Question about Lanier Office Equipment & Supplies

1 Answer

Grinding noise LD016

Copier is making a gringing noise when it is turned on. There is a lot of toner leaking inside the machine and the copies have black marks on them.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Lanier Expert
  • 207 Answers

Lubricated the bushings on the black foam roller on the inside of the right hand door. Toner leakage is unrelated unless the drum unit gears are causing the noise, in which case, it must be replaced.

Posted on Dec 14, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 53 Answers

SOURCE: xerox 5305 copier excess toner

sounds like faulty drum cleaning blade,which is usually contained in the replacement drum module.I would be inclined to take the drum unit back where you got it (unless you replaced it with a second-hand one) 99% certain the problem is contained in that module

Posted on Feb 27, 2008

johnychel
  • 796 Answers

SOURCE: xerox grinding noise

the bearing on the motor or the rotating path must have damaged..

replace them

Posted on Jun 02, 2008

  • 10 Answers

SOURCE: GRINDING NOISE or PAPER JAM

If you are not a technical person best thing to do is to show it to an expert. grinding noise means some part in the machine is running with the friction. and might brake something or scratch something. Find out persons who work on photocopiers in your area either samsung or Xerox. as this model comes with both the companies and Xerox people are generly better than samsung people.

Posted on Jun 07, 2008

SHOGUN125
  • 58 Answers

SOURCE: Canon IR3100 CN making grinding noise

hi..there...you may visit canon website at internet..chose product support/dowlnload----find your product here and finally you can get and download manual book as pdf for free....good luck..

Posted on Feb 03, 2009

SOURCE: My Canon PC-25 copier is streaking

Toner cartridge is defective - replace it

Posted on Apr 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a new copier toner cartriage and the copier is making a grinding noise and poping. The copies skip parts of the copy. I have bought a second toner cartriage and it does the same thing. I put the...


make sure cartridge is fully installed and sitting properly. Sounds like gears are not meshing so check gears with cartridge out (bottom of copier) and see if they are damaged. If so, copier is junk.It might not be out of toner just can't read it properly as it is not seated proper.

Dec 22, 2010 | Canon PC-940 Black and White Copier

9 Answers

Weird noise no copies


does it intake the paper at least??

in some kind of problems paper alone rolls in and out with out copying.

is that the problem.
please clarify

Aug 11, 2008 | Sharp AL-1642CS Copier

2 Answers

Hi, My Toshiba E-Studio 3511 color copier has a error message of 'dispose of used toner.' Even if I followed the direction, the error message is still there and the copier can't work. Would you help me...


I am assuming you have emptied the old waste toner "box" and not replaced it with a new box. This is not a problem, just clarifying. If this is the case then you have toner packed into the sensor block which is telling the machine that the waste toner box is still full. Just look behind the waste toner box and look for a little set of wires. They lead to a small black sensor. Now look at the waste toner box where it mates up with the sensor. You will see a small square box area on the waste toner bottle. The sensor looks thru this block and if it is blocked with toner it will tell the machine the box is full. Just tap on the little block and make sure there is no toner in it and re-install the waste toner box and the indicator should go away.
Good Luck and Thank You for using Fixya.

Aug 11, 2010 | Toshiba E-Studio 3511 Color Copier

1 Answer

Noises on power-up.


emty waste toner and clean

Apr 22, 2010 | Sharp AL 1631 Copier

1 Answer

Canon imagerunner 1310 loud noise


Hello sir; I suggest reinstall drum unit again ,you will find out what's going on.

Apr 28, 2009 | Canon ImageRUNNER 1670F Copier

1 Answer

Gringing noise when printer boots up and when it prints


Probably worn gears for the rollers along the paper path or the gears that mesh with the imaging roller in the toner cartridge. Remove the toner cartridge and reseat it. Also look for any rounding of the gear teeth on any of the rollers while you have to cartridge out.

Mar 18, 2009 | Samsung CLP 300 Laser Printer

1 Answer

Noises when printing copies


Take the new cart. out and reinstall the old cart. Does the noise disappear? I would tap and shake the toner cart. BUT BE CAREFULL, the cart is ready to spill toner. On the box and in the instructions it tells you, or should, that you must shake and tap the outside of the cart. This is due to settling and the toner maybe packed. By tapping and shaking it will feel the toner. If the toner is packed it will put undue pressure on the augers inside the toner cart. and cause a grinding noise. If after tapping and shaking, reinstall the new cart. and check. If everything is ok -- great. If the noise remains contact the company your purchased the cart. from and ask for a replacement. These cart. are mass produced and mostly reused ( refurbed). Parts wear now and they do not replace the inside parts, they just repack with toner and seal.

Dec 25, 2008 | Sharp AL 1631 Copier

1 Answer

Sharp AL1642 CS Copier Grinding noise and Paper Jams


Loud clacking sound, jamming in fuser ? sounds like the gear that turns the fuser are bad and not meshing together,
accordion jam is the fingers or claws that ride on the fuser roller are probably worn out ( these can be replaced usually 3-5 ).

You can buy the parts and replace them yourself if a handy person, not that difficult.

Nov 19, 2008 | Sharp AL-1642CS Copier

1 Answer

Canon pc-6RE copier


check the drum for toner leaking, sounds like the drum blade.
the drum is a shiny cylinder inside the machine, open and and see if it has black rings

Jul 18, 2008 | Canon IMAGERUNNER 6570 Copier

1 Answer

Loud grinding noise Toshiba 1550


It is one of three problems,
1- the developper is starting to go bad, unfortunately with toshiba it is a common problem the seals go bad in the unit the gears are very hard to turn giving a loud grinding noise, although you can rebuild the unit by changing the seals, it's VERY messy and they don't always work ( after spending all that time cleaning and changing the seals and gears and it didn't work, I just started to change the DV unit.) Test by taking out and turning the gear by hand, if you need a plier to turn it, it's bad.
2-the toner itself is a problem, take out the toner and look at wherre it sits there is a gear that turns the toner to feed it in the machine, if it's dirty and has toner it will make noise, test by taking out toner and close machine, does it make the noise without it?
3- cleaning section where the drum is, this is what turns to feed excess toner into the small pastic container, aggravating but not a mechanical problem. And also check the fuser ( where it gets hot)

I think I've covered everything for that machine.

Good luck

Nov 30, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

Brad Brown

Level 3 Expert

15441 Answers

George Mclaughlin

Level 2 Expert

339 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...