Question about Riobel PR12BNW 4 piece deck mount faucet with hand shower

2 Answers

Are riobel faucets a good product - Riobel PR12BNW 4 piece deck mount faucet with hand shower

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

They are a very good fauce,they are one of the better ones out there I have had the pleasure of installing a few and haven't had any issues with them!!

Posted on May 09, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Any faucet sold in a "Faucet Shop" is junk. Any faucet that is made outside of the USA is junk (i.e; Grohe (European) is junk, but Grohe USA is fine. Why? Because real plumbing supply wholesale sells them and has replacement parts.
Not convinced yet? Then when your buying you expensive "decorator" faucet groups, ask the seller if they carry repair parts for everything they sell? You key to grabbing your debit card and hitting the exit door, is when the salesperson gives you a big-eyed stare of wonderment, at the question you just asked them. - Cardiff Plumbing & Leak Detection Co. 35-years of plumbing service and repair. Go fish.

Posted on May 08, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Elkay kitchen faucet model lk7124 replace stem


ELKAY ' Strainers, Fittings + Other Accessories for the Home

www.elkay.com/strainers-fittings-other
Results 1 - 15 of 91 - CERAMIC LONG STEM SQ MNTG COLD. 45921C. Brass. Price pending ... CERAMIC SHORT STEM SQ MNTG HOT. 45924C. Brass.

ELKAY ' Stainless Steel Kitchen Sinks, Faucets, Cabinets ...

www.elkay.com/
Elkay is an American-owned and operated innovative manufacturer of stainless steelkitchen sinks, faucets, foodservice products, cabinets, drinking fountains ...

[PDF]SPECIFICATIONS

aitcheson-dc.com/files/2012/07/EL.LK2432.pdf
LK2433 Dual handle, concealed mount mixing faucet. Metal ... (101.6mm). ModelLK2433 ... Hi-ArcĀ® Dual Handle Kitchen Faucets. Models ... Elkay warrants to the original consumer purchaser that the Elkay faucet pur- ... replacement parts (or if no longer available a comparable product) if the faucet ... METAL STEM.

Amazon.com: Elkay - Faucet Parts / Rough Plumbing: Tools ...

www.amazon.com > ... > Faucet Parts

Amazon.com, Inc.Results 1 - 24 of 921 - Elkay GOBG1118SS Dayton Kitchen Sink. by Elkay. $44.50 ...Elkay A51947R Replacement Diacore Cartridge with Brown Stem. by Elkay.

Elkay A51947R Replacement Diacore Cartridge with Brown ...

www.amazon.com/Elkay...Replacement.../B0033UX8...

Amazon.com, Inc

Jan 14, 2016 | Elkay Plumbing

1 Answer

How do i install my bath faucet riobel FI12LC?


Why can't you just follow the directions in the package?

Dec 16, 2014 | Plumbing

1 Answer

Have a moen brantford bathroom faucet. One handle has become very hard to turn. The hot water side turns fine, but you have to use muscle to turn on the cold. Does the handle need to be replaced or the...


It usually takes a special tool to remove a Moen cartridge. Just getting the handle off can be tough. How long have you had this unit? maybe it would be cheaper just to replace the whole thing. My last Moen lasted a good twenty years, still working good, but finally starting to corrode. Good product.

Nov 30, 2013 | Moen 6610 Brantford Two Handle Lavatory...

1 Answer

Dripping faucet price pfister kitchen


Very nice kitchen faucet. I like Price Pfister's products. To repair it you will need a phillips screwdriver to remove the handles and crescent wrench to remove the cartridges. If it is dripping then one of the faucet cartridges need to be replaced. Its best to replace both cartridges as inevitably the other one will start to leak after you've replaced the troublesome one. Your local hardware store or plumbing supply store should have a replacement cartridge for this model. Remove one of the cartridges and take it with you to ensure you get the correct part. There is an exploded diagram of your faucet on the Price Pfister site at that shows the part number for the cartridge. Good luck and let me know how it turns out.http://www.pricepfister.com/www/ImageAssets/mirror/model/kitchen/savannah/savf8h6-85/ex-036-01.pdf

Jul 25, 2010 | Price Pfister Savannah Two-Handle Kitchen...

1 Answer

Our jameco kitchen faucet has no water pressure. also we have a slow leak on the cold water side. The faucet is only 3 years old. we took the cold side apart and there is no washers, only an o ring that...


Sounds like you may need to replace the cartridge if you have one of the late model single control models. You may get a clue as to how your faucet might be put together by finding a similar faucet on the Moen web site, and looking at their exploded parts diagram. (They are good about posting information; although some say their products are not so good; I really don't know personally)

Dec 14, 2009 | Delta 2402 Classic Single Handle Kitchen...

1 Answer

The faucet was leaking and nut wouldn't come off



There are several tools you can use to remove stripped nuts and bolts, here are pics of two different types. You might also want to try using a good set of chanel lock pipe wrench or vice grips


100_2850%20bolt%20out.jpgnut_breaker.jpg








This is a common problem, and often times it is impossible to remove the nut without damaging/destroying the faucet.

You may also want to invest in a basin wrench. It will make removal and installetion MUCH easier.

This is a basin wrench.
basinwrench-777517.jpg

You are wise to go with Moen. They make a great product, offer lifetime warranties and have great customer service.

Oct 03, 2009 | Delta Faucet DELTA/PEERLESS FAUCET CO....

1 Answer

Looking for parts breakdown picture for DANZE NSF 61 Kitchen Faucet Any Links?


NSF 61(-9) is a standard rather than the model number (it's often very difficult to identify the model number. If you are able to find the model number, the link attached has all the technical specs for Danze products (even discontinued ones). http://www.danze.com/tech_specs.asp

Otherwise, I suggest browsing their faucet section until you find yours.

Good luck.

Sep 13, 2009 | Plumbing

1 Answer

American Standard single handle faucet


if it is 25 yrs old it might be to your favor to just replace the fixture.parts for something this old may be hard to find good luck.

Apr 22, 2009 | American Standard Reliant+ 4 In. Single...

Not finding what you are looking for?
Riobel PR12BNW 4 piece deck mount faucet with hand shower Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riobel Plumbing Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

15557 Answers

Tom Chichester

Level 3 Expert

34242 Answers

Are you a Riobel Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...