Question about Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg

Open Question

GE Mac1200 EKG Machine can't print send or delete from the storage program,,

After we access the storage program (pressing the up/store/retrieve buttons simultaneously), high lighting print, send, delete or change doesn't do anything but kick us back to the main screen

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: EKG Machine

3 lead machines are designed to monitor the cardiac rhythm cycle, in 3 of the 12 primary leads. An attempt to use this limited information as a true diagnostic tool would be incomplete and perhaps misleading.

A full 12-lead machine is diagnostic, and looks at the elecrical information from all sides ("walls", ie anterior, septal, inferior, lateral, posterior) of the heart and gives detailed information regarding ischemia and or infarction of the cardiac muscle, electrical conduction system function, electrical axis, chamber enlargement, drug effects, and more.

Hope this helps.

Posted on May 08, 2009

  • 71 Answers

SOURCE: Unable to open the battery compartment on my GE Mac1200 ECG

The little tab at the right side needs to be pried up with a screw driver so that is can slide freely.

Posted on Jun 03, 2009

  • 71 Answers

SOURCE: GE MAC1000ekg not printing clearly

The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Posted on Jan 01, 2010

  • 157 Answers

SOURCE: We have a GE MAC1200 EKG that will only print

The battery is weak. Disconnect the AC, battery,& then replace the memory battery. Reconnect the power battery & AC. Next is a pain in the rear, reprogram the unit; date, ID, setup, ect.

Posted on May 14, 2010

johnhakim
  • 2 Answers

SOURCE: Our MAC 1200 ekg machine

my mach 1200 does not have "operating mode" or start at queue mark.
not helpful for me.

Posted on Oct 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I print out a stored ECG on the MAC 1200? After I choose the ECG, select 'Print' and press 'Enter' I get taken back to the ECG screen. Please Help!


Hi,

- Go to the storage program by pressing "Shift" + "Store/retrieve" simultaneously.
- using the down arrow, move the cursor to the space where your ECG's are listed and underline the ECG you wish to re-print.
- Once the ECG is underlined, press "Shift" + "down arrow" simultaneously. Two little cursors will state that the ECG is selected.
- Press "Enter". The cursor will come back on top of the screen, on "Print".
- Press "Enter" again. The machine will start to print.

I hope this helps !

Fel

Nov 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

Our MAC 1200 ekg machine prints out 1 empty sheet prior to printing the actual ekg. Is there a way to eliminate that first page? It wastes a ton of paper. thanks, Dan


hi,


1.Press the setup Button
2.Select operating mode and press enter.
3. Repatedly perss the down arrow until it reaches to the "START AT QUEUE MARK" and perss enter. Then select NO and press enter ( if it is selected Yes then before each recording the recorder advance the paper to the beginning of the next page)
4. Press the Start button to exit the setup.
From the next EKG it will print from the first page.
ok

Aug 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

How to delete ekg? 440 960 6146


hi,
Do the following for deleting items in memory.
Press and hold downajin_g_12.gif button and press store /retrieve button

You will see the memory program as follows

ajin_g_13.gif

The first line reffers all the stored

Else shows individual ecg in memory ( by name or by date)
To delete all ecgs select delete and press ajin_g_14.gif button
If you want to delete one by one then select the ecg recording which you want to delete and press ajin_g_15.gif
ok

Jul 11, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

I can not figure out how to delete ECGs stored on my MAC1200, I am getting a message stating I am low on memory


hi,
do the following for deleting items in memory.
Press and hold downajin_g_12.gif button and press store /retrieve button

u will see the memory program as follows

ajin_g_13.gif

the first line reffers all the stored

else shows individual ecg in memory ( by name or by date)
to delete all ecgs sect delete and press ajin_g_14.gif button
if u want to delete one by one then select the ecg recording and press ajin_g_15.gif
ok

Jan 07, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

We have a GE MAC1200 EKG that will only print once. The unit gets stuck (will not print - just continues to analyze) when a 2nd ekg is attempted to be printed. If the the unit is unplugged, then the unit...


The battery is weak. Disconnect the AC, battery,& then replace the memory battery. Reconnect the power battery & AC. Next is a pain in the rear, reprogram the unit; date, ID, setup, ect.

Apr 19, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

Mac 1200 battery


I am not sure what you are referring to . Do you need just the connecter that is attached to the battery pack? I can provide almost anything for the mac1200. Please let me know.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Dec 27, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

Unable to open the battery compartment on my GE Mac1200 ECG


The little tab at the right side needs to be pried up with a screw driver so that is can slide freely.

May 28, 2009 | Ge Medical Systems Ge Healthcare Mac 1200...

