Question about Sanyo Washing Machines

Open Question

Sanyo washing machine

E2 displayed in screen

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 44 Answers

SOURCE: Error E2

A model number always helps when you're looking for help. ;)
I looked through about twenty manuals looking for an answer for you; I suggest that you'll have better luck if you have the model #.
Here's the link to the many, many, many Daewoo washer manuals.

WashingMachine&cpage=1">http://www.dwe.co.kr/english/support/download.asp?class1=5&class2=19&class3=0&selorderby=1&searchpath=WashingMachine=>WashingMachine&cpage=1

Good Luck!

Posted on Aug 08, 2009

Ad
  • 1 Answer

SOURCE: E2 error on homemaker washing machine.

I have an E2 error on the display of a homemaker washing machine model no HMWM8000. It will not pump out. The PCB does not have any visibly damaged components, which part is faulty, and how do i test a water level sensor.

Posted on Nov 08, 2009

6ylucy
  • 742 Answers

SOURCE: E2 error on homemaker washing machine.

get the manual at manualfox.com

Posted on Jun 18, 2010

  • 13 Answers

SOURCE: My washing machine is SANYO

mungkin

  • barangkali
  • agaknya
  • ')" onmouseout="ht(this)">perhaps pintu
  • daun pintu
  • laluan
  • ')" onmouseout="ht(this)">door
    tidak ditutup
  • tak bersalut
  • ')" onmouseout="ht(this)">uncoated
    dengan betul')" onmouseout="ht(this)">properly or penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    in pintu
  • daun pintu
  • laluan
  • ')" onmouseout="ht(this)">door
    gagal
  • kecewa
  • terkandas
  • ')" onmouseout="ht(this)">failed
    . menghubungkan
  • sambungkan
  • menyambung
  • ')" onmouseout="ht(this)">connect
    pendawaian')" onmouseout="ht(this)">wiring penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    with ( 2 dawai
  • wayar
  • kawat
  • ')" onmouseout="ht(this)">wire
    ) jika tiada
  • sekiranya tiada
  • sekiranya tidak
  • ')" onmouseout="ht(this)">if no
    dawai
  • wayar
  • kawat
  • ')" onmouseout="ht(this)">wire
    penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    menggunakan
  • penggunaan
  • gunakan
  • ')" onmouseout="ht(this)">use
    magnet
  • besi berani
  • batu berani
  • ')" onmouseout="ht(this)">magnet
    diletakkan pada')" onmouseout="ht(this)">placing at mengenai kawalan')" onmouseout="ht(this)">on control litar
  • lingkungan
  • peredaran
  • ')" onmouseout="ht(this)">circuit

    Posted on Nov 20, 2010

    ginko
    • 19396 Answers

    SOURCE: Toshiba auto washing machine model

    Hi.

    E2 is not an error code. It means that the Spin only mode has been started and that the cycle is now over.

    To reset the machine try disconnecting power (trip circuit breaker), connecting back, then hold down the Super Spin Dry button while you start the machine at the same time (press On while holding the other button). You should hear three beeps and the machine will be reset to initial settings.

    Posted on Feb 01, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    What does the fault code e2 mean?


    Kenmore e2 code Washing Machines Questions & Answers ...

    www.fixya.com > Forum > Tags > e2 code > Washing Machines
    Kenmore washing machines e2 code related questions and answers. Ask yourKenmore questions. Get free help from washing machine experts.

    Jul 26, 2015 | Washing Machines

    1 Answer

    I have a bwm 50 washing machine displaying e2


    The e2 error is a generic error that the machine shows if it's been overloaded or if the load becomes unbalanced during a wash cycle.

    To fix you must do a master reset of the washing machine.

    1. Close the door and make sure the dial is pointing to the "OFF" function
    2. Hold the Start/Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time.
    3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing after a minute of holding the button down however with my washing machine this didn't happen) (and neither with mine)
    4. Release the button and turn the dial back to the "Off" function.
    5. Select any program and the message should not be appearing

    Hope this helps
    Bob

    Jan 12, 2015 | Washing Machines

    1 Answer

    During washing cycle E2 alert alarm


    What is the make and model number of your unit?

    Feb 18, 2013 | Washing Machines

    1 Answer

    My washing machine is SANYO ASW-90WRTP. It cannot spin and showes E2 on the screen. I guess it means Error 2, but I don't know how to solve the problem. Thanks.


    mungkin
  • barangkali
  • agaknya
  • ')" onmouseout="ht(this)">perhaps
    pintu
  • daun pintu
  • laluan
  • ')" onmouseout="ht(this)">door
    tidak ditutup
  • tak bersalut
  • ')" onmouseout="ht(this)">uncoated
    dengan betul')" onmouseout="ht(this)">properly or penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    in pintu
  • daun pintu
  • laluan
  • ')" onmouseout="ht(this)">door
    gagal
  • kecewa
  • terkandas
  • ')" onmouseout="ht(this)">failed
    . menghubungkan
  • sambungkan
  • menyambung
  • ')" onmouseout="ht(this)">connect
    pendawaian')" onmouseout="ht(this)">wiring penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    with ( 2 dawai
  • wayar
  • kawat
  • ')" onmouseout="ht(this)">wire
    ) jika tiada
  • sekiranya tiada
  • sekiranya tidak
  • ')" onmouseout="ht(this)">if no
    dawai
  • wayar
  • kawat
  • ')" onmouseout="ht(this)">wire
    penapis
  • tapis
  • menapis
  • ')" onmouseout="ht(this)">censor
    menggunakan
  • penggunaan
  • gunakan
  • ')" onmouseout="ht(this)">use
    magnet
  • besi berani
  • batu berani
  • ')" onmouseout="ht(this)">magnet
    diletakkan pada')" onmouseout="ht(this)">placing at mengenai kawalan')" onmouseout="ht(this)">on control litar
  • lingkungan
  • peredaran
  • ')" onmouseout="ht(this)">circuit

    Nov 20, 2010 | Washing Machines

    2 Answers

    E2 error on homemaker washing machine. I have tried eveything including reducing load down to one item. It goes through the wash cycle OK, but will not drain, then eventually flashes the E2 error on its...


    I have an E2 error on the display of a homemaker washing machine model no HMWM8000. It will not pump out. The PCB does not have any visibly damaged components, which part is faulty, and how do i test a water level sensor.

    Sep 13, 2009 | Washing Machines

    5 Answers

    Telmann washing machine TEL6TL


    Telemann TEL6tl E2 Problem

    E2 on screen means the lid is not closing properly and thus not activating the (hidden) switch that prevents the machine from spinning while the lid is up.

    The lid switch in this model is not a direct contact switch between lid and switch , but it switches on and off due to a MAGNET embedded in the lid on the left hand side near the front. You will see a small indentation where the magnet SHOULD BE. My magnet had fallen off, so the lid could not activate the operation switch. I had lost the original magnet( about 1cm X 2cm) so glued another into place.

    Machine is now fully operational again, and the job cost .78c.

    If your magnet is still in place, the E2 fault could lay with the switch itself , which is fixed to the underside of the top casing of the machine near the front right hand side of the lid cavity. The switch measures 1cm X 3cm heavily black tape insulated. Access is gained by popping the 2 X2cm discs at front top of machine and releasing the 2 small philips screws here and a further 2 at the back top of machine. This operation of replacing the switch is best left to an electrician or washing machine specialist.

    Hope that helps

    Apostle95

    Nov 01, 2008 | Dishwashers

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sanyo Washing Machines Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Brad Brown

    Level 3 Expert

    15950 Answers

    Are you a Sanyo Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...