Question about NEC Electra Elite DTU 16D-2 Corded Phone

Open Question

Nec elite 48 caller id

Want to change a coi 8 to a coi8B slot 4 5.02 software. it will not accept coid8 in program 7-1 card assignment. slot 3 has a working coid4

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 149 Answers

SOURCE: caller id not working

the directory key is storage for caller id. dtr80 is not the type of system but the type of phone.
The system needs to have other components like a mif card in order to store caller id.
Also if your phone does not ring with incoming outside call than you will not get caller id.

Posted on Nov 13, 2008

  • 1 Answer

SOURCE: Changing amount of rings when going to voicemail

The call forwarding was turned off. To turn on, press speaker, enter 793, press 1(for set), press extention number, and enter 300. If you have call forwarding on and are looking for more rings, do the above steps except press 2 (for clear).

Posted on Nov 20, 2008

  • 149 Answers

SOURCE: I have a 4 line NEC Dterm 80 phone. How do I recall the past

depends on the type pf system. Do you have a coib installed in the system? Is caller id setup or programmed? If there is no mif card in the switch you cannot save caller id info. It only shows up when the phone rings and while on the call. There should be a directory key that you can price to scroll through the numbers if everything above is correct. ldtsnj.com

Posted on Jan 02, 2009

  • 149 Answers

SOURCE: Caller ID Scroll

Your system needs to have a mif-m card and kmm chip installed and all programming setup in order to scroll through the caller id. If this is all setup you can hit the directory button and than use the arrow buttons under the display to scroll. ldtsnj.com

Posted on Jan 02, 2009

  • 63 Answers

SOURCE: Caller ID for NEC Electra Professional Level I System (KSU)

only if your key system has caller id cards installed.

Posted on Feb 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I need a nec coid4 to have caller ID on the electra elite 48?


Yes, and depending on your CPU level this may only work on up to 16 extensions.

Dec 19, 2014 | NEC Lands Phones

1 Answer

NEC Electra Elite IPK B64-U20 KSU


I have a PRI and am asking the same question. I do know that you do have to go into programming to set this up. You also have to have a COIB card installed for this to work for standard Direct Inward Dial lines.

Apr 18, 2013 | NEC Electra Professional ETW-16DC-2

1 Answer

Caller id now shows number instead of name (new provider)


This is something you could be walked through with tech support. They would need to know what type of system and what cards are in it, in order to program it. ldtsnj.com

Apr 22, 2009 | NEC Electra Elite 32D-1 Corded Phone

1 Answer

NEC Dterm 80 phones


Caller id would have to be truned on, in system programming, as long as the caller id card is installed. If it works for the corded phones and not the cordless phones than, the analog caller id feature needs to be programmed. check out ldtsnj.com

Apr 13, 2009 | NEC DTU 8D-2 Corded Phone

1 Answer

Would you be able to help me to program the directory button on our NEC Elite phone system so we could scroll back through caller ID for the last 50 calls?


You can pull the card out hot. The KMM chip is IC6 toward the connector at the back of the card. The other requirement, if you have the KMM chip, is that Caller ID be enabled for your MIFM card. It is done through system programming. You can turn it on by these key sequences. Follow this EXACTLY from a display phone (start idle): <Feature>, #0*8974, press <Line 7> button, press <Line 3> button, press *, 4,01, <Transfer><Speaker>. Test again. One other item, MIFM firmware 5.0 is required for 50 call storage. If firmware level is lower, you will only get 10 call storage. If all the above fails, you will need to call a certified NEC technician to check it out.

Dec 31, 2008 | NEC Electra Elite DTU 16D-2 Corded Phone

1 Answer

NEC Electra Professional Level I Upgrade


The NEC Electra Professional Level 1 has a maximum CO line capacity of 8 in any configuration. If you need more outside phone lines, you will need a different system. If you need to limit cost as much as possible, the cheapest avenue would be to upgrade to a used Electra Professional Level II. That way you can still use the same telephone instruments, but ALL cabinet hardware would be different. Also, you can only get to 8 outside lines if you have software level 3.00 or higher by using the COI-C(2A)-10 card. To verify which software version you have, I think you press FNC(3) on sta. 10 ( or the first station in the system). If that doesn't work, let me know, and we can access the system program to verify version number.

Dec 29, 2008 | NEC Electra Professional ETW-16DC-2

3 Answers

I have sixteen button NEC Electra ELite Multiline Telephones in my office-


Here's how you adjust the time:

1. Press <TRANSFER>
2. Press <CONF>
3. Press *
4. Press <TRANSFER>
5. Press <CONF>
6. Press #
7. "CAT MODE" displayed on LCD
8. Press <REDIAL or LNR/SPD>
9. "COMMAND" displayed on LCD
10. Press 02
11. Press <RECALL>
12. Press 2
13. Press <RECALL>
14. "02>2>Current Time" displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press <CONF>

Nov 13, 2007 | NEC Electra Elite DTU 16D-2 Corded Phone

Not finding what you are looking for?
NEC Electra Elite DTU 16D-2 Corded Phone Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...