Question about EliteGroup ECS 761GX-M754(3.0A) Socket 754/761GX/FSB1600/A&V&L/PCI-E Motherboard (MOTEC09)
Posted on Jun 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ECS 761GX-M754 Problem
Hey there freemantle78, there are many thing to check over. My first step would be to check all your ram to ensure you are using the correct type. In this case DDR-400/333/266/200 single sided only. Also ensure if you just have just one stick, that it is in the dimm closest to the CPU. Remove it and reseat it, ensuring you get the clicks and the levers on both sides to come up on their own when seating. My next step would be to ensure your monitor is connected to the onboard video port, and not a video card, which you will need to enable in the bios setup later, along with installing drivers. Also ensure the connections made to the motherboard via the power supply, and the frontpanel controls are correctly configured. Consult your mobo manual for details I hope this helps.Good Luck!
Posted on Jan 28, 2008
After the POST (Power On Self Test), and before it begins loading Windows, push the F8 key, to get a screen of boot options Select the Option "Halt on Error", and then proceed. If there is a Windows crash, it will end with a blue screen, and a bunch of error codes. Reply back if this works, because I need to know the errror code to see why it is crashing.
Also, has the system booted before with this motherboard? Did you recently install it, replacing an existing motherboard? If so, that would explain a lot, because some motherboards have a different chipset and IDE controller, which will cause the IDE drives to not be readable.
Still, a bit more info from you would help narrow the problem down.
Posted on Nov 10, 2008
SOURCE: I was given a used
To reset the bios password: Remove the cmos battery for about 5 minutes, replace & reboot. Hope this helps & please remember to rate my answer. Thanks.
Posted on Feb 02, 2009
Here is the link where you can download all the driver for this MOBO.
Posted on Feb 15, 2010
Tips for a great answer:
Mar 03, 2011 | EliteGroup ECS 761GX-M754(3.0A) Socket...
Feb 19, 2011 | EliteGroup ECS 761GX-M754(3.0A) Socket...
Jan 29, 2011 | EliteGroup ECS 761GX-M754(3.0A) Socket...
Dec 19, 2010 | Computers & Internet
Aug 01, 2010 | EliteGroup ECS 761GX-M754(3.0A) Socket...
Feb 15, 2010 | EliteGroup ECS 761GX-M754(3.0A) Socket...
May 04, 2009 | EliteGroup ECS 761GX-M754(3.0A) Socket...
Nov 10, 2008 | EliteGroup ECS 761GX-M754(3.0A) Socket...
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: