Question about Bosch 13624 24V Cordless Hammer Drills

1 Answer

My 24v cordless drill is working ok but the switch on the side of drill for turning hammer on and off is missing. what spare parts do i need to get. would it just be the switch hopefully nothing else fell out

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 154 Answers

In order to switch from hammer to non hammer on the 13624 there is a ring on the clutch near the chuck. The button on the side is for switching from forward to reverse. The part number you will need is 2601099112. This is something that happens quite often on these drills and you may consider getting two. They are less that 5 dollars each.

Posted on Aug 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken drill bit stuck inside drill


if you open chuck all the way the drill bit should just fall out

Dec 11, 2013 | Bosch 13624 24V Cordless Hammer Drills

1 Answer

Bhp452 makita cordless drill smoking. how can i troubleshoot?


the switch or motor is wired incorrectly. These parts are polarity sensitive. The smoking I would assume is from the old switch and now the rotation is reversed. Let me know if you need more assistance.

Dec 10, 2011 | Makita 18 Volt Cordless Hammer Drill Kit ...

1 Answer

I HAVE A MODEL DW004 24V CORDLESS HAMMERDRILL THAT HAS STOPPED HAMMERING. IT ONLY RUNS IN DRILL MODE NO MATTER THE SWITCH POSITION. ANY IDEAS ON WHAT COULD BE WRONG. SWITCH APPEARS AND FEELS INTACT.


Hi!!

The hammerdrill function is set by the selector switch, the switch itself may look fine from the outside, but, if it is not switching functions, you should open the hammerdrill and check the switching mechanism, even if you don't have an idea of how it works, after a visual inspection to the switching mechanism, common sense will tell you what's wrong, it is actually pretty simple.

Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Mar 18, 2011 | Dewalt DC925 Cordless Drill

1 Answer

No hammer action


turn it to hammer,if it is the temp.has to be warm they don't work to great in the cold

Jan 13, 2011 | Bosch 13624 24V Cordless Hammer Drills

1 Answer

Bosch drill dosent work even when i charged it only used about three times


Hi , try and find proof of purchase ( receipt/credit card statement ) and contact your local Bosch service centre ,in most cases it will be repaired under warranty .
Hope this helps

Mar 12, 2010 | Bosch 13624 24V Cordless Hammer Drills

2 Answers

I have a Black Max 24V, model JD610424 and when I put the battery in the charger, nothing happens. I just cannot charge the battery. ****


Black Max 24v power drill

Allied International sells them at 1-800-248-6657, drill part # JDB240R. Have the part number from your drill available (on the label on side or top of drill...a number like 33643)

Mar 07, 2010 | Mx Black Max 24v Cordless 1/2 Inch Drill /...

1 Answer

Fixing the springs to the carbon brushers to a 24v battery bosch drill


The brushes come as an assembly with the spring and brush in one unit. If your springs are bad you can order a set of brushes. The part number is 2607034901 and they run around $6.50. If your springs are melted looking there may be an underlying problem with the motor, mainly that there is a short in the motor or even switch. If the brushes are just worn and not touching the commutator bars then it is safe to just replace the brush set and you should be ok. Any questions please post back.

Oct 12, 2009 | Bosch 13624 24V Cordless Hammer Drills

1 Answer

The screw to hold the chuck in place has brokern need new one


you can but a replacement screw from the drill manufacture or you can take the old one out and buy one from a local hardwarwe store that sell drills> did this to a dewalt about a year ago then found out the ww graingers carries all the replacement parts for this brand so you might try wickes first.

Apr 13, 2009 | Drills

1 Answer

Just stoped working


make sure that in the speed selector you are fully on speed 1,2,or 3...sometimes you can fall inbetween and then it will do that...otherwise you may have overheated the drill and will need to deal with Grainger or another auth. Bosch dealer for warranty...if they don't fix you, buy a Hilti

Mar 02, 2009 | Bosch 13624 24V Cordless Hammer Drills

Not finding what you are looking for?
Bosch 13624 24V Cordless Hammer Drills Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

woodzowl307

Level 3 Expert

652 Answers

Are you a Bosch Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...