Question about Car Audio & Video

1 Answer

Missing Yellow Adaptor

My son uses this adaptor and now the part that goes into the computer is missing it fits on the end and is yellow and it is put into the computer for using Is it possible to receive one of these I did go into a sourse store but they did not have any I am sorry but my son is on Ontario Disability and I now this is one out for him to do and that is to use his computer It is too explensive for him or myself to reby another one of these adaptors I am 75 years old and on a very fixed income and of course my son is on a veyr small allowance form the ontario Disability so he canno tafford to go out and buy another one that could cost anywhere from60.00 up I look forward to hearing from you and thank you for your time and effort Yours truly Sylvia James

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Car Audio & ... Master
  • 75,807 Answers

Sorry we do not sell products of any kind here.

Posted on Mar 21, 2017

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Using an external mp3 player on my JVC KD-LX111

You could try using an FM transmitter which plugs into the earphone jack on your Mp3 player, then all you have to do is tune the radio to pick up the transmitters frequency.

Posted on Apr 18, 2008

Benimur
  • 6966 Answers

SOURCE: Car lost presets on ignition

Hi and welcome to FixYa,

Let's start with the basics:

  • yellow wire to an always on B+12;
  • red to ACC terminal of IGN switch;
  • black to ground;
The yellow/always on is responsible for keeping the memory, that is the stations that you have had memorized/selected. The always on is directly connected to the battery's + terminal.

Would appreciate any updates. Good luck and thank you for using FixYa.

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: I lost my adaptor for the recever of my radio

I am no way affiliated, but I get my car audio from Crutchfield and they have a HUGE range of adapters that come gratis with car audio purchase. However, you can get these adapters separately as I did when installing my wife's car audio. www.crutchfield.com.

Posted on Apr 09, 2009

  • 1 Answer

SOURCE: Adding an Auxiliary Adaptor to a Matsushita Car Radio Receiver

need wiring diagram for a MR 587268

Posted on Sep 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect my Xbox 360 to my Samsung plano TV with rc cables


If you have the RCA adaptor for your Xbox it should have three plugs yellow red white
Yellow goes to the video RCA on the TV
Red goes the the audio in right
White goes to the audio in left

Apr 09, 2016 | Video Game Consoles & Games

1 Answer

I am unable to access broadband , YAHOO or INTERNET EXPLORER. WHAT IS THE MAGIC WORD / ACTION


make sure that your drivers are installed for your ethernet adaptor weather it be wired or wireless.to check in win xp go to start/control panel/system/hardware then device manager and see if your network adaptor is there and if is green icon/normal or if it has a yellow ? on it.in vista and win 7 goto start/control panel/system/device manager and check network adaptors there different icon but the yellow ? still applies.hope this helps.
p.s if your drivers are not installed or are missing goto the motherboard manufactuers website and search and download and install.the msi site is www.msi.com.tw

Oct 13, 2010 | Computers & Internet

1 Answer

When hooked up led 46" aquos it is black and white


You must only connect a yellow to a yellow a green to a green and etc. You must have a yellow cable going into a green hole. You need an adaptor. The adaptor goes into input 2. The other side of the adaptor is a yellow red and white male cable that will fit into your device.

Sep 28, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Need help please help me out I DONT SEE NO LANCARD ADATORS IN NETWORK ADAPTOR UNDER DEVICE MANAGER IN PROPERTIES OF COMPUTER NOR IS THERE ANY YELLOW MARK WHICH STATS THAT ANY DRIVER IS MISSING


- Check the LAN card if properly inserted to the PCI slot of the computer
- If you a yellow mark under device manager, you'll needing to install the driver of the adapter.
- Check for the latest update driver of the adapter.

- There are two ways to install the driver:

*Install the driver using the wizard.

*Force install the driver by right clicking on the icon that has the yellow mark and click update driver.

Note: There are compatibility issue for operating system and driver using any adapters.

Mar 03, 2009 | Computers & Internet

1 Answer

PSP power cord does not fit into socket


before trying to replace the yellow socket try this first.got this same problem before.when i remove my charger before the yellow plastic ring was left stuck inside the socket.so when i buy a new adaptor it doesnt fit to the yellow socket anymore,so what i did is i use a piece of pin,bend the end point little bit and try lifting that yellow plastic ring inside.when i finally remove it the new adaptor fits again like nothing happens.try this first.if your willing to change it i will give you the complete instruction on how to replace it.hope this one fix your prob.

Jan 06, 2009 | Sony PlayStation Portable (PSP) Console

1 Answer

Xbox 360 adapter


The flashing yellow light on the Power adaptor points to a potential failure with the power adaptor. Usually when the adaptor is idle their is a solid yellow light, A red light for a total failure and a green light for on.

A YEllow flashing light would indicate that there could be potential problems with the adaptor overheating and/or being faulty. where is the adaptor located ? just like the console itself. they are prone to overheating and collect dust very easily.

i would suggest moving the adaptor into an area with a large opening to allow the flow of air to keep it cool, also i would attempt to remove any dust inside.

Try doing this and if the problem persists, let me know

Oct 25, 2008 | Microsoft Xbox 360 Console

1 Answer

I have a phillips 26pf5520d/10 model number, ive connected a dvi cable and hdmi cable to my playstation 3 and tv, but i have no sound, please any ideas. many thanks steph


I'm assuming you mean you have HDMI coming out of the PS3 and going in to the DVI port on the back of the TV, via an adaptor or cable with a different connector on either end.
I have the same TV, you need a separate audio connection between ps3 and tv. HDMI can transmit audio and video but DVI (which is what the TV has) can only do video.
You'll need a 2 x phono female to 3.5mm jack male adaptor cable. like this one to make the audio connection.
you could also try this adaptor but its a bit big and therefore may not fit into the space available.
after getting an adaptor do this (keep your original setup the same)
1. Put the ps3 AV cable into the back of the ps3. 2. then connect the red and white plugs (ignore the yellow) from the ps3 AV into the adaptor (discussed above). 3. then connect the 3.5mm jack (from the adaptor) into the small audio port right next to the DVI port on the back of the TV (I believe its called 'DVI Audio')
I've not tried this and I don't have a ps3, yet, but in theory it should work, as long as the ps3 will send audio to the av output at the same time as to the hdmi output.
if it works, then post a response, i'd like to know for the future.
good luck

Aug 01, 2008 | Televison & Video

1 Answer

After installing cd and following directions to install my Linksys wpm300n wireless-n pci adaptor the directions say to power down pc,installcard hookup antenna and re power up pc.but i get no futher set...


Click on Start - right-click on my computer - click on properties - click on hardware - click Device Manager

Look for your wireless adaptor in the list. Probably under Network adaptors. If it is on the list and there are no yellow question marks or Exclamation points next to it then you have successfully installed the device.

If there is an item that says unknown communication device with a yellow question mark next to it (?), put the set up disk back in and reinstall.

Most of the time when you install a new device in a pci slot, you must install the device physically in the computer first before running setup.

May 03, 2008 | Computers & Internet

1 Answer

Harmon/kardon computer speakers bought on ebay missing power adaptor


Get the speakers with you walk a distance for your Nearest electrical shop as quickly as possible and your roblems will be solved...

Jan 03, 2008 | Harman Kardon HK206 Computer Speakers

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4848 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...