

Mar 26, 2007 | Pioneer AVIC-N2 Car DVD Player

Not finding what you are looking for?
Pioneer AVIC-N2 Car DVD Player Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...