Question about Singer 3116 Simple

Open Question

Fix sewing machine.com

Needle with long thread don't break thread but comes unthreaded how can needle come unthreaded without breaking thread

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: The serger is not sewing

The machine was threaded incorrectly at first, but after changing the needle I was threading it correctly. The problem ended up being the needle depth. When I inserted the new needle, I did not have pushed up into it's slot quite far enough. I pushed it up all the way and retightened the screw. Now it is serging like a dream!

Posted on Apr 18, 2008

Ad
MarkDay
  • 111 Answers

SOURCE: The needle thread is blocked

Threading instructions for similar brother model:

http://www.mastersewusa.com/masmag11901_files/b114_471_721_771_XL711S_info_tg.htm

Possibly lever is to keep bobbin in place? If so, should slide left/right over top of bobbin.

Posted on May 14, 2008

madelinesalo
  • 59 Answers

SOURCE: We have a Delta sewing machine.With luck it may

the problem of your machine is the bobbin. fix it in her right position.

Posted on Mar 27, 2010

hazelgrace
  • 340 Answers

SOURCE: free Singer 185K manual The thread breaks most of

http://www.sewingonline.co.uk/instructions/singer185k/

Posted on Aug 23, 2010

SOURCE: my needle keeps coming unthreaded when sewing

normally when you use longer thread tails of 4 to 6 inches and move
the thread tails behind the needle before starting to sew.

Posted on Mar 07, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does top thread keep breaking?


Sounds like your tensions, both upper and lower are out of whack. Easily fixed if so...google a vidyfor your make/model machine on adjusting both upper and lower tensions.

Jun 18, 2017 | Sewing Machines

1 Answer

My needle thread doesn't break, but when I go to sew, it unthreads itself.


make sure to keep long thread tail for the top & bobbin
of 4 to 6 inches & pulled behind the needle

Aug 04, 2012 | Kenmore 15516 Mechanical Sewing Machine

1 Answer

My thread uptake lever keeps coming unthreaded. It causes stitches to be skipped and eventually the thread breaks. I have adjusted the tension, it doesn't help.


take up lever--try putting some tape on it to see if that will stop the thread from coming off.
also change the needle--make sure is the correct one for the fabric

Apr 14, 2012 | New Home Sewing Machines

2 Answers

Why does the 4th thread keeps breaking on my serger? I've re-threadedi it a dozen times carefully following the diagram. What am I doing wrong?


Most likely it is either your tension on thay thread being too high, or the needle is too big for the project you are working. Lower that tension, use the next size up needle, and thay should fix it. Also, I STRONGLY suggest only using maxi-locks thread. They are more expensive than other serger threads, but they are always half-price at hancock... Any other thread I have tried using causes breakage, especially on the the lower looper (the 4th thread). Although, of you keep the tension low-below 3 or so, you should be ok. If these tips don't help, I would also check your cutting width, if your machine has an adjustable one. If it is leaving too much gabric to the right of the needles, out is conceivable that this is putting too much pressure on the threads. Let me know if this helps!

Jun 23, 2011 | Simplicity Sewing Machines

1 Answer

The lower looper keeps breaking thread


Hi,...if the lower looper thread is breaking before you sew six inches or more then I suspect a threading problem.When the lower looper thread breaks, You MUST unthread the needles before you thread the lower looper. Thread the looper and then rethread the needles.

Hope that helps,
Doug

Aug 05, 2010 | Simplicity Serge Pro SW432 Mechanical...

1 Answer

NEEDLE KEEPS COMING UNTHREADED WILL NOT CATCH IN FABRIC


Make sure you are threading the machine correctly and it has the proper tension. Also check the bobbin the thread has to go thru the little lash

May 27, 2009 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

Sewing machine either breaks thread or comes unthreaded every time i try to sew.


Your threading is not right, totally remove your thread and rethread according to the manual directions and dvd. If, you still have problems call Singer at 1-800-4singer

Sep 29, 2008 | Singer 3116 Simple

1 Answer

My thread often becomes unthreaded from the part that raises and lowers the needle causing the thread and fabric to jam up


Your needle should not come unthreaded in the middle of sewing.. if it does, it is because the thread breaks. this can be a simple tension problem or brittle thread.

if you are talking about at the beginning of sewing that the needle comes unthreaded, then you should just pull out 6-8 inches of thread through the needle before putting your fabric under and begin sewing.

i hop that helps.

Apr 16, 2008 | Singer Featherweight 132Q Mechanical...

1 Answer

Lower looper


It is impossible for a looper to come unthreaded if you are holding one end and the other is still feeding off the spool. Somewhere a thread broke - must be either the upper looper or the needle. Try completely re-threading your machine. Many machines have an "order" they prefer to be threaded. Try starting from the right tension guide and work to the left.

Sep 17, 2007 | Janome MyLock 634D Mechanical Sewing...

Not finding what you are looking for?
Singer 3116 Simple Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Cindy Wells

Level 3 Expert

5184 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...