Question about Dacor CM24T-1 Coffee Maker

3 Answers

Can the illumask be reset after 30 uses - Dacor CM24T-1 Coffee Maker

Posted by Anonymous on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can reset the illumask to last a lifetime once and for all. E-mail me at if you are interested. Nick

Posted on Apr 21, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I think that it's with a copper wire

Posted on Jan 18, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found a review made on Amazon where someone has figured how to reset it; this means less money spent AND less landfill waste! I have not tried to reset it yet, so I do not know if this actually works, but I plan on trying it in about a week. Here are the steps:

1. Open the unit, and replace the four AA batteries.
2. Connect a wire between the POSITIVE terminal and the labeled RESET copper pad on the printed circuit board. Press the POWER ON button.
3. Move the wire to connect the POSITIVE terminal and the labeled TEST copper pad on the printed circuit board, and press the POWER ON button.
4. The counter will reset from 0 to 30 uses.

The only step that confuses me is 2, when it says connect "A" wire, do they mean connect THE wire? I'll have my dad try to reset it haha

Posted on May 12, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I change my "Username and Password"?

If you have forgotten your username and password, depending upon the BRAND and MODEL of your router, there should be a reset button. Use of this reset button will return your router to FACTORY DEFAULTS, eliminating ALL SETTINGS you have made to it, and allowing you to set a new USERNAME and PASSWORD.
Use of this reset button is referred to as a "30-30-30" reset. This means that you power the unit up, hold the reset button for 30 seconds, release the button, unplug the router, hold the reset button for 30 seconds again, keep holding the button while you plug the power back in, hold the button for 30 seconds after plugging the router back in, then release the button. When the router self-restarts, again unplug the router, wait 30 seconds, then plug it back in. The router should then be back to factory defaults, and you may start fresh with it.

May 12, 2015 | Computers & Internet

1 Answer

How to reset admin user password or get it from config file shown in it as hash

I have encountered other stubborn IP devices which resist reset.
Most of them will reset if one uses the 30 30 30 method.
Try it, press the reset button in for the following.
30 seconds with the power on, still pressing it in remove power and count another 30 seconds, now re-power it on still with it press for the last 30 seconds.
I have found that this time can be shortened for some devices but the cycle still is reruired. Good luck...

Jul 27, 2014 | Allied Telesyn Managed Switch 8 Port...

1 Answer

Reset button location

To perform a hard router reset, keep the router powered on. Then, find the unit's reset button, often located on the rear of the device. Use a pen tip or bent paperclip if necessary to depress the button and hold it down. Network administrators are taught to hold the button down for 30 seconds; your router probably does not require waiting that full length of time, but this is a good general rule to follow. After releasing the hard reset button, a router may need up to 1 minute to reboot and resume normal operation.
An alternative method for hard resets involves holding the reset button down for 90 seconds instead of 30, unplugging the router from power and then re-plugging it partway through as described in these instructions for the 30-30-30 hard reset rule. This more involved reset process may not work on some routers and should only be tried if the basic 30 second version does not work.
To avoid Internet connectivity complications, disconnect the broadband modem from the router before performing hard resets.

Mar 01, 2014 | Computers & Internet

1 Answer

Service repair manual

There is sort of a universal reset for routers known as 30/30/30.

The trick to this fix is to KEEP HOLDING the reset button in the ENTIRE TIME. Do not release button until ALL steps are done.

Make sure the router is plugged in and ON. Press and hold the reset button in for 30 seconds. UNPLUG from wall (keep holding button in) and wait ANOTHER 30 seconds of hold time. PLUG BACK IN and continue to hold button in ANOTHER 30 seconds. Then release.

The link below is to an article I found on Google, you probably don't need it too, but is included for further clarity.
The 30 30 30 Hard Reset Rule for Routers

Feb 27, 2014 | Belkin Connect N150 Wireless N Router

1 Answer

User name and

reset the router by doing what is called a 30/30/30 reset. Hold the reset button on the back (with a paperclip or whatever) for 30 seconds, then while still holding the reset button, unplug the router for 30 seconds, then while again still holding the reset button, plug the router back in. This will reset the router to it's default settings.
Next, look up the user manual for the specific router and figure out what the default user name and password is. Use this, along with the admin controls to set up the router, following the directions that should be in the documentation for the router. (ie, in a web browser enter into the address field to dial into the router.)

Jan 31, 2014 | Computers & Internet

1 Answer

I need to access my NetgearN150 from a command prompt as the GUI is not working can someone tell me if there are telnet or ssh commands available for this unit? The following lists the systems I am...

I think if you're using stock firmware you might be out of luck using ssh.
Still try telnet. (telnet IP address) if it was enabled before on the router (disabled by default.) If you have Win 7 you have to enable telnet in "Programs and Features/Turn Windows features on or off".
Find more info here.
Anyways - I would first try a 30-30-30 reset.
  1. Hold reset button for 30 sec.
  2. pull power whilst holding the reset button for another 30 sec.
  3. plug in power and keep the reset button holding for an additional 30 sec.
Let me know how that goes.

Aug 13, 2013 | NetGear Computers & Internet

1 Answer

I am wanting to reset my username on my linksys wrt54g wireless router and am not sure how to do it. I understand that I need to push a paperclip in the back of the router but what do I need to do with...

If you are resetting because you forgot the username and want to reset the router to factory defaults(you would have to reconfigure your router completely), you should use a 30-30-30 reset. This is done buy holding the reset button for 30 seconds, while still holding the reset button unplug the power cord for 30 sec, while still holding the reset button plug the power back and keep holding for another 30 sec. In short you hold the reset button for a total of 90 sec and have the unit unplugged in the middle of that time for 30 secs. Or you can simply try holding the reset button for 30 sec and see if the defaults (admin) are now working or not. As for the computer, it does not have to be off, I actually prefer keeping it on because you can test the router connection right away.

Jul 15, 2011 | Linksys Wireless-G Broadband Router

1 Answer

When i used a yahoo messenger,every 30 minutes is already authomatically off,,then after a minute automatically sign in.

If you using modem+router, the device reseting the connection each 30 minutes or if you using internet through LAN, may be your network admin using the Firewall soft which reseting connection every 30 minutes, or your ISP reseting the connection each 30 minutes automatically for IP changing purpose...Not a can be anxious....Good luck

Oct 26, 2009 | Yahoo Messenger

2 Answers

How do i reset the Netgear EN106tp to factory setting?

Hubs don't have any settings to reset. If it's a router, try the "30-30-30 reset." Get a pen, and hold down the reset button 30 seconds while the router is still plugged in. While still holding down the reset button, unplug the power, hold down another 30 seconds, then plug it back in, and hold down the reset another 30 seconds. The reset button is a small black button that you'll need a pen to push.

Sep 30, 2009 | NetGear EN106TP Networking Hub

2 Answers

Cant find password

And if you don't have the default password, use a site such as this to find it:

Aug 25, 2009 | NetGear WNR2000 Wireless Router

Not finding what you are looking for?
Dacor CM24T-1 Coffee Maker Logo

2,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Coffee Makers & Espresso Machines Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Tom Chichester

Level 3 Expert

34193 Answers

Are you a Dacor Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides