Question about Philips Televison & Video

Open Question

How do I get all of the channels back?

I am not familiar with this TV as it is one in a common room at my school. It does not have a remote. It has a power button in front and four buttons on top for changing channels and volume. I got frustrated with the TV because the menu kept popping up when I was changing channels. Somehow in my frustration, I hit something that caused it to lose most of it's channels. We only have 20 now and previously had 60. I tried to switch back to cable, but it doesn't help and actually gets rid of most of the channels we have by just being on the antenna option. Any ideas how to fix this? I'm very frustrated that I cannot watch the shows I like anymore.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

unclejed
  • 26 Answers

SOURCE: pop up box appears periodically

try bringing up the menu, and see if there's an option "factory default", and try that. you didn't mention what button on the remote you press to get rid of the popup, or what feature you are turning off to get rid of the popup,

Posted on Jun 28, 2006

ronpar
  • 27 Answers

SOURCE: Tv not responding to remote and now will not turn back on!

if the remote eye on the tv it will do all kinds of strange stuff once the eye on tv gets dirty the the tv will shut off after 2 seconds try cleaning it and see what happens the eye on tv is hard toget to so get a can of air to blow it out i took my pocket knife to clean mine i know that was ruff on eye but thats all i had if this dont work try unpluging your control board on front of set board may be bad or buttons are stuck email me at rjp5765@msn.com if this helps

Posted on Dec 06, 2007

  • 3 Answers

SOURCE: Wharfedale LCD3210AF Television- Digital problems!

I would imagine that the Digital PCB is faulty.

Posted on Feb 12, 2008

MikeMaierTV
  • 206 Answers

SOURCE: TV Snow and Static Sound

Sound like its all cabled wrong So its from the source, (wall satalight Whatever ) to VCR in then VCR out to TV, Now when the VCR fires up it tunes the RF output to Chanel 4 and has a strong signal, that over rides just about every thing. Simply way to stop this is one of two ways, press the TV/VCR button on the VCR, or simply turn off the VCR to let the signal pass through.

Posted on Mar 06, 2008

  • 51 Answers

SOURCE: TV input

it is likely that your tv is interpreting a random button on your remote as a signal sent for it to change inputs, next time this happens turn the tv off and back on and note what comes up on the screen, for example video 1,

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a small magnavox HDTV. I unplugged it to watch it in another room. The next day when I moved it back into the living room I turned it on. Every time I try changing the channel it changes the source...


Is it a multi-function remote? If it is, make sure you've punched the TV button before using it. Also, make sure none of the buttons on the remote or the TV have accidentally been pushed down and are stuck.

Jul 05, 2011 | Philips Televison & Video

1 Answer

I have one receiver in my living room. The living room tv is on the #1 channel and the kitchen, guest bedroom and master bedroom tv's are on channel #2. All remotes were working just fine and suddenly...


Hello! On the back of your receiver box you'll see a silver UHF antennae make sure its pointing straight up. If that fails try the steps in this link
http://www.dishnetwork.com/SupportSection/remote-setup
Daniel Busa
DISH Network Customer Service

Jan 04, 2011 | Universal Remote Control DISH Network...

1 Answer

I chose the wrong channel on remote it took me to a Dish site whcih I chose to exit - when I did that my picture totally disappeared - could not get it back. It is fine on my other tvs - so I need to get...


Guest

Are you getting a snowy/blue/black screen on your TV? To get your picture back, you need to get the TV back to the correct channel or input. If the receiver is in the same room as this TV, the TV should be on channel 3/4 (normally 3) or an input setting depending on the TV. TV 2 (away from receiver) would be on channel 60/73. If you have the TV remote, put the TV on one of those channels. If you get a picture when the TV is placed on the correct channel, press and release the SAT button. This puts the remote back in SAT mode and will now operate the receiver.

If you don't have a picture, unplug the receiver for 10 seconds from the electrical outlet and plug back in. This will cause the receiver to reboot and re-acquire Satellite signal. i hope this helps.

Ray Calo
DISH Network

Jun 30, 2010 | DISH Network IR Remote Control

1 Answer

Changes channels by itself and turns off and on


Believe it or not, most common problem is dirty, faulty remote. Remove remote from room, if TV still does it, unplug TV, push and release power and volume buttons multiple times each and wiggle while doing. Try letting them "pop" out after you push in. You may be able to feel a "bad" one. Plug back in and do each several more times. If no difference, problem is internal circuitry (very rare).
Ghost or someone/neighbor playing games(must be very close)

Sep 26, 2009 | RCA TruFlat 27F520T 27" TV

2 Answers

The two TV are synced. Do I unconnect them? I have one TV in the living room, one TV in the bedroom. Whenever the TV in the bedroom is on, it is on whatever channel is on in the living room. Both remotes...


If you have a dual tuner it is in sigle mode. Go to the front panel on the receiver and press the mode button. This may be behind a push open door based on the receiver you have. If this does not work let me know. Thanks for using Fix Ya.

Aug 15, 2009 | DISH Network IR Remote Control

2 Answers

Universal remote works for basics but won't change input


Rich,

good day , what button can you see infront of your TV screen?

Not familiar with this model but if you'll manage to locate a button marked as "TV/AV" or "AV" press this button until it the display switch to A/V mode (audio/video). Or if this is a really old model, from Tuner mode or channel model. set the channel station to 1 then press the " - channel " button and see if it will change from tuner mode to A/V mode

cheers,
mark

Jan 31, 2009 | Toshiba 32A33 32" TV

1 Answer

Soundcast act 211 wireless audio system wireless interference w/airport


I'm not familiar with this product but my guess would be that the wireless signal from the audio transmitter is either overriding the wireless in your room.

You might want to consider going to a bluetooth system. It's range is only 30 ft and it doesn't impact wi-fi equipment.

Aug 21, 2008 | Digital Media Syndicate Soundcast...

3 Answers

Toshiba Remote CT-877 problem


I contacted Toshiba. Take out the batteries. Press every button on the remote. But the batteries back in. The remote will work because you just reset it.

Jan 10, 2008 | Jensen SC-340A Remote Control

1 Answer

TV won't come on!


your system control section has failed due to sudden power failure. 1please check power to system cotrol. 2check tunning &aft ckt in system. 3check memory ic & its section 4check system ic & its section regards

Sep 12, 2007 | RCA F32650 32" TV

1 Answer

Re: Can't change from Video


You will need the remote to do this. If you can't find the remote get a universal remote with a video or input button on it. The other set may not be the same model and has different features.

Sep 06, 2007 | Sanyo DS13204 TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...