2 Answers

HOW DO I SEND A FAX ON THE BROTHER MFC-5440CN? LOST MY MANUAL


To send a fax, you will have to configure the settings. here are the steps you can follow;

Remote Fax Options;
You can only use one remote fax option at a time:
Fax Forwarding—OR—Paging—OR—Fax Storage—OR—PC FAX Receive—OR—Off.
You can change your selection at any time (Menu/Set, 2, 5, 1).

Setting up Fax Forwarding

When you select Fax Forward, your MFC stores the received fax in the memory. The MFC will then dial the fax number you’ve programmed and forwards the fax message.
  1. Press "Menu/Set, 2, 5, 1".
  2. Press ▲ or ▼ to select "Fax Forward". Press "Menu/Set". The LCD will ask you to enter the fax number to which faxes will be forwarded.
  3. Enter the forwarding number (up to 20 digits). Press "Menu/Set".
  4. Press ▲ or ▼ to select "Backup Print:On or Backup Print:Off". Press "Menu/Set".
If you select "Backup Print:On", the MFC will also print the fax at your MFC so you will have a copy if there is a power failure before it is forwarded.
5. Press "Stop/Exit".

Programming your pager number When Paging is selected, your MFC dials the pager number you’ve
programmed, and then dials your Personal Identification Number (PIN). This activates your pager so you will know that you have a fax
message in the memory.
1. Press Menu/Set, 2, 5, 1.
2. Press ▲ or ▼ to select Paging.
3 . Enter your pager phone number
followed by # # (up to 20 digits). Press Menu/Set.
Do not include the area code if it is the same as that of your MFC. For example, press 1 8 0 0 5 5 5 1 2 3 4 # #.
4. If your pager needs a PIN, enter the PIN, press #, press Redial/Pause, enter your fax number followed by # #. Press Menu/Set. (For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5
1 2 1 2 # #) —OR— If you do not need a PIN, press Redial/Pause, enter your fax number followed by # #. Press Menu/Set. (For example, press Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
5. Press Stop/Exit.
■ You cannot change a Paging number or PIN remotely.
■ If you have set Paging, a backup copy of the received fax will
automatically be printed at the MFC.

Setting Fax Storage
If you select Fax Storage, your MFC stores the received fax in the
memory. You will be able to retrieve fax messages from another
location using the Remote Retrieval commands.
1 Press Menu/Set, 2, 5, 1.
2 Press ▲ or ▼ to select
Fax Storage.
Press Menu/Set.
3 Press Stop/Exit.
Setting PC Fax Receive
If you select PC Fax Receive, your MFC will temporarily store your
received fax messages in its memory, and then automatically send
the faxes to the PC. You can then use your PC to view and store
these faxes.
1 Press Menu/Set, 2, 5, 1.
2 Press ▲ or ▼ to select
PC Fax Receive.
Press Menu/Set.
3 Press ▲ or ▼ to select
Backup Print:On or
Backup Print:Off.
Press Menu/Set.
4 Press Stop/Exit.
If you have turned on Fax Storage, a backup copy will
automatically be printed at the MFC.
  • Before you can set up PC Fax Receive you must install the
MFL-Pro Suite software on your PC, make sure your PC is connected and turned on. (For details, see Using Brother PC-FAX software on page 5-1 in Software User’s Guide on
the CD-ROM.)
  • If you select Backup Print:On, the MFC will also print the fax at your MFC so you will have a copy if there is a power failure before it is sent to the PC.
■ If you get an error message and the MFC cannot print the faxes in memory, you can use this setting to transfer your faxes to your PC.
Turning off Remote Fax Options If you set the Remote Fax Options to Off and there are faxes in your MFC’s memory, the LCD will give you two options.
  • If you press 1, all unprinted faxes will be printed and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
  • If you press 2, the memory will not be erased and the setting will be unchanged.
Setting your Remote Access Code

The remote access code lets you access the Remote Retrieval features when you are away from your MFC. Before you use the remote access and retrieval features, you have to set up your own code. The default code is inactive code (--- ).
  1. Press Menu/Set, 2, 5, 2.
  2. Enter a three-digit code using numbers 0-9 or . Press Menu/Set. (The preset ‘ ’ cannot be changed.)
  3. Press Stop/Exit. Do not use the same code which is set in your Fax Receive Code ( 51) or Telephone Answer Code (#51). You can change your code at any time by entering a new one.
  4. If you want to make your code inactive, press Stop/Exit in Step 2 to restore the inactive setting (--- *).

Apr 22, 2009 | Office Equipment & Supplies

Not finding what you are looking for?
Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ge Medical Systems Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Steven Clarke
Steven Clarke

Level 2 Expert

222 Answers

ka4iup
ka4iup

Level 3 Expert

3957 Answers

Are you a Ge Medical Systems Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...