Question about Refrigerators
If it is a frost free type it could be froze up.look for frost on the bottom back inside wall of the freezer,if you find frost there one of three things have failed,the defrost timer,the defrost heater or the defrost t-stat.if this is the case you will need to call your repair service to check it for you.too much electronics on all this stuff today i think.if on frost,check the cond. coil be hind the toe plate under the doors.this needs to be cleaned every 3 or 4 months.hope this helps.
Posted on Apr 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Red warning light on only
As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong. If you are hearing a clicking or buzzing then check out the last two tips.
If your refrigerator is running but warm, then…
Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...
Refrigerator Condenser Coil Cleaning Refrigerator Repair
Refrigerator Troubleshooting Refrigerator Compressor
Refrigerator Compressor Start Capacitor and Start Relay
Posted on Aug 28, 2010
Tips for a great answer:
Oct 06, 2015 | Freezers
Aug 24, 2015 | Freezers
May 30, 2015 | Freezers
May 25, 2015 | Refrigerators
May 26, 2011 | Refrigerators
Aug 28, 2010 | Refrigerators
Jul 18, 2010 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...
Jan 02, 2008 | Freezers
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: